piccolo™ Controller P116 / P108 / P104
piccolo™ Controller P116 / P108 / P104
General Purpose Temperature and Process Controller
piccolo™ controllers offer precision PID control of temperature and other processes with many advanced features not normally found in this class of controllers.
Description
Features:
- Precision PID control
- Easy to use and apply
- High reliability and quality
- Three year warranty
- Ramp-soak timer and soft start
- Overshoot elimination
- Energy usage estimation
- Heater failure detection
- Modbus RTU digitalm communications
- Digital setpoint retransmission
- Analogue retransmission
- Simplified and customisable operator HMI
- High visibility three colour
- LED display
- Wipedown front fascia
- Recovery point “undo” function
- Configuration adaptor
- iTools Wizard
Designed to offer outstanding performance in an affordable package providing a complete solution for a wide variety of applications, this range guarantees extremely easy access to parameterization and operation in a high quality unit.
Despite their advanced features, the controllers are easy to use and apply and may be customised for ease of operation. Full autotune is provided.
Ramp-soak timer and soft start
A ramp soak timer is provided for time based profiling of temperature sequences. These can be used to gradually vary the temperature in a control zone before maintaining it at a defined level, and is typically used to avoid the dangers of damage due to thermal shock.
Overshoot elimination
The unique cutback system ensures precise control to setpoint and when correctly tuned inhibits temperature overshoot.
Ideal for:
- Precision PID controller
- Plastics Extrusion
- Food and Beverage
- Furnaces and Ovens
- Incubators
- Laboratory equipment
Specification
Input Type | mA, mV, RTD, TC, Volts |
---|---|
Auxiliary Switches | No |
Panel size (DIN) | 1/16, 1/4, 1/8 |
PV Accuracy | <0.2% |
Digital OUT Relay/ SSR | 3 (1/16), 4 (1/8 – 1/4) |
Analogue IP/OP Out | 1 |
Digital IP/OP In | 1 (1/16), 2 (1/8 – 1/4) |
Load Failure Detection (CT Input) | fail/leakage, Heater |
IP Rating | IP66, NEMA12 |
Display Type | 2 x 4 dig LED, 3 x 4 dig LED |
Control Types | On/Off, PID |
Alarm Types | Dev, Hi, Lo, Sensor Break |
Supply Voltage | 24V dc/ac, 85-264V ac |
Transmitter Power Supply | (1/8 –1/4), 24V dc |
SP Programmer | – |
Digital Comms | RS485 Modbus |
Timer | Delay Soft Start, Ramp Soak |
Real Time Clock | – |