System products

Endress+Hauser System products is one of the world’s leading providers of measuring instruments and complete systems for System products.

Products List

Commubox FXA195 USB/HART modem

World’s only intrinsically safe HART/USB interface for Device & FieldCare and FieldXpert software

Predecessor: Commubox FXA191

  • Input: USB signal as per USB specification.
  • Output: Connects HART field devices with the USB interface of a laptop

 

Product picture surge arrester HAW562 HAW562 Surge arrester

Surge arrester for DIN rail according to IEC 60715

HAW569 Surge arresters

Surge arresters for field mounting

EngyCal RH33 BTU meter

Custody transfer BTU meter for recording heat quantities of water

  • Input: 1x Puls/Analog
    2x RTD/Analog
    Loop power supply 24V DC (+/-16%)
  • Output: 1x 4…20mA
    2x digital (Open Collector)
  • Display: 160 x 80 Dot-Matrix LCD with white backlit
    colour change in case of alarm event
    active display area 70 x 34 mm
  • Calculations: heat quantity and heat quantity difference

 

RIA15 Loop-powered indicator for 4 to 20 mA or HART signals

For the indication of the 4 to 20 mA signal or the HART® values in the field or in the panel!

Predecessor: Process indicator RIA251, Field indicator RIA261, VU2550, VU2551
Hide details

  • Input: 1 x analogue 4…20 mA/HART®
  • Output: Not defined
  • Display: LCD 17 mm (0.67″)
    5-digit
    7-segment bargraph
    Plain text display for unit/TAG
    Activatable backlight
  • Power Supply: Loop powered

 

RMA42 Process transmitter with control unit

Universal transmitter, loop power supply, barrier and limit switch in one device!

Predecessor: Process transmitter RMA421, Process transmitter RMA422, XTN170

  • Input: 2 x universal (current, voltage, R, RTD, TC, resistance)
  • Output: 2 x Analog (current, voltage)
  • Output: 2 x Analog (current, voltage)
  • Display: LCD
    7 segment
    Multicolour
    Bargraph
    TAG unit
    Colour change in case of failure
  • Power Supply: Not defined

 

RN22 active barrier, power supply, analog signal doubler

Intrinsically safe 24 VDC compact interface module for use in hazardous areas, SIL systems

Predecessor: Transmitter Supply RN221N

  • Input: 0/4…20 mA / HART
    feeding/not feeding
  • Output: 0/4…20 mA / HART
    active/passive
  • Power Supply: 24 V DC

 

RNB22 system power supply unit

Safely power system interfaces on the DIN rail bus

Predecessor: System power supply RNB130

  • Output: 24…28 V DC
  • Power Supply: 100…240 V AC/DC

 

Field Xpert SMT50

Universal, high-performance tablet PC for device configuration

  • InputL: 2 MP camera on the front, 5 MP camera or better, on the rear

 

Field Xpert SMT70

Universal, high-performance tablet PC for device configuration

Predecessor: Field Xpert SFX370, Field Xpert SFX350

  • Input: Camera:

• 5 MP camera on the back with auto focus and LED flash with 1500 mcd
• 2 MP camera on the front
Scanner:
• 1D/2D barcode scanner

 

RIA46 Field meter with control unit

Multifunctional field meter for monitoring and indication of analog measured values

  • Input: 2 x universal (U, I, R, RTD, TC)
  • Output: 2 x analogue output (I, U) 1 x loop power supply
  • Output: 2 x analogue output (I, U)
    1 x loop power supply
    Display
  • Multicolor backlight LCD
    White/black/yellow
    Bargraph
    Unit
    TAG
    Alarm warning in plain text
  • Power Supply: 20…250V AC/DC

 

RLN22 isolating amplifier

Safe and reliable switching operations in critical systems

  • Input: NAMUR
    blocking: < 1,2 mA
    conducting: > 2,1 mA
  • Output: relay contact
  • Power Supply: 24 V DC

 

RN42 active barrier, wide range power supply

1-channel wide range supply and active barrier for safe isolation of 4 to 20 mA standard signal circuits

Predecessor: Transmitter Supply RN221N

  • Input: 0/4…20 mA / HART
    feeding/not feeding
  • Output: 0/4…20 mA / HART
    active/passive
  • Power Supply: 24…230 V AC/DC

 

Memograph M RSG45 Advanced Data Manager

Saves, visualizes, analyzes and communicates

Predecessor: Memograph M RSG40, Application manager RMM621, Memograph RSG10, Memograph S RSG12, TL, TN, TP, ML, M3, MT, MULCNT, PRIEVT, MULEVT, TL

  • Input: 0…20 universal
    HART
    6…14 digital
  • Output: 2 analog
  • Display: 7“ TFT
  • Storage/Recording: internal memory
    SD card
    USB flash drive
  • Calculations: Mass/heat quantity heat quantity difference

 

Bunker Metering Computer SBC600

Providing accuracy and efficiency in bunkering

FieldPort SWA50

Intelligent Bluetooth® and/or WirelessHART adapter for all HART field devices

  • Output

WirelessHART and/or Bluetooth® communication interface,
Operating frequency: 2.4 GHz (ISM band),
Transmission range under reference conditions:
WirelessHART communication – up to 200 m (656 ft),
Bluetooth communication – up to 40 m (131 ft)

 

WirelessHART Adapter SWA70

Smart WirelessHART interface module with power supply for field devices

  • Output: WirelessHART communication interface
    Transmission rate: Nominal 250 kBits/s
    Operating frequency: 2.4 GHz (ISM band)
    Transmission range under reference conditions:
    Outdoor 250 m, indoor 50 m
  • Display: Integral via 3 LEDs

 

FieldGate SWG50

Functional WirelessHART gateway

WirelessHART Fieldgate SWG70

Intelligent WirelessHART gateway with Ethernet and RS-485 interfaces

  • Output: Ethernet (10 BASE-T/10 BASE TX)
    – Configurable for HART IP and MODBUS TCP communication
    RS-485 serial interface
    – Configurable for HART Version 7.0 or MODBUS RTU communication
    EtherNet/IP interface
  • Display: Integral via 5 LEDs

 

Fieldgate SFG500 Intelligent Ethernet/PROFIBUS gateway

Parallel access to PROFIBUS networks, monitoring of PROFIBUS and HART device status

Predecessor: Fieldgate FXA720

RB223 Loop powered passive barrier

One or two-channel barrier for the safe separation of 4…20 mA standard signal circuits

Predecessor: TCM141

  • Input: 2 x analog 4…20 mA
  • Output: 2 x analog 4…20 mA

 

RIA14 Loop-powered field indicator

Excellent readable indication of a 4…20 mA signal on-site for a better process overview!

Predecessor: Field indicator RIA141

  • Input: 1 x analogue 4…20 mA
  • Output: 1 x open collector
  • Output: 1 x open collector
  • Display: LCD 20 mm (0.79″)
    5-digit
    Bargraph
    Plain text display
  • Power Supply: Loop powered

 

RIA16 Loop-powered indicator

Excellently readable indication of 4…20 mA signal with trend bar graph for a better process overview

Predecessor: Field indicator RIA261

  • Input: 1 x analogue 4…20 mA
  • Output: 1 x open collector
  • Output: 1 x open collector
  • Display: LCD 26 mm (1.02″)
    5-digit
    Bargraph
    Plain text display
  • Power Supply: Loop powered

 

RIA45 Process meter with control unit

Multifunctional panel mounted process meter for monitoring and indication of analog measured values

Predecessor: Process indicator RIA250, TMT2153, TMT2174, TMT2175, TMT2173, TMT2155, VU2650, VU2653

  • Input: 2 x universal (U, I, R, RTD, TC)
  • Output: 1 x loop power supply
  • Output: 2 x analogue output (I, U)
    1 x loop power supply
  • Display: Multicolor backlight LCD
    White/black/yellow
    Bargraph
    Unit
    TAG
    Alarm warning in plain text
  • Power Supply: 20…250V AC/DC

 

RIA452 Process indicator with pump control

Digital process meter in panel mounted housing for monitoring and displaying analog measured values

Predecessor: Process display RIA450, XT150, XT450

  • Input: 1 x analog (U, I, RTD, TC, R)
  • Output: 1 x analog (U, I)
    1 x transmitter power supply
  • Output: 1 x analog (U, I)
    1 x transmitter power supply
  • Display: LCD multicolour
    Illuminated
    Bargraph
  • Power Supply: 90…250 V AC, 20…28 V AC, 20…36 V DC

 

RLN42 NAMUR isolating amplifier

Two-channel NAMUR isolating amplifier for the transmission of binary switch signals

  • Input: NAMUR
    blocking: < 1,2 mA
    conducting: > 2,1 mA
  • Output: relay contact
  • Power Supply: 20…250 V AC/DC

 

RNO22 output amplifier

Safe and reliable control of active components

  • Input: 0/4…20 mA / HART
    passive
  • Output: 0/4…20 mA / HART
    active
  • Power Supply: 24 V DC

 

EngyCal RS33 Steam calculator

Steam calculator for recording steam mass and energy flow for saturated or superheated steam

  • Input: 1x Puls/Analog for flow
    2x RTD/Analog for temperature and pressure
    Loop power supply 24V DC (+/-16%)
  • Output: 1x 4…20mA
    2x digital (Open Collector)
  • Display: 160 x 80 Dot-Matrix LCD with white backlit
    colour change in case of alarm event
    active display area 70 x 34 mm
  • Calculations: IAPWS-IF97

 

iTHERM TrustSens self-calibration Monitoring

Automated temperature measurement solution – 100% compliance, 0% effort

Reliable & easy:

  • Cost reduction by saving calibration costs and reducing calibration cycles

All required components in one bundle, nothing is forgotten

  • 100% compliance and audit-proof documentation:
  • Fully traceable calibration with automated documentation
  • Tamper-proof data storage according to FDA 21 CFR Part 11
  • Predictive maintenance
  • Calibration with timestamp

Risk reduction and elimination of undetected failures:

  • Higher process transparency
  • Higher product safety

RA33 Batch Controller

Recording and controlling of batch operations

  • Input: 1 x analogue (I) / pulse (for flow)
    1 x RTD (for temperature)
    1 x analogue (I) (for density)
    Loop power supply 24V DC (+/-16%)
  • Output: 1 x analogue (I) / pulse (active)
    2 x open collector
  • Display: 160 x 80 Dot-Matrix LCD with white backlit
    Colour change in case of alarm event
    Active display area 70 x 34 mm
  • Calculations: Volume calculation

 

RID14 8 channel field indicator for fieldbuses

Indication of up to 8 process or calculated values for FOUNDATION Fieldbus™ or PROFIBUS® PA protocol

Predecessor: PROFIBUS-PA indicator RID261

  • Input: Foundation Fieldbus protocol
    PROFIBUS PA protocol
  • Output: Not defined
  • Display: High contrast backlit LCD with bargraph
    TAG/unit
  • Power Supply: Not defined

 

RID16 8 channel field indicator for fieldbuses

Indication of up to 8 process or calculated values for FOUNDATION Fieldbus™ or PROFIBUS® PA protocol

Predecessor: PROFIBUS-PA indicator RID261

  • Input: Foundation Fieldbus protocol
    PROFIBUS PA protocol
  • Output: Not defined
  • Display: High contrast backlit LCD with bargraph
    TAG/unit
  • Power Supply: Not defined

 

RNF22 power feed-in and error message module

Safely power and monitor system interfaces on the DIN rail bus

  • Input: 24 V DC
  • Output: Uin – 0,8 V
  • Power Supply: 24 V DC

 

Ecograph T RSG35 Universal Graphic Data Manager

Paperless recording, visualization and monitoring of the process values at the same time

Predecessor: Chromalog SP CHROSP, RD10, RD10S, Alphalog RSA10, Ecograph RSG20, Ecograph A RSG22, Ecograph C RSG24, Ecograph T RSG30, Chroma-Log SL RSL, Chromalog T RSL30, PRILOG, MULLOG, CHROML, CHROMP, MULVAR

  • Input
  • 12 analog (max) (U, I, TC, RTD, frequency, pulse)
    6 digital (max)
  • Output: 6 relays (max)
    1 transmitter power supply
  • Display: TFT 5.7″ colour graphic display
  • Power supply: 100…230 V AC +/-10%
    24V (-10%, +15%) AC/DC
  • Storage/Recording: Internal memory
    SD card
    USB flash drive
  • Storage/Recording: internal memory, SD card, USB flash drive

 

Gateway for measurement values Fieldgate FXA42

Communication of measurement values of connected 4 to 20mA analog as well as digital field devices

Predecessor: Fieldgate FXA520, Fieldgate FXA320, FXZ520, FXA360, FXA560

  • Input: 4x 4…20 mA analog
    4x digital
    Pulse counter
    Modbus TCP
    Modbus RS485
  • Output: 4x digital, Modbus TCP , Modbus RS485

 

Tank gauging Tank Side Monitor NRF81

Field gateway for tank sensor operation, monitoring and integration into inventory control system

Predecessor: Tank Side Monitor NRF590

Tankvision Inventory management Gauge Link NXA20

Acquires data from non Endress+Hauser field instruments and converts it to Modbus

  • Input: Enraf BPM; Saab TRL/2
  • Output: Modbus RS485

 

Tankvision Inventory management Tank Scanner NXA820

Acquires data from field instruments

Predecessor: NRM571, NRS57, Tankvision Field Link NXA30, NXS310, NR30

  • Input: Modbus RS485; V1; WM550
  • Output: Ethernet; OPC DA Server (installed on a separate PC)

 

Tankvision Inventory management Data Concentrator NXA821

Consolidates data from connected Tank Scanners NXA820

Predecessor: NRM571, NRS57, NXS310

  • Input: Connection to NXA820
  • Output: Ethernet; Serial Printer port according to PTB

 

Tankvision Inventory management Host Link NXA822

Communicates data to other system (Modbus)

Predecessor: NRM571, NRS57, NXS310

  • Input: Connection to NXA820
  • Output: Ethernet; Modbus Ethernet; Modbus RS485

 

Tankvision Multi Scan NXA83B

Gateway component for Tank Gauging systems

Predecessor: Tankvision Multi Scan NXA83

  • Input: 3 versions:
    4 Channel; 12 Channel; 20 Channel
    With following possible protocols:
    Modbus RS485; V1; WM550;
    Tokyo Keiso FW9000; Varec
    Mark/Space; Saab TRL/2; Enraf
    BPM; Scientific Instruments;
    Modbus Ethernet
  • Output: OPC DA; Modbus RS485; Modbus Ethernet

 

Tankvision LMS NXA86B

LNG Tank Gauging system

Predecessor: NXA86

RN221N Active barrier with optional HART® diagnosis

Active barrier with power supply for safe separation of 4…20 mA current circuits

Predecessor: RN221, NY9170, HAA420Z

Successor: Active Barrier 24V DC RN22, Active Barrier 24-230V AC/DC RN42

  • Input: 1 x analog 4…20 mA
  • Output: 1 x analog 4…20 mA

 

FieldPort SFP20

USB modem for the configuration of IO-Link devices

Field Xpert SMT77

Universal, high-performance tablet PC for device configuration in Ex Zone 1 areas

Predecessor: Field Xpert SFX370

Overfill Prevention System SOP300

For reliable and secure tank overfill prevention