Electrode Holder
BF-[](R) / BS-1(T)
Complete Lineup for Use in High-temperature, High-pressure Environments or Where Exposed to Chemicals
|
Model |
BF-1 |
BF-3(R) *1 |
BF-5(R) *1 |
BS-1 |
BS-1T |
|
No. of Electrodes |
1 |
3 |
5 |
--- |
--- |
|
Insulator material |
PPS resin (Metallic section is SUS.) |
Fluorocarbon polymer (PFA) |
|||
|
Insulation resistance |
100 MΩ |
||||
|
Operating temperature |
Electrode section: -10 to 150°C (with no icing) |
250°C max. |
180°C max. |
||
|
Operating pressure |
Atmospheric pressure |
1.96 MPa *2 |
981 kPa *2 |
||
|
Applications |
Liquids with low specific |
General applications for purified water |
Boiler water level |
Acid or alkaline |
|
1. Two-wire Electrode Holders (R models) have a built-in resistance of 6.8 kΩ. They should be used with the Two-wire 61F Controllers.
2. Vapor leakage may occur when used outside of the specified operating temperature and pressure range. Use the Electrode Holder within the specified maximum operating temperature and pressure range according to the following pressure-temperature curve.
