Digital Pressure Sensor
E8F2
Pressure Sensor with Easy-to-Read LED Display
Sensor
|
Model |
NPN output |
E8F2-A01C |
E8F2-B10C |
E8F2-AN0C |
|
PNP output |
E8F2-A01B |
E8F2-B10B |
E8F2-AN0B |
|
|
Power supply voltage |
12 to 24 VDC±10% with a ripple (p-p) of 10% max. |
|||
|
Current consumption |
70 mA max. * 1 |
|||
|
Pressure type |
Gauge pressure |
|||
|
Rated pressure range |
0 to 100 kPa |
0 to 1 MPa |
0 to -101 kPa |
|
|
Pressure setting range |
0 to 100 kPa |
0 to 1 MPa |
0 to -101 kPa |
|
|
Withstand pressure |
400 kPa |
1.5 MPa |
400 kPa |
|
|
Applicable fluid |
Non-corrosive gas and non-flammable gas |
|||
|
Operating mode |
Hysteresis mode, window mode, and automatic teaching mode |
|||
|
Repeat accuracy |
±1%FS max. |
|||
|
Linearity (linear output) |
±1%FS max. |
|||
|
Response time |
5 ms max. |
|||
|
Linear output |
1 to 5 V ±5% F.S. with an output impedance of 1 kΩ and a permissible resistive load of 500 kΩ. |
|||
|
ON/OFF outputs |
NO or NC open collector (depending on whether the output configuration is NPN or PNP) |
|||
|
ON/OFF |
Load current |
30 mA max. |
||
|
Output applied voltage |
30 VDC max. |
|||
|
Residual voltage |
NPN open collector output: 1 V max. with 30 mA load current |
|||
|
Display * 2 |
3.5-digit red LED |
|||
|
Display accuracy |
±3%FS±1 digit max. |
|||
|
Protection circuits |
Reverse polarity protection, load short-circuit protection |
|||
|
Ambient temperature range |
Operating: 0 to 55°C |
|||
|
Ambient humidity range |
Operating/Storage: 35% to 85% (with no condensation) |
|||
|
Temperature influence |
±3%FS max. |
|||
|
Voltage influence |
±1.5%FS max. |
|||
|
Insulation resistance |
100 MΩ min. (at 500 VDC) between current-carrying parts and case |
|||
|
Dielectric strength |
1,000 VAC at 1 min |
|||
|
Vibration resistance |
Destruction: 10 to 500 Hz, 1.0-mm double amplitude or 150 m/s2, three times each for 11 min in the X, Y, and Z directions |
|||
|
Shock resistance |
Destruction: 300 m/s2 3 times each in the X, Y, and Z directions |
|||
|
Degree of protection |
IP50 (IEC) |
|||
|
Pressure port |
R (PT) 1/8 taper screw and M5 female screw |
|||
|
Connection method |
Pre-wired (standard length: 2 m) |
|||
|
Cable |
Approved by UL |
|||
|
Weight (packed state) |
Approx. 110 g |
|||
|
Material |
Pressure port |
Aluminum die-cast |
||
|
Case |
Heat-resistive ABS |
|||
|
Accessories |
Mounting Bracket, Instruction manual |
|||
1. The current consumption is approximately 43 mA in energy-saving mode.
2. Display Example of Digital Indicator
|
Model |
Setting unit |
|
|
kPa |
||
|
Applied pressure |
Digital display |
|
|
E8F2-A01C |
100 |
|
|
E8F2-B10C |
1000 |
|
|
E8F2-AN0C |
-101 |
|
Note: The period ( ) in the display indicates the decimal point.
Its position will not change unless the setting unit is changed.