System products
Endress+Hauser System products is one of the world’s leading providers of measuring instruments and complete systems for System products.
Products List
Commubox FXA195 USB/HART modem
World’s only intrinsically safe HART/USB interface for Device & FieldCare and FieldXpert software
Predecessor: Commubox FXA191
- Input: USB signal as per USB specification.
- Output: Connects HART field devices with the USB interface of a laptop
Product picture surge arrester HAW562 HAW562 Surge arrester
Surge arrester for DIN rail according to IEC 60715
HAW569 Surge arresters
Surge arresters for field mounting
EngyCal RH33 BTU meter
Custody transfer BTU meter for recording heat quantities of water
- Input: 1x Puls/Analog
2x RTD/Analog
Loop power supply 24V DC (+/-16%) - Output: 1x 4…20mA
2x digital (Open Collector) - Display: 160 x 80 Dot-Matrix LCD with white backlit
colour change in case of alarm event
active display area 70 x 34 mm - Calculations: heat quantity and heat quantity difference
RIA15 Loop-powered indicator for 4 to 20 mA or HART signals
For the indication of the 4 to 20 mA signal or the HART® values in the field or in the panel!
Predecessor: Process indicator RIA251, Field indicator RIA261, VU2550, VU2551
Hide details
- Input: 1 x analogue 4…20 mA/HART®
- Output: Not defined
- Display: LCD 17 mm (0.67″)
5-digit
7-segment bargraph
Plain text display for unit/TAG
Activatable backlight - Power Supply: Loop powered
RMA42 Process transmitter with control unit
Universal transmitter, loop power supply, barrier and limit switch in one device!
Predecessor: Process transmitter RMA421, Process transmitter RMA422, XTN170
- Input: 2 x universal (current, voltage, R, RTD, TC, resistance)
- Output: 2 x Analog (current, voltage)
- Output: 2 x Analog (current, voltage)
- Display: LCD
7 segment
Multicolour
Bargraph
TAG unit
Colour change in case of failure - Power Supply: Not defined
RN22 active barrier, power supply, analog signal doubler
Intrinsically safe 24 VDC compact interface module for use in hazardous areas, SIL systems
Predecessor: Transmitter Supply RN221N
- Input: 0/4…20 mA / HART
feeding/not feeding - Output: 0/4…20 mA / HART
active/passive - Power Supply: 24 V DC
RNB22 system power supply unit
Safely power system interfaces on the DIN rail bus
Predecessor: System power supply RNB130
- Output: 24…28 V DC
- Power Supply: 100…240 V AC/DC
Field Xpert SMT50
Universal, high-performance tablet PC for device configuration
- InputL: 2 MP camera on the front, 5 MP camera or better, on the rear
Field Xpert SMT70
Universal, high-performance tablet PC for device configuration
Predecessor: Field Xpert SFX370, Field Xpert SFX350
- Input: Camera:
• 5 MP camera on the back with auto focus and LED flash with 1500 mcd
• 2 MP camera on the front
Scanner:
• 1D/2D barcode scanner
RIA46 Field meter with control unit
Multifunctional field meter for monitoring and indication of analog measured values
- Input: 2 x universal (U, I, R, RTD, TC)
- Output: 2 x analogue output (I, U) 1 x loop power supply
- Output: 2 x analogue output (I, U)
1 x loop power supply
Display - Multicolor backlight LCD
White/black/yellow
Bargraph
Unit
TAG
Alarm warning in plain text - Power Supply: 20…250V AC/DC
RLN22 isolating amplifier
Safe and reliable switching operations in critical systems
- Input: NAMUR
blocking: < 1,2 mA
conducting: > 2,1 mA - Output: relay contact
- Power Supply: 24 V DC
RN42 active barrier, wide range power supply
1-channel wide range supply and active barrier for safe isolation of 4 to 20 mA standard signal circuits
Predecessor: Transmitter Supply RN221N
- Input: 0/4…20 mA / HART
feeding/not feeding - Output: 0/4…20 mA / HART
active/passive - Power Supply: 24…230 V AC/DC
Memograph M RSG45 Advanced Data Manager
Saves, visualizes, analyzes and communicates
Predecessor: Memograph M RSG40, Application manager RMM621, Memograph RSG10, Memograph S RSG12, TL, TN, TP, ML, M3, MT, MULCNT, PRIEVT, MULEVT, TL
- Input: 0…20 universal
HART
6…14 digital - Output: 2 analog
- Display: 7“ TFT
- Storage/Recording: internal memory
SD card
USB flash drive - Calculations: Mass/heat quantity heat quantity difference
Bunker Metering Computer SBC600
Providing accuracy and efficiency in bunkering
FieldPort SWA50
Intelligent Bluetooth® and/or WirelessHART adapter for all HART field devices
- Output
WirelessHART and/or Bluetooth® communication interface,
Operating frequency: 2.4 GHz (ISM band),
Transmission range under reference conditions:
WirelessHART communication – up to 200 m (656 ft),
Bluetooth communication – up to 40 m (131 ft)
WirelessHART Adapter SWA70
Smart WirelessHART interface module with power supply for field devices
- Output: WirelessHART communication interface
Transmission rate: Nominal 250 kBits/s
Operating frequency: 2.4 GHz (ISM band)
Transmission range under reference conditions:
Outdoor 250 m, indoor 50 m - Display: Integral via 3 LEDs
FieldGate SWG50
Functional WirelessHART gateway
WirelessHART Fieldgate SWG70
Intelligent WirelessHART gateway with Ethernet and RS-485 interfaces
- Output: Ethernet (10 BASE-T/10 BASE TX)
– Configurable for HART IP and MODBUS TCP communication
RS-485 serial interface
– Configurable for HART Version 7.0 or MODBUS RTU communication
EtherNet/IP interface - Display: Integral via 5 LEDs
Fieldgate SFG500 Intelligent Ethernet/PROFIBUS gateway
Parallel access to PROFIBUS networks, monitoring of PROFIBUS and HART device status
Predecessor: Fieldgate FXA720
RB223 Loop powered passive barrier
One or two-channel barrier for the safe separation of 4…20 mA standard signal circuits
Predecessor: TCM141
- Input: 2 x analog 4…20 mA
- Output: 2 x analog 4…20 mA
RIA14 Loop-powered field indicator
Excellent readable indication of a 4…20 mA signal on-site for a better process overview!
Predecessor: Field indicator RIA141
- Input: 1 x analogue 4…20 mA
- Output: 1 x open collector
- Output: 1 x open collector
- Display: LCD 20 mm (0.79″)
5-digit
Bargraph
Plain text display - Power Supply: Loop powered
RIA16 Loop-powered indicator
Excellently readable indication of 4…20 mA signal with trend bar graph for a better process overview
Predecessor: Field indicator RIA261
- Input: 1 x analogue 4…20 mA
- Output: 1 x open collector
- Output: 1 x open collector
- Display: LCD 26 mm (1.02″)
5-digit
Bargraph
Plain text display - Power Supply: Loop powered
RIA45 Process meter with control unit
Multifunctional panel mounted process meter for monitoring and indication of analog measured values
Predecessor: Process indicator RIA250, TMT2153, TMT2174, TMT2175, TMT2173, TMT2155, VU2650, VU2653
- Input: 2 x universal (U, I, R, RTD, TC)
- Output: 1 x loop power supply
- Output: 2 x analogue output (I, U)
1 x loop power supply - Display: Multicolor backlight LCD
White/black/yellow
Bargraph
Unit
TAG
Alarm warning in plain text - Power Supply: 20…250V AC/DC
RIA452 Process indicator with pump control
Digital process meter in panel mounted housing for monitoring and displaying analog measured values
Predecessor: Process display RIA450, XT150, XT450
- Input: 1 x analog (U, I, RTD, TC, R)
- Output: 1 x analog (U, I)
1 x transmitter power supply - Output: 1 x analog (U, I)
1 x transmitter power supply - Display: LCD multicolour
Illuminated
Bargraph - Power Supply: 90…250 V AC, 20…28 V AC, 20…36 V DC
RLN42 NAMUR isolating amplifier
Two-channel NAMUR isolating amplifier for the transmission of binary switch signals
- Input: NAMUR
blocking: < 1,2 mA
conducting: > 2,1 mA - Output: relay contact
- Power Supply: 20…250 V AC/DC
RNO22 output amplifier
Safe and reliable control of active components
- Input: 0/4…20 mA / HART
passive - Output: 0/4…20 mA / HART
active - Power Supply: 24 V DC
EngyCal RS33 Steam calculator
Steam calculator for recording steam mass and energy flow for saturated or superheated steam
- Input: 1x Puls/Analog for flow
2x RTD/Analog for temperature and pressure
Loop power supply 24V DC (+/-16%) - Output: 1x 4…20mA
2x digital (Open Collector) - Display: 160 x 80 Dot-Matrix LCD with white backlit
colour change in case of alarm event
active display area 70 x 34 mm - Calculations: IAPWS-IF97
iTHERM TrustSens self-calibration Monitoring
Automated temperature measurement solution – 100% compliance, 0% effort
Reliable & easy:
- Cost reduction by saving calibration costs and reducing calibration cycles
All required components in one bundle, nothing is forgotten
- 100% compliance and audit-proof documentation:
- Fully traceable calibration with automated documentation
- Tamper-proof data storage according to FDA 21 CFR Part 11
- Predictive maintenance
- Calibration with timestamp
Risk reduction and elimination of undetected failures:
- Higher process transparency
- Higher product safety
RA33 Batch Controller
Recording and controlling of batch operations
- Input: 1 x analogue (I) / pulse (for flow)
1 x RTD (for temperature)
1 x analogue (I) (for density)
Loop power supply 24V DC (+/-16%) - Output: 1 x analogue (I) / pulse (active)
2 x open collector - Display: 160 x 80 Dot-Matrix LCD with white backlit
Colour change in case of alarm event
Active display area 70 x 34 mm - Calculations: Volume calculation
RID14 8 channel field indicator for fieldbuses
Indication of up to 8 process or calculated values for FOUNDATION Fieldbus™ or PROFIBUS® PA protocol
Predecessor: PROFIBUS-PA indicator RID261
- Input: Foundation Fieldbus protocol
PROFIBUS PA protocol - Output: Not defined
- Display: High contrast backlit LCD with bargraph
TAG/unit - Power Supply: Not defined
RID16 8 channel field indicator for fieldbuses
Indication of up to 8 process or calculated values for FOUNDATION Fieldbus™ or PROFIBUS® PA protocol
Predecessor: PROFIBUS-PA indicator RID261
- Input: Foundation Fieldbus protocol
PROFIBUS PA protocol - Output: Not defined
- Display: High contrast backlit LCD with bargraph
TAG/unit - Power Supply: Not defined
RNF22 power feed-in and error message module
Safely power and monitor system interfaces on the DIN rail bus
- Input: 24 V DC
- Output: Uin – 0,8 V
- Power Supply: 24 V DC
Ecograph T RSG35 Universal Graphic Data Manager
Paperless recording, visualization and monitoring of the process values at the same time
Predecessor: Chromalog SP CHROSP, RD10, RD10S, Alphalog RSA10, Ecograph RSG20, Ecograph A RSG22, Ecograph C RSG24, Ecograph T RSG30, Chroma-Log SL RSL, Chromalog T RSL30, PRILOG, MULLOG, CHROML, CHROMP, MULVAR
- Input
- 12 analog (max) (U, I, TC, RTD, frequency, pulse)
6 digital (max) - Output: 6 relays (max)
1 transmitter power supply - Display: TFT 5.7″ colour graphic display
- Power supply: 100…230 V AC +/-10%
24V (-10%, +15%) AC/DC - Storage/Recording: Internal memory
SD card
USB flash drive - Storage/Recording: internal memory, SD card, USB flash drive
Gateway for measurement values Fieldgate FXA42
Communication of measurement values of connected 4 to 20mA analog as well as digital field devices
Predecessor: Fieldgate FXA520, Fieldgate FXA320, FXZ520, FXA360, FXA560
- Input: 4x 4…20 mA analog
4x digital
Pulse counter
Modbus TCP
Modbus RS485 - Output: 4x digital, Modbus TCP , Modbus RS485
Tank gauging Tank Side Monitor NRF81
Field gateway for tank sensor operation, monitoring and integration into inventory control system
Predecessor: Tank Side Monitor NRF590
Tankvision Inventory management Gauge Link NXA20
Acquires data from non Endress+Hauser field instruments and converts it to Modbus
- Input: Enraf BPM; Saab TRL/2
- Output: Modbus RS485
Tankvision Inventory management Tank Scanner NXA820
Acquires data from field instruments
Predecessor: NRM571, NRS57, Tankvision Field Link NXA30, NXS310, NR30
- Input: Modbus RS485; V1; WM550
- Output: Ethernet; OPC DA Server (installed on a separate PC)
Tankvision Inventory management Data Concentrator NXA821
Consolidates data from connected Tank Scanners NXA820
Predecessor: NRM571, NRS57, NXS310
- Input: Connection to NXA820
- Output: Ethernet; Serial Printer port according to PTB
Tankvision Inventory management Host Link NXA822
Communicates data to other system (Modbus)
Predecessor: NRM571, NRS57, NXS310
- Input: Connection to NXA820
- Output: Ethernet; Modbus Ethernet; Modbus RS485
Tankvision Multi Scan NXA83B
Gateway component for Tank Gauging systems
Predecessor: Tankvision Multi Scan NXA83
- Input: 3 versions:
4 Channel; 12 Channel; 20 Channel
With following possible protocols:
Modbus RS485; V1; WM550;
Tokyo Keiso FW9000; Varec
Mark/Space; Saab TRL/2; Enraf
BPM; Scientific Instruments;
Modbus Ethernet - Output: OPC DA; Modbus RS485; Modbus Ethernet
Tankvision LMS NXA86B
LNG Tank Gauging system
Predecessor: NXA86
RN221N Active barrier with optional HART® diagnosis
Active barrier with power supply for safe separation of 4…20 mA current circuits
Predecessor: RN221, NY9170, HAA420Z
Successor: Active Barrier 24V DC RN22, Active Barrier 24-230V AC/DC RN42
- Input: 1 x analog 4…20 mA
- Output: 1 x analog 4…20 mA
FieldPort SFP20
USB modem for the configuration of IO-Link devices
Field Xpert SMT77
Universal, high-performance tablet PC for device configuration in Ex Zone 1 areas
Predecessor: Field Xpert SFX370
Overfill Prevention System SOP300
For reliable and secure tank overfill prevention