Safety Limit Switch
D4B-[]N
Robust safety limit switch with metal housing Slow-action and snap-action contact with certified direct opening operation certification.
Standards and EC Directives
Conforms to the following EC Directives:
• Machinery Directive
• Low Voltage Directive
• EN50041
• EN60204-1
• EN ISO 14119
Certified Standards
Snap-action Models
|
Certification body |
Standard |
File No. |
|
TÜV Rheinland |
EN60947-5-1 (certified direct opening mechanism) |
Consult your OMRON |
|
EN60947-5-1 (uncertified direct opening mechanism) |
J50005477 * |
|
|
UL |
UL508 |
E76675 |
|
CSA |
C22.2 No. 14 |
LR45746 |
|
CQC (CCC) |
GB/T14048.5 |
Contact your OMRON |
* Adjustable roller lever, adjustable rod lever only.
Slow-action Mode
|
Certification body |
Standard |
File No. |
|
TÜV Rheinland |
EN60947-5-1 (certified direct opening mechanism) |
Consult your OMRON |
|
EN60947-5-1 (uncertified direct opening mechanism) |
J50005477 * |
|
|
UL |
UL508 |
E76675 |
|
CSA |
C22.2 No. 14 |
LR45746 |
|
CQC (CCC) |
GB/T14048.5 |
Contact your OMRON |
* Adjustable roller lever, adjustable rod lever only.
Certified Standard Ratings
TÜV (EN60947-5-1), CCC (GB/T14048.5)
|
Utilization category |
AC-15 |
|
Rated operating current (Ie) |
2 A |
|
Rated operating voltage (Ue) |
400 V |
Note: As protection against short-circuiting, use either a gI-type or gG-type 10 A fuse that conforms to IEC60269.
UL/CSA: (UL508, CSA C22.2 No. 14)
A600
|
Rated voltage |
Carry current |
Current (A) |
Volt-amperes (VA) |
||
|
Make |
Break |
Make |
Break |
||
|
120 VAC |
10 A |
60 |
6 |
7,200 |
720 |
Ratings
|
Rated voltage (V) |
Non-inductive load (A) |
Inductive load (A) |
||||||
|
Resistive load |
Lamp load |
Inductive load |
Motor load |
|||||
|
NC |
NO |
NC |
NO |
NC |
NO |
NC |
NO |
|
|
125 VAC |
10 |
3 |
1.5 |
10 |
5 |
2.5 |
||
|
8 VDC |
10 |
6 |
3 |
10 |
6 |
|||
Note: 1. The above values are continuous currents.
2. Inductive loads have a power factor of 0.4 or higher (AC) or a time constant of 7 ms or lower (DC).
3. Lamp loads have a inrush current of 10 times the normal current.
4. Motor loads have a inrush current of 6 times the normal current.
|
Inrush current |
30 A max. |
Characteristics
|
Degree of protection *1 |
IP67 (EN60947-5-1) |
|
|
Durability *2 |
Mechanical |
30,000,000 operations min. (snap-action) |
|
Electrical |
500,000 operations min. (10 A resistive load at 250 VAC) |
|
|
Operating speed |
1 mm/s to 0.5 m/s |
|
|
Operating frequency |
Mechanical |
120 operations/minute |
|
Electrical |
30 operations/minute |
|
|
Contact resistance |
25 mΩ max. |
|
|
Minimum applicable load *3 |
180 mA resistive load at 5 VAC |
|
|
Rated insulation voltage (Ui) |
600 V (EN60947-5-1) |
|
|
Rated frequency |
50/60 Hz |
|
|
Protection against electric shock |
Class I (with ground terminal) |
|
|
Pollution degree (operating environment) |
3 (EN60947-5-1) |
|
|
Impulse withstand voltage |
Between terminals |
2.5 kV (snap-action)/4 kV (slow-action) |
|
Between terminals |
4 kV (slow-action) |
|
|
Between each |
4 kV |
|
|
Insulation resistance |
100 MΩ min. (at 500 VDC) between terminals of the same polarity |
|
|
Contact gap |
2 × 2 mm min. (slow-action) |
|
|
Vibration resistance |
Malfunction |
10 to 55 Hz, 0.75 mm single amplitude |
|
Shock resistance |
Destruction |
1,000 m/s2 min. |
|
Malfunction |
300 m/s2 min. |
|
|
Conditional short-circuit current |
100 A (EN60947-5-1) |
|
|
Conventional enclosed thermal current (Ithe) |
20 A (EN60947-5-1) |
|
|
Ambient operating temperature |
-40 to 80°C (with no icing) |
|
|
Ambient operating humidity |
95% max. |
|
|
Weight |
Approx. 250 g |
|
Note: 1. The above values are initial values.
2. The above values may vary depending on the model. Consult your OMRON sales representative for details.
1. The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing properties are sufficient for the operating conditions and environment beforehand.
2. The durability is for an ambient temperature of 5 to 35°C and ambient humidity of 40% to 70%. For further conditions, consult your OMRON sales representative.
3. The above values may vary depending on switching frequency, environmental condition, and relativity level, consult your OMRON sales representative.