Product Category

Safety Components

Safety Light Curtains / Safety Multi-Light Beams / Single-beam Safety Sensors

Safety Light Curtains

F3SG-SR / PG Series

F3SG-RA-01TS / 02TS

F3W-MA

F3SJ Series

Smart Muting Actuator

F3W-MA

Integrated muting sensor based on multi-beam photoelectric sensor

Line Up
Specification

Smart Muting Actuator

Appearance

Beam Gap between Muting
 Trigger Beams

output

Number of Beams

Model

 image

100 mm

PNP output

8

F3W-MA0100P

300 mm

20

F3W-MA0300P

Note: Use with the PNP output model safety light curtain. 

Accessories (Sold separately)

Single-Ended Cable *

Appearance

Type

Cable
 length

Specifications

Model

image

M12 connector
 (5-pin), 5 wires
 Color: Gray

3 m

image

F39-JG3A-L

7 m

F39-JG7A-L

10 m

F39-JG10A-L

15 m

F39-JG15A-L

20 m

F39-JG20A-L

For receiver
 M12 connector
 (8-pin), 8 wires
 Color: Black

3 m

image

F39-JG3A-D

7 m

F39-JG7A-D

10 m

F39-JG10A-D

15 m

F39-JG15A-D

20 m

F39-JG20A-D

* A set of two Single-Ended Cables (one for emitter and one for receiver) is also available.
 Model: Model number without the -L/-D at the end (F39-JG[]A) 

Double-Ended Cable *

Appearance

Type

Cable
 length

Specifications

Model

image

M12 connector
 (5-pin)
 on both ends
 Color: Gray

0.5 m

image

F39-JGR5B-L

1 m

F39-JG1B-L

3 m

F39-JG3B-L

5 m

F39-JG5B-L

7 m

F39-JG7B-L

10 m

F39-JG10B-L

15 m

F39-JG15B-L

20 m

F39-JG20B-L

M12 connector
 (8-pin)
 on both ends
 Color: Black

0.5 m

image

F39-JGR5B-D

1 m

F39-JG1B-D

3 m

F39-JG3B-D

5 m

F39-JG5B-D

7 m

F39-JG7B-D

10 m

F39-JG10B-D

15 m

F39-JG15B-D

20 m

F39-JG20B-D

* A set of two Double-Ended Cables (one for emitter and one for receiver) is also available.
 Model: Model number without the -L/-D at the end (F39-JG[]B) 

4-Joint Plug/Socket Connector Used for reduced wiring for connecting F3W-MA with F3SG-RA.

Appearance

Type

Specifications

Model

image

For emitter
 M12 connectors.
 Used for
 reduced wiring.

image

F39-GCN4-L

image

For receiver
 (PNP output)
 M12 connectors.
 Used for
 reduced wiring.

image

F39-GCN4-D

image

Includes one
 each of
 F39-GCN4-L and
 F39-GCN4-D

-

F39-GCN4

image

Water-resistive
 Cover for
 4-Joint
 Plug/Socket
 Connector

One water-resistive cover for an F39-GCN4-L/-D
 4-Joint Plug/Socket Connector. You can use this when
 the MA2 connector part is not used.
 Material: PBT. IP67 rated when attached. Smartclick
 mechanism.

XS5Z-11

image

Dust Cover for
 4-Joint
 Plug/Socket
 Connector

One dust cover for an F39-GCN4-L/-D 4-Joint Plug/
 Socket Connector. You can use this when the MA2
 connector part is not used.
 Material: Rubber/black. This cover does not ensure
 IP67 degree of protection.
 XS2Z-14: Attach to a pin block inside the M12 female
 screw.
 XS2Z-15: Attach to a M12 female screw. When
 attaching the cover to the connector, press the cover
 onto the connector until the connector is fully inserted
 into the cover.

XS2Z-14

image

XS2Z-15

Sensor Mounting Brackets

Appearance

Specification

Application

Remarks

Model

image

Standard Fixed
 Bracket

Bracket to mount the F3W-MA.
 Side mounting and backside mounting possible.

Two brackets
 per set

F39-LGF

image

Standard
 Adjustable
 Bracket

Bracket to mount the F3W-MA.
 Beam alignment after mounting
 possible.The angle adjustment range is ±15°.
 Side mounting and backside mounting possible.

Two brackets
 per set

F39-LGA

image

F3W-MA
 Bracket

Bracket to fix the F3W-MA to the F3SG-RA.
 F39-LGMAL: L-shaped configuration
 F39-LGMAT: T-shaped configuration
 Beam alignment after mounting possible.
 When using the F3W-MA Bracket, it is
 necessary to add an extra Standard Adjustable
 Bracket (F39-LGA) to the F3SG-RA. *
 Please also purchase Standard Adjustable
 Bracket (F39-LGA).

Two brackets
 per set

F39-LGMAL

image

F39-LGMAT

Note: When mounting an F3W-MA0300P in the L-shaped configuration, the shock resistance becomes as follows.
Shock resistance: 50 m/s2, 1000 shocks for all 3 axes
 For mounting an F3W-MA0300P under a shock environment exceeding this, the F3W-MA Bracket cannot be used.
 Use a Standard Adjustable Bracket (F39-LGA).
 * When using F39-LGMA[], there are some restrictions on the brackets to mount the F3SG-RA.
     This bracket is not usable together with F39-LGF.
     When using together with the F39-LGA, the protective height of the F3SG-RA must be 270 mm or longer.
     When using together with F39-LGTB, the protective height of the F3SG-RA must be 400 mm or longer.
     An extra F39-LGA is required for reinforcement, depending on the mounting position of the F39-LGMA[].
     Refer to "Dimensions" for details.