High-temperature Basic Switch
TZ
Stable Operation at an Ambient Temperature of 400°C
Ratings
|
Rated voltage |
Non-inductive load (A) |
Inductive load (A) |
||||||
|
Resistive load |
Lamp load |
Inductive load |
Motor load |
|||||
|
NC |
NO |
NC |
NO |
NC |
NO |
NC |
NO |
|
|
125 VAC |
1 |
0.9 |
0.45 |
1 |
1.5 |
0.75 |
||
|
8 VDC |
1 |
0.9 |
0.45 |
1 |
1.5 |
1.5 |
||
Note: 1. The above current ratings are the values of the steady-state current.
2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
5. The above ratings are tested under the following conditions.
Ambient temperature: 20±2°C
Ambient humidity: 65±5%RH
Switching frequency: 20 times/min
Characteristics
|
Operating speed |
0.05 mm to 1 m/s * 1 |
|
|
Operating frequency |
Mechanical |
60 operations/min |
|
Electrical |
20 operations/min |
|
|
Insulation resistance |
100 MΩ min. (at 500 VDC) |
|
|
Contact resistance |
100 mΩ max. (initial value) |
|
|
Dielectric strength |
1,000 VAC, 50/60 Hz for 1 min between terminals of same polarity |
|
|
Vibration resistance |
Malfunction |
10 to 55 Hz, 1.5-mm double amplitude * 2 |
|
Shock resistance |
Destruction |
500 m/s2 max. |
|
Malfunction |
300 m/s2 max. * 1 * 2 |
|
|
Durability |
Mechanical |
100,000 operations min. |
|
Electrical |
50,000 operations min. |
|
|
Degree of protection |
IP00 |
|
|
Electric shock protection |
Class I |
|
|
Ambient operating temperature |
-65 ° C to 400 ° C (with no icing) |
|
|
Ambient operating humidity |
35% to 85%RH |
|
|
Weight |
Approx. 45 to 54 g |
|
1. This operating speed applies to switches with pin-type pushbuttons.
2. This refers to a malfunction period of 1 ms max.
Contact Specifications
|
Contact |
Specification |
Rivet |
|
Material |
Platinum alloy |
|
|
Gap (standard value) |
0.5 mm |
|
|
Inrush current |
NC |
9 A max. |
|
NO |
4.5 A max. |