Smart Sensors High-Precision Contact Type
ZX-T
The Smart Answer to High-precision Measuring Applications that Were Difficult with Non-contact Types
Sensors
Sensor Heads
|
Size |
Type |
Sensing distance |
Resolution * |
Model |
|
6 dia. |
Short type |
1 mm |
0.1 μm |
ZX-TDS01T |
|
Standard type |
4 mm |
ZX-TDS04T |
||
|
Low measurement type |
ZX-TDS04T-L |
|||
|
8 dia. |
Standard type |
10 mm |
0.4 μm |
ZX-TDS10T |
|
Ultra-low-load Type |
ZX-TDS10T-L |
|||
|
Air Lift Type |
ZX-TDS10T-V |
|||
|
Air Lift/Air Push Type |
ZX-TDS10T-VL |
Note: The resolution refers to the minimum value that can be read when a ZX-TDA[]1 Amplifier Unit is connected.
Amplifier Units
|
Appearance |
Power supply |
Output type |
Model |
|
|
DC |
NPN |
ZX-TDA11 2M |
|
PNP |
ZX-TDA41 2M |
Accessories (Order Separately)
Calculating Unit
|
Appearance |
Model |
|
|
ZX-CAL2 |
ZX-series Communications Interface Unit
|
Appearance |
Model |
|
|
ZX-SF11 |
SmartMonitor Sensor Setup Tool for Personal Computer Connection
|
Appearance |
Output type |
Model |
|
|
ZX-series Communications Interface Unit |
ZX-SF11 |
|
|
ZX-series Communications Interface Unit + ZX-series Sensor |
ZX-SFW11EV3 *1 *2 |
|
CD-ROM |
ZX-series Sensor Setup Software |
ZX-SW11EV3 *1 |
1. When using the ZX-TDA11/41 with the SmartMonitor, either the ZX-SFW11EV3 or the ZX-SW11EV3 SmartMonitor must be used. Earlier versions cannot be used.
2. The ZX-SFW11EV3 SmartMonitor can be used only to set functions and monitor waveforms.
Cables with Connectors on Both Ends (for Extension)*
|
Cable length |
Model |
Quantity |
|
1 m |
ZX-XC1A |
1 |
|
4 m |
ZX-XC4A |
|
|
8 m |
ZX-XC8A |
* Robot Cable models are also available. The model numbers are ZX-XC[]R.
Preamplifier Mounting Brackets
|
Appearance |
Model |
Remarks |
|
|
ZX-XBT1 |
Attached to each Sensor Head |
|
|
ZX-XBT2 |
For DIN track mounting |
