General-purpose Basic Switch

X

Direct Current Switch with Built-in Magnetic Blowout

Terminal

Solder terminal

 image

Screw terminal

image

Actuator

Model

Model

Pin plunger

image

X-10G

X-10G-B

Slim spring plunger

image

X-10GS

X-10GS-B

Short spring plunger

image

X-10GD

X-10GD-B

Panel mount plunger

image

X-10GQ

X-10GQ-B

Panel mount roller plunger

image

X-10GQ22

X-10GQ22-B

Panel mount cross roller plunger

image

X-10GQ21

X-10GQ21-B

Leaf spring

image

X-10GL

X-10GL-B

Short hinge lever

image

X-10GW21

X-10GW21-B

Hinge lever

image

X-10GW

X-10GW-B

Low-force hinge lever

image

X-10GW4

X-10GW4-B

Short hinge roller lever

image

X-10GW22

X-10GW22-B

Hinge roller lever B

image

X-10GW2

X-10GW2-B

Reverse hinge lever

image

X-10GM

X-10GM-B

Reverse short hinge roller lever *

image

X-10GM22

X-10GM22-B

Reverse hinge roller lever *

image

X-10GM2

X-10GM2-B

* The plungers of reverse-type models are continuously pressed by the compression coil springs and the plungers are
    freed by operating the levers.

Accessories (Order Separately)

Terminal Covers (Sold Separately)

The Terminal Covers can be attached to Z, A, X, and DZ Switches.
 The Terminal Cover is secured with mounting screws and protects the casing and terminal wires from dust, vibration, or fingers, thus preventing terminal short-circuiting, ground faults, wire disconnection or improper connection, and electric shock accidents.
 Terminal Covers made of phenol resin have five or six thin wall sections. These sections can be torn open for providing holes for lead cables at desired points.
 A terminal cover can’t be used in the case of using an actuator sold separately. 

Application

Soldering
 terminal use

Screw
 terminal use

Remarks

Material

Mounting direction

Model

Phenol resin

Side mounting

AP-A

AP-B

---

Metal press mold

Side mounting

AP1-A

AP1-B

Used for AP-A and AP-B

Vinyl chloride

Side mounting

AP-Z

---

Note: Use a Terminal Cover for screw terminals fir DZ-series Switches with soldering terminals. 

Separator (Sold Separately)

Use a Separator when it is difficult to provide a sufficient insulation distance or when using the Switch near metal parts or copper wires. 

Model

SEPARATOR FOR Z

Actuators (Sold Separately)

A Switch can be actuated by a cam or an appropriate object, in which case, use one of the following Actuators according to the application. 

Actuator

Common to Z and X models

Hinge lever

image

XAA-1

Hinge roller lever

image

ZAA-2

Panel mount plunger

image

Short

ZAQ-3

Medium

ZAQ-2

Long

ZAQ-1

Panel mount roller plunger

image

ZAQ-22