Color Fiber Amplifier Unit
E3NX-FA
The Advanced Fiber Amplifier Units That Handles On-site Needs
Fiber Amplifier Units
|
Type |
Connecting |
Appearance |
Inputs/ |
Model |
|
|
NPN output |
PNP output |
||||
|
Standard |
Pre-wired (2 m) |
|
1 output |
E3NX-FA11 2M |
E3NX-FA41 2M |
|
E3NX-FA11-5 2M *1 |
--- |
||||
|
Wire-saving Connector |
|
1 output |
E3NX-FA6 |
E3NX-FA8 |
|
|
Advanced |
Pre-wired (2 m) |
|
2 outputs |
E3NX-FA21 2M |
E3NX-FA51 2M |
|
Wire-saving Connector |
|
1 output |
E3NX-FA7 |
E3NX-FA9 |
|
|
2 outputs |
E3NX-FA7TW |
E3NX-FA9TW |
|||
|
M8 Connector |
|
1 output |
E3NX-FA24 |
E3NX-FA54 |
|
|
2 outputs |
--- |
E3NX-FA54TW |
|||
|
Infrared |
Pre-wired (2 m) |
|
1 output |
E3NX-FAH11 2M |
E3NX-FAH41 2M |
|
Wire-saving Connector |
|
1 output |
E3NX-FAH6 |
E3NX-FAH8 |
|
|
Analog output |
Pre-wired (2 m) |
|
2 outputs |
E3NX-FA11AN 2M |
E3NX-FA41AN 2M |
|
Model for Sensor |
Connector for Sensor |
|
--- |
E3NX-FA0 |
|
|
E3NX-FAH0 |
|||||
|
Connector for Sensor |
|
1 output |
E3NX-FA10 2M |
E3NX-FA40 2M |
|
1. This type can prevent mutual interference for two units in the SHS2 mode.
2. A Sensor Communications Unit is required if you want to use the Fiber Amplifier Unit on a network.
Accessories (Sold Separately)
Wire-saving Connectors (Required for models for Wire-saving Connectors.)
Connectors are not provided with the Fiber Amplifier Unit and must be ordered separately.
Note: Protective stickers are provided.
|
Type |
Appearance |
Cable |
No. of |
Model |
Applicable Fiber Amplifier Units |
|
Master Connector |
|
2 m |
4 |
E3X-CN21 |
E3NX-FA7 |
|
Slave Connector |
|
2 |
E3X-CN22 |
||
|
Master Connector |
|
3 |
E3X-CN11 |
E3NX-FA6 |
|
|
Slave Connector |
|
1 |
E3X-CN12 |
Sensor I/O Connectors (Required for models for M8 Connectors.)
Connectors are not provided with the Fiber Amplifier Unit and must be ordered separately.
|
Size |
Cable |
Appearance |
Cable type |
Model |
||
|
M8 |
Standard cable |
Straight |
|
2m |
4-wire |
XS3F-M421-402-A |
|
5m |
XS3F-M421-405-A |
|||||
|
L-shaped |
|
2m |
XS3F-M422-402-A |
|||
|
5m |
XS3F-M422-405-A |
|||||
Mounting Bracket
A Mounting Bracket is not provided with the Fiber Amplifier Unit. It must be ordered separately as required.
|
Appearance |
Model |
Quantity |
|
|
E39-L143 |
1 |
DIN Track
A DIN Track is not provided with the Fiber Amplifier Unit. It must be ordered separately as required.
|
Appearance |
Type |
Model |
Quantity |
|
|
Shallow type, total length: 1 m |
PFP-100N |
1 |
|
Shallow type, total length: 0.5 m |
PFP-50N |
||
|
Deep type, total length: 1 m |
PFP-100N2 |
End Plate
Two End Plates are provided with the Sensor Communications Unit.
End Plates are not provided with the Fiber Amplifier Unit. They must be ordered separately as required.
|
Appearance |
Model |
Quantity |
|
|
PFP-M |
1 |
Cover
Attach these Covers to Amplifier Units.
Order a Cover when required, e.g., if you lose the covers.
|
Appearance |
Model |
Quantity |
|
|
E39-G25 FOR E3NX-FA |
1 |
Related Products
Sensor Communications Units
|
Type |
Appearance |
Model |
|
Sensor Communications Unit for EtherCAT |
|
E3NW-ECT |
|
Sensor Communications Unit for CompoNet |
|
E3NW-CRT *1 |
|
Sensor Communications Unit for CC-Link |
|
E3NW-CCL |
|
Distributed Sensor Unit *2 |
|
E3NW-DS |
Refer to your OMRON website for details.
1. E3NX-FAH0 can not be connected.
2. The Distributed Sensor Unit can be connected to any of the Sensor Communications Units.
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
CompoNet is a registered trademark of the ODVA.
CC-Link is a registered trademark of Mitsubishi Electric Corporation. The trademark is managed by the CC-Link Partner Association.