Smart Sensors (Inductive Displacement Type)
ZX-E
High-accuracy Detection of Metal Workpiece Displacement
Sensors
Sensor Heads
|
Shape |
Dimensions |
Sensing distance |
Resolution *1 |
Model |
|
Cylindrical |
3 dia. x 18 mm |
0.5 mm |
1 μm |
ZX-EDR5T |
|
5.4 dia. x 18 mm |
1 mm |
ZX-ED01T *2 |
||
|
8 dia. x 22 mm |
2 mm |
ZX-ED02T *2 |
||
|
Screw-shaped |
M10 x 22 mm |
ZX-EM02T *2 |
||
|
M18 x 46.3 mm |
7 mm |
ZX-EM07MT *2 |
||
|
Flat |
30 x 14 x 4.8 mm |
4 mm |
ZX-EV04T *2 *3 |
|
|
Heat-resistant, cylindrical |
M12 x 22 mm |
2 mm |
ZX-EM02HT *4 |
1:For an average count of 4,096.
2:Models with Protective Spiral Tubes are also available. Add a suffix of “-S” to the above model numbers when ordering. (Example: ZX-ED01T-S) As for ZX-EM07MT, please mention ZX-EM07M-S when ordering.
For detailed dimensions of the Protective Spiral Tube, refer to the information on the E39-F32A on the OMRON website.
3: Be sure to use ZX-EDA Amplifier Unit version 1,200 or later with the ZX-EV04T.
4: Be sure to use ZX-EDA Amplifier Unit version 1,300 or later with the ZX-EM02HT.
Amplifier Units
|
Appearance |
Power supply |
Output type |
Model |
|
|
DC |
NPN |
ZX-EDA11 2M |
|
PNP |
ZX-EDA41 2M |
Note: Compatible connection with the Sensor Head.
Accessories (Order Separately)
Calculating Unit
|
Appearance |
Model |
|
|
ZX-CAL2 |
Amplifier Mounting Brackets
A ZX-XBE1 is provided with the Sensor. Order an Amplifier Mounting Bracket separately if required.
|
Appearance |
Model |
Remarks |
|
|
ZX-XBE1 |
Attached to each Sensor Head |
|
|
ZX-XBE2 |
For DIN track mounting |
Logging Tool for Personal Computers
|
Appearance |
Name |
Model |
|
|
Communications Interface Unit (RS-232C) |
ZX-SF11 |
|
|
Smart Monitor (Logging Software + Function Setting Software) |
ZX-SW11EV3 *1 |
Setup Tool for Personal Computer
|
Appearance |
Name |
Model |
|
|
Communications Interface Unit (RS-232C) + Smart Monitor Basic *2 |
ZX-SFW11EV3 *1 |
1. The ZX-SFW11EV3 or ZX-SW11EV3 is required to use the Smart Monitor with the ZX-LDA11-N/41-N. Earlier versions cannot be used.
2. The Smart Monitor Basic does not have a logging function. Other than the logging function, the Smart Monitor Basic supports the same functions as the Smart Monitor.
Cables with Connectors on Both Ends (for Extension)*
|
Cable length |
Model |
Quantity |
|
1 m |
ZX-XC1A |
1 |
|
4 m |
ZX-XC4A |
|
|
8 m |
ZX-XC8A |
* Robot cable models are also available. The model numbers are ZX-XC[]R.
Bank Unit
|
Appearance |
Model |
|
|
ZX-SB11 |
