MDMC Light FL-MD Series

Model

FL-MD90MC

FL-MD180M

Applicable controller

FH series

Applicable camera

FH-S series, FZ-S series

Lighting color
 (peak wavelength)

R: Red (Typ.635nm), G: Green (Typ.525nm), B: Blue (Typ.465nm)

Light source

LED

LED safety

W,B: Risk Group 2, R,G: Risk Group 1

W,G,B: Risk Group 2, R: Risk Group 1

Power supply voltage

24 VDC±10% (including ripple)

Recommended power
 supply

S8VK-G12024 (manufactured by OMRON, 24 VDC, 5 A, 120 W)

Current consumption

1.5 A max.

3.0 A max.

Drive method

Constant voltage method

Lighting method

Trigger lighting

Luminance control
 method

Duty light adjustment: PWM frequency of 200 kHz, light adjustment of 128 levels
 (configured with vision system controller)

Trigger lighting

Lighting in synchronization with trigger input timing from the controller (configured with vision
 system controller).

Lighting duration setting

Auto setting in accordance with shutter speed.

Lighting time control

Set with vision system controller or set in accordance with shutter speed.

External interface

Camera connection cable (directly connected with the main unit) Cable length: 500 mm

Ambient temperature

Operating: 0 to 40°C, Storage: -15 to 60°C (with no icing or condensation)

Ambient humidity

Operating and storage: 35% to 85% (with no condensation)

Degree of protection

IP20 (IEC60529)

Vibration resistance

10 to 150 Hz, (0.35 mm half-amplitude) 80 min each in X, Y, and Z directions

Shock resistance

150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward)

Material

Case: Aluminum, PC, PMMA Cable: PVC

Weight

Approx. 0.8 kg

Approx. 3.0 kg

Accessories

Instruction Sheet, Compliance Sheet, 24 V power supply terminal block (male)

Note:                                                                                                                      
 1. Turn ON the power of this product and vision system controller at the same time or this product first.
 2. This light complies with the EN standard (EN61326-1)
 (Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2))
 Also, the following condition is applied to the immunity test of this product.
 There may be cases that light brightness fluctuates within 10%.
 3. This light complies with the KC standard.

Photometric Stereo Light FL-PS Series

Model

FL-PS90W

FL-PS140W

FL-PS260W

Applicable controller

FL-TCC1PS

Lighting color

W: White

Light source

LED

LED safety

Risk group 2

Power consumption

32W

47W

61W

Ambient temperature

Operating: 0 to 40°C Storage: -15 to 60°C (with no icing nor no condensation)

Ambient humidity

Operating and storage: 35% to 85% (no condensation)

Degree of protection

IP20 (IEC60529)

Vibration resistance (destructive)

10 to 150 Hz, (0.35mm half-amplitude) 80 min. each in X, Y, and Z directions

Shock resistance (destructive)

150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward)

Materials

Case: Aluminum, PMMA

Weight

Approx. 200g

Approx. 350

Approx. 800g

Accessories

INSTRUCTION SHEET (THIS SHEET), Compliance Sheet

Bar Light FL-BR Series

Model

Wide Area
 Model

High-
 brightness
 Model

Wide Area
 Model

High-
 brightness
 Model

Wide Area
 Model

High-
 brightness
 Model

FL-
 BR5020W

FL-
 BR5020W-H

FL-
 BR9120W

FL-
 BR9120W-H

FL-
 BR13120W

FL-
 BR13120W-H

Light source

White LEDs

Vibration resistance

10 to 150 Hz (Double amplitude: 0.7 mm), 80 min each in X, Y, and Z directions

Shock resistance

150 m/s2 3 times each in 6 directions

Ambient temperature

Operating: 0 to 40°C, Storage: -15 to 60°C (with no icing or condensation)

Ambient humidity

Operating/storage: 35% to 85% (with no condensation)

Ambient atmosphere

No corrosive gases.

Degree of protection

IEC60259 IP20

Weight

Approx. 40 g

Approx. 70 g

Approx. 100 g

Materials

Case: Aluminum; Cover, side parts, and lens: PC; Cable: Heat resistant polyvinyl chloride;
 Connector: Thermoplastic resin with glass

LED safety

Risk Group 2 (IEC 62471)

Accessories

Instruction sheet

The color of white LEDs can vary due to intrinsic characteristics.
 Confirm suitability for the application in advance. 

Direct Ring Light FL-DR Series

Model

Wide Area
 Model

High-
 brightness
 Model

Wide Area
 Model

High-
 brightness
 Model

Wide Area
 Model

High-
 brightness
 Model

FL-DR32W

FL-DR32W-H

FL-DR50W

FL-DR50W-H

FL-DR90W

FL-DR90W-H

Light source

White LEDs

Vibration resistance

10 to 150 Hz (Double amplitude: 0.7 mm), 80 min each in X, Y, and Z directions

Shock resistance

150 m/s2 3 times each in 6 directions

Ambient temperature

Operating: 0 to 40°C, Storage: -15 to 60°C (with no icing or condensation)

Ambient humidity

Operating/storage: 35% to 85% (with no condensation)

Ambient atmosphere

No corrosive gases.

Degree of protection

IEC60259 IP20

Weight

Approx. 25 g

Approx. 30 g

Approx. 70 g

Approx. 80 g

Materials

Case and Lens: PC, Cable: Heat resistant polyvinyl chloride,
 Connector: Thermoplastic resin with glass

LED safety

Risk Group 2 (IEC 62471)

Accessories

Instruction sheet

The color of white LEDs can vary due to intrinsic characteristics.
 Confirm suitability for the application in advance. 

Camera-mount Lighting Controller for FL Series FL-TCC Series

Lighting Controller

Product type

Lighting Controller

Model

FL-TCC1

Input voltage

Supplied from applicable camera.

Applicable camera

FH-S/SC/S02/SC02/S04/SC04, FZ-S/SC/S2M/SC2M/S5M2/SC5M2/SH/SHC/SF/SFC/
 SP/SPC, FQ-MS series and others.

Applicable controller

FH series

Power consumption

10 W, 0.9 A max. (including the lighting section)

Number of output channels

1

Applicable light

FL-[] series

Luminance
 control
 method

Functions

PWM frequency: 100 kHz, Light adjustment: 255 levels (set with the Controller)

Trigger lighting

Lighting ON synchronized with trigger input timing from the Controller.
 (Auto setting in accordance with the shutter speed.)

Trigger lighting
 delay time

Ton: 30 μs max. (Trigger ready μs)
 Toff: 10 μs max.

External interface

Dedicated communication connector

Ambient temperature

Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation)

Ambient humidity

Operating/storage: 35% to 85% (with no condensation)

Vibration resistance

10 to 55 Hz, (0.7 mm double amplitude) 80 min each in X, Y, and Z directions

Shock resistance

150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward)

Materials

Case: SECC, Cable: PVC

Degree of protection

IP20 (IEC60529)

Weight

Approx. 110 g

Accessories

Instruction sheet, Insulation sheet, Mounting screw (M2 ✕ 6 mm) ✕ 4

Applicable standards

EN61326-1 *, KC

* Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)
    Also, the following condition is applied to the immunity test of this product.
    There are case that Lighting brightness fluctuate Max 10%.

Digital Lighting Controller for FL series FL-STC Series

Product type

One-channel models

Two-channel models

I/O type

NPN

PNP

NPN

PNP

Model

FL-STC10

FL-STC15

FL-STC20

FL-STC25

Power supply voltage

24 VDC±10% (including ripple)

Power consumption

36 W, 1.5 A max. (including the lighting
 section)

72 W, 3 A max. (including the lighting
 section)

Number of output channels

1

2

Applicable light

FL-[] Series

Luminance
 control
 method

CONTINUOUS
 mode

While the Strobe Controller power source is ON, light is continuously emitted.
 PWM frequency: 100 kHz, Light adjustment: 400 levels

EXTERNAL
 TRIGGER mode

Lighting in synchronization with an external trigger input.
 Lighting duration: Continuous while the trigger is input, or 0.1 to 99.9 ms (set in 0.1-ms
 increments)
 PWM frequency: 100 kHz, Light adjustment: 400 levels

STOROBE
 mode

Lighting in synchronization with the external trigger input, but twice brighter than
 EXTERNAL TRIGGER mode.
 Lighting pulse width: 0.01 to 5 ms (light adjustment: 500 levels equivalent)

Luminance
 adjustment

Key

Luminance control method and adjustment value: Slide switch and cross key setting

I/O

Luminance adjustment value: 9-bit binary input control

External interface

Parallel I/O connector (D-sub 15-pin), Terminal block (external trigger input with 2
 terminals, power source voltage input with 2 terminals)

Ambient temperature

Operating: 0 to 40°C, Storage: -15 to 60°C (with no icing or condensation)

Ambient humidity

Operating/storage: 35% to 85% (with no condensation)

Vibration resistance

10 to 150 Hz (0.7 mm double amplitude), 80 min each in X, Y, and Z directions

Shock resistance

150 m/s2 3 times each in 6 direction (up/down, left/right, forward/backward)

Materials

Case: PC

Degree of protection

IEC60529 IP20

Weight

Approx. 100 g

Accessories

Instruction sheet,Terminal block connector

Applicable standards

EN61326-1 *, KC

* Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)
    Also, the following condition is applied to the immunity test of this product.
    There are case that Lighting brightness fluctuate Max 10%.

Lighting Controller for Photometric Stereo Lights FL-TCC1PS Series

Model

FL-TCC1PS

Applicable vision
 system controller

FH series (Ver.6.00 or higher)

Applicable camera

FH-S series, FZ-S series

Applicable light

FL-PS series

Number of channels

1

Power supply voltage *

24 VDC±10% (including ripple)

Recommended
 power supply

S8VK-G12024 (manufactured by OMRON, 24 VDC, 5 A 120 W)

Current consumption

3.0 A max.

Drive method

Constant voltage method

Luminance control method

Duty light adjustment: light adjustment of 255 levels (configured with vision system
 controller)

Trigger lighting

Lighting in synchronization with trigger input timing from the controller (configured with
 vision system controller).

Lighting duration setting

Auto setting in accordance with shutter speed.

Lighting time control

Set with vision system controller or set in accordance with shutter speed.

External interface

Camera connection cable (directly connected with the main unit) 400 mm
 Lighting connection cable (directly connected with the main unit) 400 mm

Ambient temperature

Operating: 0 to 40°C Storage: -15 to +60°C (with no icing nor no condensation)

Ambient humidity

Operating and storage: 35% to 85% (with no condensation)

Degree of protection

IP20 (IEC60529)

Vibration resistance

10 to 150 Hz, (0.35mm half-amplitude) 80 min. each in X, Y, and Z directions

Shock resistance

150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward)

Material

Case: Alminum, Cable: PVC, Camera Mount Plate: POM

Weight

Approx. 200 g

Accessories

Instruction Sheet (this Sheet), 24 V power supply terminal block (male), camera mount
 plate, Compliance Sheet, mounting screws (M2 set screw x 4, M2 flat head screw x 4, M4
 flat head screw x 4)

Note:
 1. When supplying the power to this lighting controller, make sure to turn ON the power to this lighting controller first or at the same time with the vision system controller.
 2. When FL-PS260W is used in the length of the power supply line at least 15m, adjust the power voltage to become 24-26.4 V.
 3. This lighting complied with the EN standard (EN61326-1)
 (Electromagnetic environment : Industrial electromagnetic environment (EN/IEC 61326-1 Table 2))
 Also, the following condition is applied to the immunity test of this product.
 There are case that Lighting brightness fluctuate Max 10%.
 4. This light complies with the KC standard.