Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.)
A16
Separate Construction with Cylindrical 16-dia. Body
Approved Standard Ratings
UL, cUL (File No. E41515)
5 A at 125 VAC, 3 A at 250 VAC (general use)
3 A at 30 VDC (resistive)
Note: Certification has been obtained for the Switch.
For detailed information on individual products that have received certification, consult your supplier.
TÜV (EN60947-5-1) (Low Voltage Directive)
3 A at 250 VAC
3 A at 30 VDC
CCC (GB/T14048.5)
5 A at 125 VAC
3 A at 250 VAC
3 A at 30 VDC
Ratings
Switch Ratings
|
Rated voltage |
Resistive load |
|
125 VAC |
5A |
|
250 VAC |
3A |
|
30 VDC |
3A |
Minimum applicable load: 1 mA at 5 VDC
Rated values are obtained from tests conducted under the following conditions.
1. Load: Resistive load
2. Mounting conditions: No vibration and no shock
3. Temperature: 20 ±2°C
4. Operating frequency: 20 operations/min
Contact Form
|
Name |
Contact |
|
DPDT |
|
Super-bright LED
|
Rated voltage |
Rated current |
Operating voltage |
Internal limiting resistor |
|
5 VDC |
8 mA |
5 VDC ± 5% |
Red, yellow, white : 300 Ω |
|
12 VAC/VDC |
12 VAC/VDC ± 5% |
Red, yellow, white : 1 k Ω |
|
|
24VAC/ VDC |
24 VAC/VDC ± 5% |
2.4 k Ω |
Voltage-reduction Unit (LED Lamp)
|
Rated voltage |
Operating voltage |
Applicable lamp |
|
110 VAC/VDC |
100/110 VAC/VDC (90 to 121 V) |
A16-24DS[] |
|
220 VAC/VDC |
200/220 VAC/VDC (180 to 242 V) |
Characteristics
Socket Unit
|
Item |
Pushbutton Switch |
|
|
Allowable |
Mechanical |
Momentary operation: 120 operations/minute max. |
|
Electrical |
20 operations/minute max. *1 |
|
|
Insulation resistance |
100 MΩ min. (at 500V DC) |
|
|
Contact resistance |
100 mΩ max. (initial value) |
|
|
Dielectric |
Between terminals |
1,000 VAC, 50/60 Hz for 1 minute |
|
Between terminals |
2,000 VAC, 50/60 Hz for 1 minute |
|
|
Between each terminal |
2,000 VAC, 50/60 Hz for 1 minute |
|
|
Between lamp terminals |
1,000 VAC, 50/60 Hz for 1 minute *2 |
|
|
Vibration |
Malfunction |
10 to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms) |
|
Shock |
Destruction |
500 m/s2 max. |
|
Malfunction |
150 m/s2 max. (malfunction within 1 ms) |
|
|
Durability |
Mechanical |
Momentary operation: 2,000,000 operations min. |
|
Electrical |
100,000 operations min. *1 |
|
|
Electric shock protection class |
Class II |
|
|
PTI (tracking characteristic) |
175 |
|
|
Degree of contamination |
3 (IEC947-5-1) |
|
|
Weight |
Approx. 10 g (in the case of a lighted DPDT switch with solder terminals) |
|
|
Degree of protection |
IP40: A16, Oil-resistant IP66: A165 *3 |
|
|
Ambient operating temperature |
-10 °C to 55 °C (with no icing or condensation) |
|
|
Ambient operating humidity |
35% to 85%RH |
|
|
Ambient storage temperature |
-25 °C to 65 °C (with no icing or condensation) |
|
*1. Set and reset constitute one operation.
*2. With LED not mounted.
*3. Degree of protection from the front of the panel.
Screw-less Clamp
|
Item |
Screw-Less Clamp |
||||
|
Recommended wire size |
0.5 mm2 twisted wire or 0.8 mm-dia. solid wire |
||||
|
Usable wires and |
Twisted wire |
0.3 mm2 |
0.5 mm2 |
0.75 mm2 |
1.25 mm2 |
|
Solid wire |
0.5 mm dia. |
0.8 mm dia. |
1.0 mm dia. |
-- |
|
|
Tensile strength |
10 N |
20 N |
30 N |
40 N |
|
|
Length of exposed wire |
10 ±1mm |
||||
|
Compliant standards |
JIS C 2811 Terminal Blocks for Industrial Use |
||||
Operating Characteristics
|
Type |
Pushbutton Switch |
|
|
Characteristics |
IP40 |
Oil-resistant IP66 |
|
Operating force (OF) max. |
4.41 N |
4.91 N |
|
Releasing force (RF) min. |
0.29 N |
|
|
Total travel (TT) |
Approx. 3 mm |
|
|
Pretravel (PT) max. |
2.5 mm |
|
|
Lock travel alternate (LTA) min. * |
0.5 mm |
|
* Alternate operation models only.