Product Category

Ancillary Equipment

I/O Signal conditioning

Omni Series

Ultra SlimPak

Ultra SlimPak II

Probes

Sensors

Thermocouples

Ultra SlimPak

Ultra SlimPak

DIN Rail Mount Signal Conditioners, Isolators, & Alarms

Ultra SlimPaks are high density, DIN Rail mount, setpoint limit alarm and isolating signal conditioner modules. All Ultra SlimPak modules utilise Action’s advanced, ASIC-based design for field configurable input and output flexibility.

Description

  • Field Configurable
  • Wide Ranging
  • High Density DIN Rail Mount
  • ASIC Based Design for Maximum Reliability
Ordering Information
Part numberFunctionInputInput Span (Field Configurable)Housing WidthOutput (Field Configurable)
G408     
 IsolatorDC Volts10mV to 100V12.6mmDC Voltage (0-5V, 0-10V)
  DC Current1mA to 100mA DC Current (0-1mA, 0-20mA, 4-20mA)
G408-1001     
 IsolatorDC Volts10mV to 100V12.6mmDC Voltage (-5 to +5V, -10 to +10V)
  DC Current1mA to 100mA  
G108     
 Limit Alarm 10mV to 200V17.5mmAlarm (Dual SPDT Relay)
   1mA to 100mA  
G418     
 Isolator3 Wire RTDPlatinum: 100, 500, 1000 Ohm with 16 ranges from -200 to 600°C down to -18 to 50°C17.5mmDC Voltage (0-5V, 0-10V)
   Copper: 10, 25, 100 Ohm with 9 ranges from -200 to 260°C down to -18 to 50°C DC Current (0-1mA, 0-20mA, 4-20mA)
   (50%adjustment in any range)  
G118     
 Isolator3 Wire RTDPlatinum: 100, 500, 1000 Ohm with 16 ranges from -200 to 600°C down to -18 to 50°C17.5mmAlarm (Dual SPDT Relay)
   Copper: 10, 25, 100 Ohm with 9 ranges from -200 to 260°C down to -18 to 50°C  
   (50%adjustment in any range)  
G428     
 IsolatorThermocoupleType B: 500 to 1820°C12.6mmDC Voltage (0-5V, 0-10V)
   Type E: -150 to 1000°C DC Current (0-1mA, 0-20mA, 4-20mA)
   Type J: -200 to 750°C  
   Type K: -200 to 1370°C  
   Type R/S: 50 to 1760C  
   Type T: -150 to 400C  
G128     
 Limit AlarmThermocoupleType B: 500 to 1820°C17.5mmAlarm (Dual SPDT Relay)
   Type E: -150 to 1000°C  
   Type J: -200 to 750°C  
   Type K: -200 to 1370°C  
   Type R/S: 50 to 1760C  
   Type T: -150 to 400C  
G438     
 IsolatorPotentiometer100 ohms to 100k ohms12.6mmDC Voltage (0-5V, 0-10V)
     DC Current (0-1mA, 0-20mA, 4-20mA)
G448     
 IsolatorStrain Gauge0 to 200mV17.5mmDC Voltage (0-5V, 0-10V)
   +/-5mV to +/-200mV DC Current (0-1mA, 0-20mA, 4-20mA)
   Excitation: 1-10VDC @ 120 mA  
G468     
 IsolatorAC Volts50mV AC to 250VAC12.6mmDC Voltage (0-5V, 0-10V)
  AC Current50mA AC to 100mA AC DC Current (0-1mA, 0-20mA, 4-20mA)
G168     
 Limit AlarmAC Volts50mV AC to 250VAC17.5mmAlarm (Dual SPDT Relay)
  AC Current50mA AC to 100mA AC  
G478     
 IsolatorFrequency2Hz to 10kHz12.6mmDC Voltage (0-5V, 0-10V)
     DC Current (0-1mA, 0-20mA, 4-20mA)
WV905     
 Power SupplyAC Power100 to 240VAC, 50 to 60Hz22.5mm24VDC @ 500mA
 

Specification

Special Features

ASIC reliability

Mounting

High density DIN rail

Input Type

AC Volts/Current, DC Volts/Current, Frequency, mV, Potentiometer, RTD, Strain Gauge, Thermocouple

Output Types

0-10V dc, 0-1mA dc, 0-20mA dc, 0-5V dc, 2 SPDT relay(s), 4-20mA dc

Isolation

1800V Input/Output/Power

Power Rating

9-30V dc, G448 18-30V

Wiring

Fixed terminals

Calibration via

G478 TouchCal, तनाव नापने का यंत्र