Sensing method

Triangulation

Model

NPN Output

E3AS-HL500MN

E3AS-HL500LMN

E3AS-HL150MN

E3AS-HL150LMN

PNP Output/COM3

E3AS-HL500MT

E3AS-HL500LMT

E3AS-HL150MT

E3AS-HL150LMT

Sensing distance *1

35 mm to the set distance

35 mm to the set distance

Setting range *1

35 to 500 mm

35 to 150 mm

Standard detectable difference
 *1

35 to 180 mm: 9 mm
 180 to 300 mm: 18 mm
 300 to 400 mm: 30 mm
 400 to 500 mm: 45 mm
 at 10 m sec

35 to 50 mm: 1 mm
 50 to 100 mm: 2 mm
 100 to 150 mm: 4 mm
 at 10 m sec

Display minimum unit value

1 mm

0.1 mm

Spot size (reference value) *2

2.5 mm × 1.5 mm
 at distance of 500
 mm

18 mm × 1.5 mm
 at distance of 500
 mm

2.5 mm × 1.3 mm
 at distance of 150
 mm

8 mm × 1.3 mm
 at distance of 150
 mm

Light source (wavelength)

Red laser (660 nm), Class1 (IEC/EN60825-1:2014)

Power supply voltage

10 to 30 VDC (including 10% ripple (p-p)), Class2

Current consumption

100 mA max.

Input/
 output

Control output

Load power supply voltage 30 VDC max. (Class2), the total load current of the two
 outputs is 100 mA max.
 Residual voltage (Load current 10 mA max.: 1 VDC max., Load current 10 to 100
 mA: 2 VDC max.)
 Open-collector output (NPN/PNP output depending on model)
 N.O. (Normally Open) / N.C. (Normally Close) selectable

NPN

OUTPUT 1: NO (Normally open), OUTPUT 2: NC (Normally closed)

PNP/COM3

OUTPUT 1: NO (Normally open)/COM[], OUTPUT 2: NC (Normally closed)

External input

Laser OFF / Teaching / Zero reset selectable
 NPN ON time: 0 V short-circuit or 1.5 V or less, OFF time: Power supply voltage
 short-circuit or open
 PNP ON time: Power supply voltage short-circuit or within power supply voltage
 - 1.5 V, OFF time: 0 V short-circuit or open

Response time

1.5 ms / 10 ms / 50 ms selectable

Threshold setting method

Teaching method / Manual Operations / IO-Link communications

Mutual interference prevention

4 units max. (when using the mutual interference prevention function)

Ambient illumination

Receiver surface illuminance:
 Incandescent lamp: 20,000 lx max.,
 Sunlight: 25,000 lx max. at distance of
 250 mm
 Incandescent lamp: 5,000 lx max.,
 Sunlight: 10,000 lx max. at distance of
 500 mm

Receiver surface illuminance:
 Incandescent lamp: 8,000 lx max.,
 Sunlight: 16,000 lx max.

Sensing method

TOF (Time of flight)

Model

Type

Metal case ([]: M), Plastic case ([]: P)

NPN output

E3AS-F1500I[]N

E3AS-F1000I[]N

PNP output/ COM3

E3AS-F1500I[]T

E3AS-F1000I[]T

Sensing distance

50 mm to the set distance
 (White paper or black paper 200 × 200
 mm)

50 mm to the set distance
 (White paper or black paper 200 × 200
 mm)

Setting range

100 to 1,500 mm (White paper 200 ×
 200 mm)
 100 to 1,000 mm (Black paper 200 × 200
 mm)

100 to 1,000 mm (White paper 200 ×
 200 mm)
 100 to 500 mm (Black paper 200 × 200
 mm)

Spot diameter (reference value)

95 mm dia. (at distance of 1,000 mm)

Differential travel

15% max. of set distance (Set distance 200 mm min.)

Reflectivity characteristic
 (black/white error)

10% max. of set distance (Set distance 200 mm min.)

Light source (wavelength)

Infrared laser (940 nm) Class1 (IEC/EN60825-1:2014)

Power supply voltage

10 to 30 VDC (including 10% ripple (p-p)), Class2

Current consumption

30 mA max.

Input/
 output

Control output

Load power supply voltage: 30 VDC max., Class2, Load current: 100 mA max.
 (Residual voltage: Load current of less than 10 mA: 1 V max. Load current of 10 to
 100 mA: 2 V max.)
 Open-collector output (NPN/PNP output depending on model)

NPN

OUTPUT 1: NO (Normally open), OUTPUT 2: NC (Normally closed)

PNP/COM3

OUTPUT 1: NO (Normally open)/COM[], OUTPUT 2: NC (Normally closed)

Response time

Operate or reset: 150 ms max.

Operate or reset: 90 ms max.

Threshold setting method

Teaching method/IO-Link communications

Ambient illumination

Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max.

Sensing method

Triangulation

Model

NPN Output

E3AS-L200MN

E3AS-L80MN

PNP Output/COM3

E3AS-L200MT

E3AS-L80MT

Sensing distance

10 mm to the set distance (White paper or black paper 100 × 100 mm)

Setting range

40 to 200 mm (White paper or black
 paper 100 × 100 mm)

20 to 80 mm (White paper or black
 paper 100 × 100 mm)

Spot diameter (reference value)

25 × 25 mm at distance of 200 mm

4 mm dia. (at distance of 80 mm)

Differential travel

10% max. of set distance

White paper: 2% max. of set distance
 Black paper: 5% max. of set distance

Reflectivity characteristic
 (black/white error)

10% max. of set distance

5% max. of set distance

Light source (wavelength)

Red LED (624 nm)

Red LED (650 nm)

Power supply voltage

10 to 30 VDC (including 10% ripple (p-p)), Class2

Current consumption

35 mA max.

Input/
 output

Control output

Load power supply voltage: 30 VDC max., Class2, Load current: 100 mA max.
 (Residual voltage: Load current of less than 10 mA: 1 V max. Load current of 10 to
 100 mA: 2 V max.)
 Open-collector output (NPN/PNP output depending on model)

NPN

OUTPUT 1: NO (Normally open), OUTPUT 2: NC (Normally closed)

PNP/COM3

OUTPUT 1: NO (Normally open)/COM[], OUTPUT 2: NC (Normally closed)

Response time

Operate or reset: 1 ms max.

Threshold setting method

Teaching method/IO-Link communications

Ambient illumination

Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max.

Series

E3AS-HL

E3AS-F

E3AS-L

Protection circuits

Power supply reverse polarity protection, Output short-circuit protection, and
 Output reverse polarity protection

Ambient temperature range

Operating: -10 to 50°C,
 Storage: -25 to 70°C
 (with no icing or
 condensation)

Operating: -20 to 55°C,
 Storage: -40 to 70°C
 (with no icing or
 condensation)

Operating: -25 to 55°C,
 Storage: -40 to 70°C
 (with no icing or
 condensation)

Ambient humidity range

Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)

Insulation resistance

20 MΩ min. at 500 VDC

Dielectric strength

1,000 VAC, 50/60 Hz for 1 min

Vibration resistance

10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y, and Z
 directions

Shock resistance

500 m/s² for 3 times each in X, Y, and Z directions

Degree of protection

IP67 (IEC60529) and IP67G *1 (JIS C 0920 Annex 1), IP69K (ISO20653)

Indicators

OLED Display (White),
 Power/Communication
 indicator (Green*),
 Operation indicator
 (Orange)
 * IO-Link Communication
 mode: blinking

Operation indicator (orange), Stability & Communication
 indicator (green*)
 * IO-Link Communication mode: blinking

Connection method

Pre-wired (standard cable length: 2 m), M8 Connector, M12 Pre-wired Smartclick
 Connector (standard cable length: 0.3m)

Weight
 (packed state/
 Sensor only)

Pre-wired
 (2 m)

Approx. 180 g/
 approx. 110 g

Metal case type:
 Approx. 135 g/approx. 90 g
 Plastic case type:
 Approx. 115 g/approx. 70 g

Approx. 135 g/
 approx. 90 g

M8 Connector

Approx. 120 g/
 approx. 50 g

Metal case type:
 Approx. 75 g/approx. 30 g
 Plastic case type:
 Approx. 60 g/approx. 15 g

Approx. 75 g/
 approx. 30 g

M12 Pre-wired
 Smartclick
 Connector
 (0.3m)

Approx. 150 g/
 approx. 80 g

Metal case type:
 Approx. 95 g/approx. 50 g
 Plastic case type:
 Approx. 75 g/approx. 30 g

Approx. 95 g/
 approx. 50 g

Materials

Case

Stainless steel
 (SUS316L)

Metal case type:
 Main unit/mounting part/
 connector part
 Stainless steel (SUS316L)
 Plastic case type: Main unit
 Polybutylene terephthalate
 (PBT) /polycarbonate (PC),
 Mounting part/connector part
 Nickel-plated brass

Stainless steel
 (SUS316L)

Lens cover
 and Display

Methacrylic resin (PMMA) (Lens cover: Antifouling coating)

Indicator

Polyamide 11 (PA11)

Metal case type:
 Polyamide 11 (PA11)
 Plastic case type:
 Polyethersulfone (PES)

Polyamide 11 (PA11)

Main IO-Link functions

Operation mode switching between NO and NC, execution of teaching (2-point
 teaching, Background teaching), setup of the threshold, timer function of the control
 output and timer time selecting, Restore Factory Settings, Key Lock (Unlock, Lock,
 Lock (No Button)), monitor output* (Detection level, Incident light level) * Only for
 E3AS-HL and E3AS-F

IO-Link
 Communication
 specifications

IO-Link
 specification

Ver. 1.1

Baud rate

COM3 (230.4 kbps)

Data length

PD size: 4 bytes, OD size: 1 byte (M-sequence type:
 TYPE_2_V)

PD size: 1 byte,
 OD size: 1 byte
 (M-sequence type:
 TYPE_2_1)

Minimum cycle
 time

COM3: 1.2 ms

Accessories

Instruction manual, compliance sheet, index list (attached for IO-Link type only)
 E3AS-HL: FDA certification label and Warning label
 E3AS-F: FDA certification label
 Note: Mounting Brackets must be ordered separately.