Color Mark Detection Compact Photoelectric Sensor

E3ZM-V

Color Mark Detection in a World-standard Size (11 × 21 × 32 mm), with High-speed Response (50 μs) and Accuracy in Spite of Sensing Object Movement

Sensor

Sensing method

Appearance

Connection method

Sensing distance

Model

NPN output

PNP output

Mark Sensor
 (Diffuse reflective)

 image

Pre-wired (2 m)

12±2 mm *
 (White light)

E3ZM-V61 2M

E3ZM-V81 2M

Connector (M8, 4 pins)

E3ZM-V66

E3ZM-V86

* A deviation of ±2 mm (typical value) can be handled for combinations of white, yellow, and black. Refer to Data Sheet
   for the detection capability for other color combinations.

Accessories

Sensor I/O Connectors (Sockets on One Cable End)

(Models for Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.) 

Size

Cable

Appearance

Cable type

Model

M8 (4 pins)

Standard

Straight *1

image

2 m

4-wire

XS3F-E421-402-A

5 m

XS3F-E421-405-A

L-shaped *1 *2

image

2 m

XS3F-E422-402-A

5 m

XS3F-E422-405-A

Note: The outer cover of the cable is made of PVC (polyvinyl chloride), the nut is SUS316L, and the degree of protection
           is IP67. When high-pressure washing will be used, select an I/O Connector that has IP69K degree of protection.
 1. The connector will not rotate after connecting.
 2. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.

Mounting Brackets

A Mounting Bracket is not provided with the Sensor. Order a Mounting Bracket separately if required. 

Appearance

Model
 (Material)

Quantity

Remarks

Appearance

Model
 (Metal
 material)

Quantity

Remarks

image

E39-L153 
 (SUS304) *1

1

Mounting Brackets

image

E39-L98 
 (SUS304) *2

1

Protective Cover Bracket

image

E39-L104 
 (SUS304) *1

1

image

E39-L150 
 (SUS304)

1

(Sensor adjuster)
 Easily mounted to the aluminum
 frame rails of conveyors and
 easily adjusted.
 For vertical angle adjustment

image

E39-L43 
 (SUS304) *2

1

Horizontal Mounting
 Brackets

image

E39-L151 
 (SUS304)

1

image

E39-L142 
 (SUS304) *2

1

Horizontal Protective
 Cover Bracket

image

E39-L44 
 (SUS304)

1

Rear Mounting Bracket

image

E39-L144 
 (SUS304) *2

1

Compact Protective Cover
 Bracket

Note: When using Through-beam models, order one bracket for the Receiver and one for the Emitter.
 1. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired
        Connector models.
 2. Cannot be used for Standard Connector models.