Lighting for Image Processing
FL Series
Next generation ODR technology
MDMC Light FL-MD Series
|
Model |
FL-MD90MC |
FL-MD180M |
|
Applicable controller |
FH series |
|
|
Applicable camera |
FH-S series, FZ-S series |
|
|
Lighting color |
R: Red (Typ.635nm), G: Green (Typ.525nm), B: Blue (Typ.465nm) |
|
|
Light source |
LED |
|
|
LED safety |
W,B: Risk Group 2, R,G: Risk Group 1 |
W,G,B: Risk Group 2, R: Risk Group 1 |
|
Power supply voltage |
24 VDC±10% (including ripple) |
|
|
Recommended power |
S8VK-G12024 (manufactured by OMRON, 24 VDC, 5 A, 120 W) |
|
|
Current consumption |
1.5 A max. |
3.0 A max. |
|
Drive method |
Constant voltage method |
|
|
Lighting method |
Trigger lighting |
|
|
Luminance control |
Duty light adjustment: PWM frequency of 200 kHz, light adjustment of 128 levels |
|
|
Trigger lighting |
Lighting in synchronization with trigger input timing from the controller (configured with vision |
|
|
Lighting duration setting |
Auto setting in accordance with shutter speed. |
|
|
Lighting time control |
Set with vision system controller or set in accordance with shutter speed. |
|
|
External interface |
Camera connection cable (directly connected with the main unit) Cable length: 500 mm |
|
|
Ambient temperature |
Operating: 0 to 40°C, Storage: -15 to 60°C (with no icing or condensation) |
|
|
Ambient humidity |
Operating and storage: 35% to 85% (with no condensation) |
|
|
Degree of protection |
IP20 (IEC60529) |
|
|
Vibration resistance |
10 to 150 Hz, (0.35 mm half-amplitude) 80 min each in X, Y, and Z directions |
|
|
Shock resistance |
150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward) |
|
|
Material |
Case: Aluminum, PC, PMMA Cable: PVC |
|
|
Weight |
Approx. 0.8 kg |
Approx. 3.0 kg |
|
Accessories |
Instruction Sheet, Compliance Sheet, 24 V power supply terminal block (male) |
|
Note:
1. Turn ON the power of this product and vision system controller at the same time or this product first.
2. This light complies with the EN standard (EN61326-1)
(Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2))
Also, the following condition is applied to the immunity test of this product.
There may be cases that light brightness fluctuates within 10%.
3. This light complies with the KC standard.
Photometric Stereo Light FL-PS Series
|
Model |
FL-PS90W |
FL-PS140W |
FL-PS260W |
|
Applicable controller |
FL-TCC1PS |
||
|
Lighting color |
W: White |
||
|
Light source |
LED |
||
|
LED safety |
Risk group 2 |
||
|
Power consumption |
32W |
47W |
61W |
|
Ambient temperature |
Operating: 0 to 40°C Storage: -15 to 60°C (with no icing nor no condensation) |
||
|
Ambient humidity |
Operating and storage: 35% to 85% (no condensation) |
||
|
Degree of protection |
IP20 (IEC60529) |
||
|
Vibration resistance (destructive) |
10 to 150 Hz, (0.35mm half-amplitude) 80 min. each in X, Y, and Z directions |
||
|
Shock resistance (destructive) |
150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward) |
||
|
Materials |
Case: Aluminum, PMMA |
||
|
Weight |
Approx. 200g |
Approx. 350 |
Approx. 800g |
|
Accessories |
INSTRUCTION SHEET (THIS SHEET), Compliance Sheet |
||
Bar Light FL-BR Series
|
Model |
Wide Area |
High- |
Wide Area |
High- |
Wide Area |
High- |
|
FL- |
FL- |
FL- |
FL- |
FL- |
FL- |
|
|
Light source |
White LEDs |
|||||
|
Vibration resistance |
10 to 150 Hz (Double amplitude: 0.7 mm), 80 min each in X, Y, and Z directions |
|||||
|
Shock resistance |
150 m/s2 3 times each in 6 directions |
|||||
|
Ambient temperature |
Operating: 0 to 40°C, Storage: -15 to 60°C (with no icing or condensation) |
|||||
|
Ambient humidity |
Operating/storage: 35% to 85% (with no condensation) |
|||||
|
Ambient atmosphere |
No corrosive gases. |
|||||
|
Degree of protection |
IEC60259 IP20 |
|||||
|
Weight |
Approx. 40 g |
Approx. 70 g |
Approx. 100 g |
|||
|
Materials |
Case: Aluminum; Cover, side parts, and lens: PC; Cable: Heat resistant polyvinyl chloride; |
|||||
|
LED safety |
Risk Group 2 (IEC 62471) |
|||||
|
Accessories |
Instruction sheet |
|||||
The color of white LEDs can vary due to intrinsic characteristics.
Confirm suitability for the application in advance.
Direct Ring Light FL-DR Series
|
Model |
Wide Area |
High- |
Wide Area |
High- |
Wide Area |
High- |
|
FL-DR32W |
FL-DR32W-H |
FL-DR50W |
FL-DR50W-H |
FL-DR90W |
FL-DR90W-H |
|
|
Light source |
White LEDs |
|||||
|
Vibration resistance |
10 to 150 Hz (Double amplitude: 0.7 mm), 80 min each in X, Y, and Z directions |
|||||
|
Shock resistance |
150 m/s2 3 times each in 6 directions |
|||||
|
Ambient temperature |
Operating: 0 to 40°C, Storage: -15 to 60°C (with no icing or condensation) |
|||||
|
Ambient humidity |
Operating/storage: 35% to 85% (with no condensation) |
|||||
|
Ambient atmosphere |
No corrosive gases. |
|||||
|
Degree of protection |
IEC60259 IP20 |
|||||
|
Weight |
Approx. 25 g |
Approx. 30 g |
Approx. 70 g |
Approx. 80 g |
||
|
Materials |
Case and Lens: PC, Cable: Heat resistant polyvinyl chloride, |
|||||
|
LED safety |
Risk Group 2 (IEC 62471) |
|||||
|
Accessories |
Instruction sheet |
|||||
The color of white LEDs can vary due to intrinsic characteristics.
Confirm suitability for the application in advance.
Camera-mount Lighting Controller for FL Series FL-TCC Series
Lighting Controller
|
Product type |
Lighting Controller |
|
|
Model |
FL-TCC1 |
|
|
Input voltage |
Supplied from applicable camera. |
|
|
Applicable camera |
FH-S/SC/S02/SC02/S04/SC04, FZ-S/SC/S2M/SC2M/S5M2/SC5M2/SH/SHC/SF/SFC/ |
|
|
Applicable controller |
FH series |
|
|
Power consumption |
10 W, 0.9 A max. (including the lighting section) |
|
|
Number of output channels |
1 |
|
|
Applicable light |
FL-[] series |
|
|
Luminance |
Functions |
PWM frequency: 100 kHz, Light adjustment: 255 levels (set with the Controller) |
|
Trigger lighting |
Lighting ON synchronized with trigger input timing from the Controller. |
|
|
Trigger lighting |
Ton: 30 μs max. (Trigger ready μs) |
|
|
External interface |
Dedicated communication connector |
|
|
Ambient temperature |
Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation) |
|
|
Ambient humidity |
Operating/storage: 35% to 85% (with no condensation) |
|
|
Vibration resistance |
10 to 55 Hz, (0.7 mm double amplitude) 80 min each in X, Y, and Z directions |
|
|
Shock resistance |
150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward) |
|
|
Materials |
Case: SECC, Cable: PVC |
|
|
Degree of protection |
IP20 (IEC60529) |
|
|
Weight |
Approx. 110 g |
|
|
Accessories |
Instruction sheet, Insulation sheet, Mounting screw (M2 ✕ 6 mm) ✕ 4 |
|
|
Applicable standards |
EN61326-1 *, KC |
|
* Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)
Also, the following condition is applied to the immunity test of this product.
There are case that Lighting brightness fluctuate Max 10%.
Digital Lighting Controller for FL series FL-STC Series
|
Product type |
One-channel models |
Two-channel models |
|||
|
I/O type |
NPN |
PNP |
NPN |
PNP |
|
|
Model |
FL-STC10 |
FL-STC15 |
FL-STC20 |
FL-STC25 |
|
|
Power supply voltage |
24 VDC±10% (including ripple) |
||||
|
Power consumption |
36 W, 1.5 A max. (including the lighting |
72 W, 3 A max. (including the lighting |
|||
|
Number of output channels |
1 |
2 |
|||
|
Applicable light |
FL-[] Series |
||||
|
Luminance |
CONTINUOUS |
While the Strobe Controller power source is ON, light is continuously emitted. |
|||
|
EXTERNAL |
Lighting in synchronization with an external trigger input. |
||||
|
STOROBE |
Lighting in synchronization with the external trigger input, but twice brighter than |
||||
|
Luminance |
Key |
Luminance control method and adjustment value: Slide switch and cross key setting |
|||
|
I/O |
Luminance adjustment value: 9-bit binary input control |
||||
|
External interface |
Parallel I/O connector (D-sub 15-pin), Terminal block (external trigger input with 2 |
||||
|
Ambient temperature |
Operating: 0 to 40°C, Storage: -15 to 60°C (with no icing or condensation) |
||||
|
Ambient humidity |
Operating/storage: 35% to 85% (with no condensation) |
||||
|
Vibration resistance |
10 to 150 Hz (0.7 mm double amplitude), 80 min each in X, Y, and Z directions |
||||
|
Shock resistance |
150 m/s2 3 times each in 6 direction (up/down, left/right, forward/backward) |
||||
|
Materials |
Case: PC |
||||
|
Degree of protection |
IEC60529 IP20 |
||||
|
Weight |
Approx. 100 g |
||||
|
Accessories |
Instruction sheet,Terminal block connector |
||||
|
Applicable standards |
EN61326-1 *, KC |
||||
* Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)
Also, the following condition is applied to the immunity test of this product.
There are case that Lighting brightness fluctuate Max 10%.
Lighting Controller for Photometric Stereo Lights FL-TCC1PS Series
|
Model |
FL-TCC1PS |
|
Applicable vision |
FH series (Ver.6.00 or higher) |
|
Applicable camera |
FH-S series, FZ-S series |
|
Applicable light |
FL-PS series |
|
Number of channels |
1 |
|
Power supply voltage * |
24 VDC±10% (including ripple) |
|
Recommended |
S8VK-G12024 (manufactured by OMRON, 24 VDC, 5 A 120 W) |
|
Current consumption |
3.0 A max. |
|
Drive method |
Constant voltage method |
|
Luminance control method |
Duty light adjustment: light adjustment of 255 levels (configured with vision system |
|
Trigger lighting |
Lighting in synchronization with trigger input timing from the controller (configured with |
|
Lighting duration setting |
Auto setting in accordance with shutter speed. |
|
Lighting time control |
Set with vision system controller or set in accordance with shutter speed. |
|
External interface |
Camera connection cable (directly connected with the main unit) 400 mm |
|
Ambient temperature |
Operating: 0 to 40°C Storage: -15 to +60°C (with no icing nor no condensation) |
|
Ambient humidity |
Operating and storage: 35% to 85% (with no condensation) |
|
Degree of protection |
IP20 (IEC60529) |
|
Vibration resistance |
10 to 150 Hz, (0.35mm half-amplitude) 80 min. each in X, Y, and Z directions |
|
Shock resistance |
150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward) |
|
Material |
Case: Alminum, Cable: PVC, Camera Mount Plate: POM |
|
Weight |
Approx. 200 g |
|
Accessories |
Instruction Sheet (this Sheet), 24 V power supply terminal block (male), camera mount |
Note:
1. When supplying the power to this lighting controller, make sure to turn ON the power to this lighting controller first or at the same time with the vision system controller.
2. When FL-PS260W is used in the length of the power supply line at least 15m, adjust the power voltage to become 24-26.4 V.
3. This lighting complied with the EN standard (EN61326-1)
(Electromagnetic environment : Industrial electromagnetic environment (EN/IEC 61326-1 Table 2))
Also, the following condition is applied to the immunity test of this product.
There are case that Lighting brightness fluctuate Max 10%.
4. This light complies with the KC standard.