Item

Size

M12

M18

M30

Shielded

Shielded

Model

E2E-X3B4-IL[]

E2E-X7B4-IL[]

E2E-X10B4-IL[]

Sensing distance

3 mm ±10%

7 mm ±10%

10 mm ±10%

Set distance *1

0 to 2.4 mm

0 to 5.6 mm

0 to 8 mm

Differential travel

10% max. of sensing distance

Detectable object

Ferrous metal
 (The sensing distance decreases with non-ferrous metal. Refer to Engineering
 Data on Catalog.)

Standard sensing object

Iron, 12 × 12 × 1 mm

Iron, 18 × 18 × 1 mm

Iron, 30 × 30 × 1 mm

Response frequency *2

1 kHz

0.5 kHz

0.4 kHz

Power supply voltage

10 to 30 VDC (including 10% ripple (p-p))

Current consumption

20 mA max.

Control output

Load current

100 mA max.

Residual voltage

2 V max. (Load current: 100 mA, Cable length: 2 m)

Indicators *1

In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and stability
 indicator (green, lit)
 In the IO-Link mode: Operation indicator (orange, lit) and communication indicator
 (green, blinking at 1 s intervals)

Operation mode

PNP NO/NC switching type (Factory setting: NO)
 Refer to the timing charts under I/O Circuit Diagrams on Catalog for details.

Protection circuits

Power supply reverse polarity protection, output reverse polarity protection, surge
 suppressor, and output short-circuit protection

Ambient temperature range

Operating/Storage: -25 to 70°C (with no icing or condensation)

Ambient humidity range

Operating/Storage: 35% to 95% (with no condensation)

Temperature influence

±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

Voltage influence

±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance

Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z
 directions

Shock resistance

Destruction: 1,000 m/s² 10 times each in X, Y, and Z directions

Degree of protection

IEC 60529 IP67, in-house standards: oil-resistant *3

Connection method

Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
 (Standard cable length: 0.3 m)

Materials

Case

Nickel-plated brass

Sensing surface

PBT

Clamping nuts

Nickel-plated brass

Toothed washer

Zinc-plated iron

Main IO-Link functions

Operation mode switching between NO and NC, self diagnosis enabling, excessive
 proximity judgment distance selecting, timer function of the control output and
 timer time selecting, instability output (IO-Link mode) ON delay timer time selecting
 function, monitor output, operating hours read-out, and initial reset

Communication
 specifications

IO-Link
 specification

Ver 1.1

Baud rate

-IL3: COM3 (230.4 kbps), -IL2: COM2 (38.4 kbps)

Data length

PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)

Minimum cycle
 time

-IL3 (COM3): 1 ms, -IL2 (COM2): 2.3 ms

Accessories

Instruction manual