Contact-Type Smart Sensor
E9NC-T
Tough Contact Sensor
Sensor Heads
(Connection Cable between Preamplifier and Amplifier Unit is not provided with the Snesor Head. Be sure to have the Connection Cable ready when using the Sensor.)
|
Type |
Appearance |
Measuring range |
Resolution |
Model |
|
Straight type |
|
5 mm |
0.1 μm |
E9NC-TH5S 2M |
|
Right-angle air type |
|
E9NC-TH5L 2M |
||
|
Flanged type/ |
|
E9NC-TH5SF 2M |
||
|
Flanged type/ |
|
E9NC-TH5LF 2M |
||
|
Straight type |
|
12 mm |
E9NC-TH12S 2M |
|
|
Right-angle air type |
|
E9NC-TH12L 2M |
||
|
Flanged type/ |
|
E9NC-TH12SF 2M |
||
|
Flanged type/ |
|
E9NC-TH12LF 2M |
Amplifier Units
|
Type |
Appearance |
Model |
|
|
Communications* |
|
E9NC-TA0 |
|
|
ON/OFF output |
|
NPN output |
PNP output |
|
E9NC-TA21 2M |
E9NC-TA51 2M |
||
* A Sensor Communications Unit is required if you want to use the Amplifier Unit on a network.
Connection Cable between Preamplifier and Amplifier Unit
|
Cable length |
Model |
Quantity |
|
0.5 m |
E9NC-TXC05 |
1 |
|
5 m |
E9NC-TXC5 |
1 |
|
10 m |
E9NC-TXC10 |
1 |
|
20 m |
E9NC-TXC20 |
1 |
Accessories (Sold Separately)
Sensor Head Accessories
Probe
The E9NC-TB1 is provided with the Sensor Head. Order replacements as required.
|
Type |
Appearance |
Model |
Quantity |
|
3-dia. probe |
|
E9NC-TB1 |
1 |
|
Nylon probe |
|
E9NC-TB2 |
1 |
|
Probe for flat surfaces |
|
E9NC-TB3 |
1 |
Rubber boots
A rubber boot is provided with the Sensor Head. Order replacements as required.
|
Applicable Sensor Head |
Model |
Quantity |
|
E9NC-TH5[] |
E9NC-G5 |
1 |
|
E9NC-TH12[] |
E9NC-G12 |
1 |
Amplifier Unit Accessories
Amplifier Unit Mounting Bracket
A Mounting Bracket is not provided with the Amplifier Unit. It must be ordered separately as required.
|
Appearance |
Model |
Quantity |
|
|
E39-L143 |
1 |
DIN Track
A DIN Track is not provided with the Amplifier Unit. It must be ordered separately as required.
|
Appearance |
Type |
Model |
Quantity |
|
|
Shallow type, total length: 1 m |
PFP-100N |
1 |
|
Shallow type, total length: 0.5 m |
PFP-50N |
1 |
|
|
Deep type, total length: 1 m |
PFP-100N2 |
1 |
End Plate
An End Plate is not provided with the Amplifier Unit. It must be ordered separately as required.
|
Appearance |
Model |
Quantity |
|
|
PFP-M |
1 |
Cover
Attach these Covers to Amplifier Units. Order a Cover when required, e.g., if you lose the covers.
|
Appearance |
Model |
Quantity |
|
|
E39-G22 |
1 |
Related Products
Sensor Communications Units
|
Type |
Appearance |
Model |
|
Sensor Communications |
|
E3NW-ECT |
|
Sensor Communications |
|
E3NW-CCL |
|
Distributed Sensor Unit* |
|
E3NW-DS |
The E9NC-TA0 is supported for firmware version 1.03 or higher (Sensor Communications Units manufactured in July 2014 or later).
*The Distributed Sensor Unit can be connected to any of the Sensor Communications Units.
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
CC-Link is a registered trademark of Mitsubishi Electric Corporation. The trademark is managed by the CC-Link Partner Association.