Confocal Fiber Displacement Sensor Sensor Head

ZW-SQ Series

Ultra-compact and Ultra-lightweight. Stable Measurements for Any Material

Sensor Head

Square straight type

Appearance

Measuring range

Spot
 diameter

Static
 resolution *

Model

 image

image

18 μm dia.

0.25 μm

ZW-SQ5007 2M

ZW-SQ5007 0.3M

image

40 μm dia.

0.25 μm

ZW-SQ5020 2M

ZW-SQ5020 0.3M

image

60 μm dia.

0.25 μm

ZW-SQ5030 2M

ZW-SQ5030 0.3M

image

80 μm dia.

0.25 μm

ZW-SQ5040 2M

ZW-SQ5040 0.3M

* Values when the sensor controller ZW-5000T is used. 

Square Right-angle type

Appearance

Measuring range

Spot
 diameter

Static
 resolution *

Model

image

image

18 μm dia.

0.25 μm

ZW-SQR5007 2M

ZW-SQR5007 0.3M

image

40 μm dia.

0.25 μm

ZW-SQR5020 2M

ZW-SQR5020 0.3M

image

80 μm dia.

0.25 μm

ZW-SQR5040 2M

ZW-SQR5040 0.3M

* Values when the sensor controller ZW-5000T is used. 

Sensor Controller with EtherCAT

Appearance

Power supply

Output type

Model

image

24VDC

NPN/PNP

ZW-5000T

Cable

Appearance

Item

Cable length

Model

image

Extension Fiber Cable (from Sensor Head to
 Sensor Controller), (Fiber Adapter ZW-XFC2
 is included)

2 m

ZW-XF5002R

5 m

ZW-XF5005R

10 m

ZW-XF5010R

20 m

ZW-XF5020R

30 m

ZW-XF5030R

image

Fiber Adapter (used between Sensor Head
 pre-wired cable and Extension Fiber Cable)

-

ZW-XFC2

Note: Extension Fiber Cable ZW-XF50[][]R can be used with the firmware version 2.100 or later. If you have an old version sensor controller, register as a Sysmac member and download the latest firmware and tools to update your sensor controller. Refer to the Sysmac member registration sheet that is enclosed with the sensor controller for details on member registration and firmware download. 

Common cables

Appearance

Item

Cable length

Model

image

Parallel caable for ZW-5000T
 32-pole (included with Sensor Controller ZW-5000T)

2 m

ZW-XCP2E

image

RS-232C Cable for personal computer

2 m

ZW-XRS2

image

RS-232C Cable for PLC/programmable terminal

2 m

ZW-XPT2

Recommended EtherCAT Communications Cables

Use Straight STP (shielded twisted-pair) cable of category 5 or higher with double shielding (braiding and aluminum foil tape) for EtherCAT. 

Cable with Connectors

Item

Appearance

Recommended
 manufacturer

Cable
 length
 (m) *1

Model

Standard type
 Cable with Connectors on Both Ends
 (RJ45/RJ45)
 Wire Gauge and Number of Pairs:
 AWG26, 4-pair Cable
 Cable Sheath material: LSZH *2
 Cable color: Yellow *3

image

OMRON

0.3

XS6W-6LSZH8SS30CM-Y

0.5

XS6W-6LSZH8SS50CM-Y

1

XS6W-6LSZH8SS100CM-Y

2

XS6W-6LSZH8SS200CM-Y

3

XS6W-6LSZH8SS300CM-Y

5

XS6W-6LSZH8SS500CM-Y

Rugged type
 Cable with Connectors on Both Ends
 (RJ45/RJ45)
 Wire Gauge and Number of Pairs:
 AWG22, 2-pair Cable

image

OMRON

0.3

XS5W-T421-AMD-K

0.5

XS5W-T421-BMD-K

1

XS5W-T421-CMD-K

2

XS5W-T421-DMD-K

5

XS5W-T421-GMD-K

10

XS5W-T421-JMD-K

Rugged type
 Cable with Connectors on Both Ends
 (M12 Straight/RJ45)
 Wire Gauge and Number of Pairs:
 AWG22, 2-pair Cable

image

OMRON

0.3

XS5W-T421-AMC-K

0.5

XS5W-T421-BMC-K

1

XS5W-T421-CMC-K

2

XS5W-T421-DMC-K

5

XS5W-T421-GMC-K

10

XS5W-T421-JMC-K

Rugged type
 Cable with Connectors on Both Ends
 (M12 Right-angle/RJ45)
 Wire Gauge and Number of Pairs:
 AWG22, 2-pair Cable

image

OMRON

0.3

XS5W-T422-AMC-K

0.5

XS5W-T422-BMC-K

1

XS5W-T422-CMC-K

2

XS5W-T422-DMC-K

5

XS5W-T422-GMC-K

10

XS5W-T422-JMC-K

Note: For details, refer to Cat.No.G019.
 1. Standard type cables length 0.2, 0.3, 0.5, 1, 1.5, 2, 3, 5, 7.5, 10, 15 and 20m are available.
       Rugged type cables length 0.3, 0.5, 1, 2, 3, 5, 10 and 15m are available.
 2. The lineup features Low Smoke Zero Halogen cables for in-cabinet use and PUR cables for out-of-cabinet use.
 3. Cables colors are available in blue, yellow, or Green 

Cables / Connectors

Wire Gauge and Number of Pairs: AWG24, 4-pair Cable

Item

Appearance

Recommended manufacturer

Model

Cables

Hitachi Metals, Ltd.

NETSTAR-C5E SAB 0.5 × 4P CP *

Kuramo Electric Co.

KETH-SB *

RJ45 Connectors

Panduit Corporation

MPS588-C *

* We recommend to use above cable and connector together. 

Wire Gauge and Number of Pairs: AWG22, 2-pair Cable

Item

Appearance

Recommended manufacturer

Model

Cables

Kuramo Electric Co.

KETH-PSB-OMR *

JMACS Japan Co.,Ltd.

PNET/B *

RJ45 Assembly Connector

image

OMRON

XS6G-T421-1 *

Note: Connect both ends of cable shielded wires to the connector hoods.        
 * We recommend to use above cable and connector together. 

Industrial switching hubs for Ethernet

Appearance

Number of ports

Current consumption

Model

image

5

0.07A

W4S1-05D

Note: Industrial switching hubs are cannot be used for EtherCAT. 

EtherCAT junction slaves

Appearance

Number
 of ports

Power supply voltage

Current consumption

Model

image

3

20.4 to 28.8 VDC
 (24 VDC 15 to 20%)

0.08A

GX-JC03

image

6

0.17A

GX-JC06

Note: 1. Please do not connect EtherCAT junction slave with OMRON position control unit, Model CJ1W-NC[]81/[]82.
2. EtherCAT junction slaves cannot be used for EtherNet/IPTM and Ethernet. 

Automation Software Sysmac Studio                                                          

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually.
 Each model of licenses does not include DVD.
 

Item

Specifications

Model

Stand-
 ards


Number of
 licenses

Media

Sysmac Studio
 Standard Edition
 Ver.1[][] *3

The Sysmac Studio is the software that
 provides an integrated environment for
 setting, programming, debugging and
 maintenance of machine automation
 controllers including the NJ/NX-series
 CPU Units, NY-series Industrial PC,
 EtherCat Slave, and the HMI.
 Sysmac Studio runs on the following OS.
 Windows 7 (32-bit/64-bit version)/
 Windows 8 (32-bit/64-bit version)/
 Windows 8.1 (32-bit/64-bit version)/
 Windows 10 (32-bit/64-bit version)/
 Windows 11 (64-bit version) *1
 This software provides functions of the
 Measurement Sensor Edition. Refer to
 your OMRON website for details.

⎯ 
 (Media only)

Sysmac
 Studio
 (32bit)
 DVD

SYSMAC-SE200D

⎯ 
 (Media only)

Sysmac
 Studio
 (64bit)
 DVD

SYSMAC-SE200D-64

1 license
 *2

SYSMAC-SE201L

Sysmac Studio
 Measurement
 Sensor Edition
 Ver.1.[][]

Sysmac Studio Measurement Sensor
 Edition is a limited license that provides
 selected functions required for ZW-series
 Displacement Sensor settings.
 Because this product is a license only,
 you need the Sysmac Standard Edition
 DVD media to install it.

1 license

SYSMAC-ME001L

3 license

SYSMAC-ME003L

1. Model "SYSMAC-SE200D-64" runs on Windows 10 (64bit) or higher.
 2. Multiple licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).
 3. ZW-5000T is supported by Sysmac Studio version 1.18 or higher. 

Fiber Cleaner

Item

Recommended
 manufacturer

Model

Applicable Model

Contacts

ZW-5000

Fiber Connector Cleaner *1

OMRON

ZW-XCL

Yes

OMRON

OPTIPOP R1

NTT Advanced
 Technology Corporation

ATC-RE-01

Yes
 (Sensor Head only)

*2

1. Place orders in units of boxes (contacting 10 units).