Standards and EC Directives
Conforms to the following EC Directives:
Machinery Directive
EN ISO 14119
EN 60204-1
Certified Standards
Certification body
Standard
File No.
TÜV Rheinland
EN60947-5-1 (certified direct opening)
GS-ET-19
Consult your OMRON representative for details.
UL
UL508
E76675
CSA
CSA C22.2, No.14
LR45746
CQC (CCC)
GB/T 14048.5
Consult your OMRON representative for details.
Certified Standard Ratings
TÜV (EN60947-5-1), CCC (GB/T 14048.5)
Type
Standard model
Indicator model
Utilization category
AC-15
AC-15
Rated operating current (Ie)
3 A
6 A
Rated operating voltage (Ue)
250 V
115 V
Note: Use a 10 A fuse type gI or gG that conforms to IEC60269 as a short-circuit protection device.
UL/CSA (UL508, CSA C22.2 No. 14)
A300
Rated voltage
Carry current
Current (A)
Volt-amperes (VA)
Make
Break
Make
Break
120 VAC
240 VAC
10 A
60
30
6
3
7,200
720
Note: The UL/CSA certified rating for products with indicators (-A) is 6 A/115 VAC.
Characteristics
Interlock type
Type 2 (EN ISO 14119)
Coding level
Low Level coded (EN ISO 14119)
Degree of protection *1
IP67 (EN60947-5-1)
Durability *2
Mechanical
1,000,000 operations min.
Electrical
500,000 operations min. (10 A resistive load at 250 VAC)
Operating speed
0.05 to 0.5 m/s
Operating frequency
30 operations/minute max.
Direct opening force *3
19.61 N min. (EN60947-5-1)
Direct opening travel *3
20 mm min. (EN60947-5-1)
Holding force (Fzh)
700 N min. (GS-ET-19)
Contact resistance
50 max.
Rated insulation voltage (Ui)
300 V (EN60947-5-1)
Rated frequency
50/60 Hz
Protection against electric shock
Class I (with ground terminal)
Pollution degree (operating environment)
3 (EN60947-5-1)
Impulse withstand
voltage (
Uimp)
(EN60947-5-1)
Between terminals of same
polarity
4 kV
Between terminals of
different polarity
Between each terminal and
ground
Between solenoid and ground
2.5 kV
Insulation resistance
100 MΩ min. (at 500 VDC)
Contact gap
2 × 2 mm min.
Vibration resistance
Malfunction
10 to 55 Hz, 0.35 mm single amplitude
Shock resistance
Destruction
1,000 m/s2 min.
Malfunction
300 m/s2 min.
Conditional short-circuit current
100 A (EN60947-5-1)
Conventional enclosed thermal current (Ithe)
10 A (EN60947-5-1)
Ambient operating temperature
-10 to 55°C (with no icing)
Ambient operating humidity
95% max.
Weight
Approx. 800 g
Note: The above values are initial values.
*1. The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing properties are sufficient for the operating conditions and environment beforehand. Although the switch box is protected from dust, oil or water penetration, do not use the D4BL in places where dust, oil, water, or chemicals may enter through the key hole on the head, otherwise Switch damage or malfunctioning may occur.

*2. The durability is for an ambient temperature of 5 to 35°C and an ambient humidity of 40% to 70%.

*3. These figures are minimum requirements for safe operation.
Solenoid Coil Characteristics
Type
24 VDC mechanical lock models
24 VDC solenoid lock models
Rated operating voltage
24 VDC (+10%, -15%) (100% ED)
Current consumption
Approx. 300 mA
Insulation class
Class B (130°C or less)
Indicator Characteristics
Rated voltage
10 to 115 VAC/VDC
Current leakage
Approx. 1 mA
Color (LED)
Orange, green