Key-type Selector Switch (Detachable) (Cylindrical 16-dia.)
A165K
Separate Construction with Cylindrical 16-dia. Body
Approved Standard Ratings
UL, cUL (File No. E41515)
5 A at 125 VAC, 3 A at 250 VAC (general use)
3 A at 30 VDC (resistive)
Note: Certification has been obtained for the Switch Unit.
For detailed information on individual products that have received certification, consult your supplier.
TÜV (EN60947-5-1) (Low Voltage Directive)
3 A at 250 VAC
3 A at 30 VDC
CCC (GB/T14048.5)
5 A at 125 VAC
3 A at 250 VAC
3 A at 30 VDC
Ratings
Contacts
|
Rated voltage |
Resistive load |
|
125 VAC |
5A |
|
250 VAC |
3A |
|
30 VDC |
3A |
Minimum applicable load: 1 mA at 5 VDC
Rated values are obtained from tests conducted under the following conditions.
1. Load: Resistive load
2. Mounting conditions: No vibration and no shock
3. Temperature: 20±2°C
4. Operating frequency: 20 times/min
Contact Form
|
Name |
Contact form |
|
SPDT |
|
Characteristics
Socket Units
|
Type |
Key-type Selector Switch |
|
|
Allowable |
Mechanical |
20 operations/minute max. |
|
Electrical |
10 operations/minute max. |
|
|
Insulation resistance |
100 MΩ min. (at 500 VDC) |
|
|
Contact resistance |
100 mΩ max. (intial value) |
|
|
Dielectric |
Between terminals of same |
1,000 VAC, 50/60 Hz for 1 minute |
|
Between terminals of different |
2,000 VAC, 50/60 Hz for 1 minute |
|
|
Between each terminal and |
2,000 VAC, 50/60 Hz for 1 minute |
|
|
Vibration |
Malfunction |
10 to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms) |
|
Shock |
Destruction |
500 m/s2 max. |
|
Malfunction |
150 m/s2 max. (malfunction within 1 ms) |
|
|
Durability |
Mechanical |
250,000 operations min. (durability of key: 10,000 operations min.) |
|
Electrical |
100,000 operations min. |
|
|
Electric shock protection class |
Class II |
|
|
PTI (tracking characteristic) |
175 |
|
|
Degree of contamination |
3 (IEC60947-5-1) |
|
|
Weight |
Approx. 26.5 g (in the case of a DPDT switch key) |
|
|
Ambient operating temperature |
-10°C to 55°C (with no icing or condensation) |
|
|
Ambient operating humidity |
35% to 85%RH |
|
|
Ambient storage temperature |
-25°C to 65°C (with no icing or condensation) |
|
Screw-less Clamp
|
Item |
Type |
Screw-less Clamp |
|||
|
Recommended wire size |
0.5 mm2 twisted wire or 0.8 mm-dia. solid wire |
||||
|
Usable wires and tensile strength |
Twisted wire |
0.3 mm2 |
0.5 mm2 |
0.75 mm2 |
1.25 mm2 |
|
Solid wire |
0.5 mm dia. |
0.8 mm dia. |
1.0 mm dia. |
--- |
|
|
Tensile strength |
10 N |
20 N |
30 N |
40 N |
|
|
Length of exposed wire |
10 ± 1 mm |
||||
|
Compliant standards |
JIS C 2811 Terminal Blocks for Industrial Use |
||||
Operating Characteristics
|
Type |
Key-type Selector Switch |
|
|
Characteristics |
2 notches |
3 notches |
|
Operating torque (OF) max. |
0.1 Nm |
|
|
Set position (SP) |
90 ± 5 ° |
45° +10, 0 |
Operation Angle
Note: The angle used for automatic reset is shown in parentheses.
FP: Free position
Contact Configuration
|
No. of notches |
Contact configuration |
||||
|
SPDT |
DPDT |
||||
|
Position |
SW |
Position |
SW2 |
SW1 |
|
|
2 notches |
|
|
|
|
|
|
|
|
|
|
|
|
|
3 notches |
--- |
|
|
|
|
|
|
|
|
|||
|
|
|
|
|||
