Color Mark Detection Compact Photoelectric Sensor
E3ZM-V
Color Mark Detection in a World-standard Size (11 × 21 × 32 mm), with High-speed Response (50 μs) and Accuracy in Spite of Sensing Object Movement
Sensor
|
Sensing method |
Appearance |
Connection method |
Sensing distance |
Model |
|
|
NPN output |
PNP output |
||||
|
Mark Sensor |
|
Pre-wired (2 m) |
12±2 mm * |
E3ZM-V61 2M |
E3ZM-V81 2M |
|
Connector (M8, 4 pins) |
E3ZM-V66 |
E3ZM-V86 |
|||
* A deviation of ±2 mm (typical value) can be handled for combinations of white, yellow, and black. Refer to Data Sheet
for the detection capability for other color combinations.
Accessories
Sensor I/O Connectors (Sockets on One Cable End)
(Models for Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)
|
Size |
Cable |
Appearance |
Cable type |
Model |
||
|
M8 (4 pins) |
Standard |
Straight *1 |
|
2 m |
4-wire |
XS3F-E421-402-A |
|
5 m |
XS3F-E421-405-A |
|||||
|
L-shaped *1 *2 |
|
2 m |
XS3F-E422-402-A |
|||
|
5 m |
XS3F-E422-405-A |
|||||
Note: The outer cover of the cable is made of PVC (polyvinyl chloride), the nut is SUS316L, and the degree of protection
is IP67. When high-pressure washing will be used, select an I/O Connector that has IP69K degree of protection.
1. The connector will not rotate after connecting.
2. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.
Mounting Brackets
A Mounting Bracket is not provided with the Sensor. Order a Mounting Bracket separately if required.
|
Appearance |
Model |
Quantity |
Remarks |
Appearance |
Model |
Quantity |
Remarks |
|
|
E39-L153 |
1 |
Mounting Brackets |
|
E39-L98 |
1 |
Protective Cover Bracket |
|
|
E39-L104 |
1 |
|
E39-L150 |
1 |
(Sensor adjuster) |
|
|
|
E39-L43 |
1 |
Horizontal Mounting |
|
E39-L151 |
1 |
|
|
|
E39-L142 |
1 |
Horizontal Protective |
||||
|
|
E39-L44 |
1 |
Rear Mounting Bracket |
|
E39-L144 |
1 |
Compact Protective Cover |
Note: When using Through-beam models, order one bracket for the Receiver and one for the Emitter.
1. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired
Connector models.
2. Cannot be used for Standard Connector models.