3200i Indicator and alarm unit
3200i Indicator and alarm unit
3204i, 32h8i, 3216i – Accurate indication of temperature and process measurements
The Eurotherm range of 3200i indicators offer accurate indication of temperature and process measurements. Process interlocks, including overtemperature furnace limits, are implemented using relay output channels.
The emphasis is on ease of use. A simple ‘Quick Start’ code is used to configure all the functions essential for indication and protecting your process.
Description
Ideal for:
- Temperature & process indication
- Level/pressure/flow
- Process protection
- Heat treatment – furnace over temperature
- Plastics – extrusion melt pressure
- Weighing platform
Specification
| Input Type | Custom, mA, mV, RTD, TC |
|---|---|
| Panel size (DIN) | 1/16, 1/4, 1/8 |
| IP Rating | IP65, NEMA 12 / NEMA 4X (3216 Only) |
| Control Types | 3216i, 3204i: 4 Digit LCD plus 5 character alphanumeric, 32h8i: 5 Digit LCD plus 9 character alphanumeric |
| Alarm Types | Dev, Hi, Lo, Rate, Sensor Break |
| Supply Voltage | 100-264V ac, 24V dc/ac |
| Transmitter Power Supply | 24V dc, None |
| No of Alarms | 3 |
| Safety-approvals | EN14597/TW, Factory Mutual (FM) approved |
| PC Configuration | Graphical wiring |
| Transducer Power Supply | 10V dc, None |
| User Calibration | 5 point, Auto Tare, Load Cell, Shunt |
| No of Relay Outputs | 3216i: 3 32h8i, 3204i: 2 |
| Digital IP/Logic OP | 2/0 |
| Retransmission | 3216i: Non isolated 32h8i, 3204i: Isolated |
| Slave Comms | Modbus RTU |
| Melt Pressure | 3216i, 3204i: No 32h8i: Yes |
| PV Input Selection | None |