Smart Proximity Sensor
E2NC
Smart Proximity Sensor with Separate Amplifier Enables Easily Making Highprecision Sensitivity Settings.
Sensors
Sensor Heads
|
Type |
Appearance |
Sensing |
Repeat |
Cable specification |
Model |
|
|
Shielded |
Cylindrical |
3 dia. × 18 mm |
0.6 mm |
1 μm |
Free cutting *2 |
E2NC-EDR6-F |
|
5.4 dia. × 18 mm |
1 mm |
1 μm |
Standard *2 |
E2NC-ED01 |
||
|
Free cutting *2 |
E2NC-ED01-F |
|||||
|
With Protective |
E2NC-ED01-S |
|||||
|
8 dia. × 22 mm |
2 mm |
2 μm |
Standard *2 |
E2NC-ED02 |
||
|
Free cutting *2 |
E2NC-ED02-F |
|||||
|
With Protective |
E2NC-ED02-S |
|||||
|
Screw |
M10 × 22 mm |
2 mm |
2 μm |
Standard *2 |
E2NC-EM02 |
|
|
Free cutting *2 |
E2NC-EM02-F |
|||||
|
With Protective |
E2NC-EM02-S |
|||||
|
Flat |
30 × 14 × 4.8 mm |
5 mm |
2 μm |
Standard *2 |
E2NC-EV05 |
|
|
Free cutting *2 |
E2NC-EV05-F |
|||||
|
With Protective |
E2NC-EV05-S |
|||||
|
Unshielded |
Screw |
M18 × 46.3 mm |
7 mm |
5 μm |
Standard *2 |
E2NC-EM07M |
|
Free cutting *2 |
E2NC-EM07M-F |
|||||
|
With Protective |
E2NC-EM07M-S |
|||||
|
Heat- |
Screw |
M12 × 22 mm |
2 mm |
2 μm |
Standard *2 |
E2NC-EM02H |
1. Ask your OMRON representative for information on the Protective Spiral Tube.
2. Standard models and models with Protective Spiral Tube: The standard cable length is 2.6 m, Free-cut models: The standard cable length is 3.6 m. (Standard cable length is the length containing the preamplifier and connector.)
Amplifier Units
|
Type |
Appearance |
Connection method |
Input/output |
Model |
|
|
NPN output |
PNP output |
||||
|
Advanced models |
|
Pre-wired (2 m) |
2 outputs + 1 input |
E2NC-EA21 2M |
E2NC-EA51 2M |
|
|
Wire-saving Connectors |
2 outputs |
E2NC-EA7TW |
E2NC-EA9TW |
|
|
|
Wire-saving Connectors |
1 output + 1 input |
E2NC-EA7 |
E2NC-EA9 |
|
|
Model for Sensor |
|
Connector for Sensor |
--- |
E2NC-EA0 |
|
|
|
Connector for Sensor |
1 output |
E2NC-EA10 2M |
E2NC-EA40 2M |
|
A Sensor Communications Unit is required if you want to use the Amplifier Unit on a network.
Accessories (Sold Separately)
Wire-saving Connectors (Required for models for Wire-saving Connectors.)
Connectors are not provided with the Fiber Amplifier Unit and must be ordered separately.
*Protective stickers are provided.
|
Type |
Appearance |
Cable length |
No. of conductors |
Model |
Applicable Amplifier Units |
|
Master Connector |
|
2 m |
4 |
E3X-CN21 |
E2NC-EA7TW |
|
Slave Connector |
|
2 |
E3X-CN22 |
End Plate
Two End Plates (PFP-M) are provided with the Sensor Communications Unit.
End Plates (PFP-M and E39-EP1) are not provided with the Amplifier Unit. They must be ordered separately as required.
|
Appearance |
Model |
Quantity |
Applicable Amplifier Units |
|
|
PFP-M |
1 |
E2NC-EA21 |
|
|
E39-EP1 |
1 |
E2NC-EA10 |
Related Products
Sensor Communications Units
|
Type |
Appearance |
Model |
|
Sensor Communications Unit for EtherCAT |
|
E3NW-ECT |
|
Sensor Communications Unit for CC-Link |
|
E3NW-CCL |
|
Distributed Sensor Unit * |
|
E3NW-DS |
Refer to your OMRON website for details.
* The Distributed Sensor Unit can be connected to any of the Sensor Communications Units.
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
CC-Link is a registered trademark of Mitsubishi Electric Corporation. The trademark is managed by the CC-Link Partner Association.