Note. For information on the following models, refer to the E8FC-25D/25T/25 series data sheet (Catalog No.E608) listed in the Catalog column.
 E8FC-25D/E8FC-25T/E8FC-25 

Sensors

Appearance	Applicable Medium	Control output	Communication  method	IO-Link baud rate	Model
	Liquid	PNP/NPN  selectable	IO-Link Analog	COM2	E8FC-25SD
				COM3	E8FC-25ST

Note: Please contact your OMRON sales representative regarding the IO-Link setup file (IODD file). 

Adapters

It must be selected from the adapters below. 

Appearance	Applicable diameter *		Thread type	Materials	Model
	Nominal  diameter A	Nominal  diameter B
	10 A	3/8”	R (taper thread)	SUS304	E8FC-YA-R10A
			NPT (taper thread)		E8FC-YA-N10A
	15 A	1/2”	R (taper thread)		E8FC-YA-R15A
			NPT (taper thread)		E8FC-YA-N15A
	20 A	3/4”	R (taper thread)		E8FC-YA-R20A
			NPT (taper thread)		E8FC-YA-N20A
	25 A	1”	R (taper thread)		E8FC-YA-R25A
			NPT (taper thread)		E8FC-YA-N25A

* It is recommended that the piping fitting diameters be theme on both the piping side and the sensor mounting side.
    Because the sensor is designed so that the measurement area is in the center of the piping, correct measurement
    may not be possible with different diameter fittings.
    Refer to Piping Method on Catalog for the recommended pipe joint.

Cables (Sensor I/O Connectors)

A Cable is not provided with the Sensor. It must be ordered separately. 

Type	Appearance	Cable	Model
Socket on one  cable end	Straight	2 m	XS5F-D421-D80-F
		5 m	XS5F-D421-G80-F
	L-shaped	2 m	XS5F-D422-D80-F
		5 m	XS5F-D422-G80-F
Socket and plug on  cable ends *	Straight/straight	2 m	XS5W-D421-D81-F
		5 m	XS5W-D421-G81-F
	L-shaped/L-shaped	2 m	XS5W-D422-D81-F
		5 m	XS5W-D422-G81-F

Note: Refer to Sensor I/O Connectors/Sensor Controllers on OMRON website for details.
 * Straight type/L-shape type combinations are also available. 

O-ring (for replacement)

Appearance	Type	Model
	For E8FC-25[][]	E8FC-YL-1