Built-in Power Supply Photoelectric Sensor
E3JM
Model Contribute to Overall Cost Reduction
Caution for Through-beam Type of E3JM/E3JK
In order to get CCC and CE marks of certification, a design change was made for E3JM/E3JK. The receivers and emitters of the former product and the redesigned product are not interchangeable. Using these products together could lead to operation failure. When either a receiver or an emitter needs replacement, please change both as a set.
Look for the "N" suffix on the product code to indicate the new, redesigned version. Consult the table below for use of the former and redesigned receivers and emitters.
|
Emitter |
Receiver |
Operation |
|
Former emitter |
Former receiver |
OK |
|
Redesigned emitter |
Redesigned receiver |
OK |
|
Redesigned emitter |
Former receiver |
OK |
|
Former emitter |
Redesigned receiver |
NG |
Sensors
Connection method: Terminal block
Operation mode: Light-ON, Dark-ON (switch selectable)
|
Sensing |
Appearance |
Sen- |
Output |
Func- |
Model |
||
|
Conduit socket |
Conduit socket |
Conduit socket |
|||||
|
Through- |
|
10 m |
Relay |
--- |
E3JM-10M4-NN |
E3JM-10M4-G-NN |
E3JM-10M4-NN-US |
|
|
E3JM-10M4T-NN |
E3JM-10M4T-G-NN |
E3JM-10M4T-NN-US |
||||
|
DC SSR |
--- |
E3JM-10S4-NN |
E3JM-10S4-G-NN |
E3JM-10S4-NN-US |
|||
|
|
E3JM-10S4T-NN |
E3JM-10S4T-G-NN |
E3JM-10S4T-NN-US |
||||
|
Retro- |
|
4 m |
Relay |
--- |
E3JM-R4M4 |
E3JM-R4M4-G |
E3JM-R4M4-US |
|
|
E3JM-R4M4T |
E3JM-R4M4T-G |
E3JM-R4M4T-US |
||||
|
DC SSR |
--- |
E3JM-R4S4 |
E3JM-R4S4-G |
E3JM-R4S4-US |
|||
|
|
E3JM-R4S4T |
E3JM-R4S4T-G |
E3JM-R4S4T-US |
||||
|
Diffuse- |
|
700 mm |
Relay |
--- |
E3JM-DS70M4 |
E3JM-DS70M4-G |
E3JM-DS70M4-US |
|
|
E3JM-DS70M4T |
E3JM-DS70M4T-G |
E3JM-DS70M4T-US |
||||
|
DC SSR |
--- |
E3JM-DS70S4 |
E3JM-DS70S4-G |
E3JM-DS70S4-US |
|||
|
|
E3JM-DS70S4T |
E3JM-DS70S4T-G |
E3JM-DS70S4T-US |
||||
*Through-beam Sensors are sold in sets that include both the Emitter and Receiver. An order for the Emitter or Receiver alone cannot be accepted.
Note: Tightening nuts, washers, and rubber bushings are not provided with UL-listed models.
Accessories (Order Separately)
Slit
(A Slit is not provided with the Sensor for through-beam. Order a Slit separately if required.)
|
Slit |
Sensing distance |
Minimum |
Model |
Quantity |
Remarks |
|
|
1 mm × |
E3JM-10[]4(T)-NN |
1.2 m |
1-mm dia. |
E39-S39 |
1 Slit each for the |
(Seal-type long slit) |
Reflectors
(A Reflector is required for each Retro-reflective Sensor.)
The E39-R1 Reflector is provided with the Sensor. Order other Reflectors separately if required.
|
Name |
Sensing distance |
Model |
Quantity |
Remarks |
|
|
Reflectors |
E3JM-R4[]4(T) |
4 m |
E39-R1 |
1 |
Provided with the E3JM-R4[]4(T), |
Note: Refer to Reflectors on E39-L/E39-S/E39-R on your TecTesla website for details.
Mounting Bracket
Some Mounting Brackets are provided with the Sensor. Order other Mounting Brackets separately if required. (Refer to E39-L/E39-S/E39-R)
|
Appearance |
Model |
Quantity |
Remarks |
|
|
E39-L53 |
1 |
Provided with the E3JM. |
|
|
E39-L51 |
1 |
Height of optical axis can be adjusted. |
Note: 1. When using a Through-beam Sensor, order one Connector for the Receiver and one for the Emitter.
2. Refer to Mounting Brackets on E39-L/E39-S/E39-R on your TecTesla website for details.