Terminal			Solder terminal (-1A)	Screw terminal (-B)
Actuator			Model	Model
Pin plunger			DZ-10G-1A	DZ-10G-1B
Hinge lever		High OT	DZ-10GW-1A	DZ-10GW-1B
		Low OT	DZ-10GV-1A	DZ-10GV-1B
Short hinge roller lever		High OT	DZ-10GW22-1A	DZ-10GW22-1B
		Low OT	DZ-10GV22-1A	DZ-10GV22-1B
Hinge roller lever		High OT	DZ-10GW2-1A	DZ-10GW2-1B
		Low OT	DZ-10GV2-1A	DZ-10GV2-1B

Accessories (Order Separately)

Terminal Covers (Sold Separately)

The Terminal Covers can be attached to Z, A, X, and DZ Switches.
 The Terminal Cover is secured with mounting screws and protects the casing and terminal wires from dust, vibration, or fingers, thus preventing terminal short-circuiting, ground faults, wire disconnection or improper connection, and electric shock accidents.
 Terminal Covers made of phenol resin have five or six thin wall sections. These sections can be torn open for providing holes for lead cables at desired points.
 A terminal cover can’t be used in the case of using an actuator sold separately. 

Application		Soldering   terminal use	Screw  terminal use	Remarks
Material	Mounting direction	Model
Phenol resin	Side mounting	AP-A	AP-B	---
Metal press mold	Side mounting	AP1-A	AP1-B	Used for AP-A and AP-B
Vinyl chloride	Side mounting	AP-Z		---

Note: Use a Terminal Cover for screw terminals fir DZ-series Switches with soldering terminals. 

Separator (Sold Separately)

Use a Separator when it is difficult to provide a sufficient insulation distance or when using the Switch near metal parts or copper wires. 

Model

SEPARATOR FOR Z

Actuators (Sold Separately)

A Switch can be actuated by a cam or an appropriate object, in which case, use one of the following Actuators according to the application. 

Actuator			Common to Z and X models
Hinge lever			XAA-1
Hinge roller lever			ZAA-2
Panel mount plunger		Short	ZAQ-3
		Medium	ZAQ-2
		Long	ZAQ-1
Panel mount roller plunger			ZAQ-22