Electrode Holder
PS-[]S(R) / -31
Separate Electrode Holders for Water Supply and Drainage Control in Buildings. Small, Lightweight Electrode Holders for Use as Built-in Components.
|
Model |
PS-3S(R) *1 |
PS-4S(R) *1 |
PS-5S(R) *1 |
PS-31 *2 |
|
No. of Electrodes |
3 |
4 |
5 |
3 *3 |
|
Material |
Resin (PBT = Polybutylene terephthalate) |
|||
|
Insulation resistance |
100 MΩ min. |
|||
|
Operating temperature |
-10 to 70°C (with no icing) |
|||
|
Operating pressure |
Atmospheric pressure |
|||
|
Applications |
Water supply and drainage control in buildings |
Limited Mounting Space |
||
|
Electrodes |
Purchase F03-01 separately. |
Single-piece construction |
||
Note:
1. The Two-wire Electrode Holders (R models) have a built-in resistor of 6.8 kΩ. They should be used with the Two-wire 61F Controllers.
2. Cut the electrodes to the desired length.
3. PS-31 comes in a 3-pole model only.