Capacitive sensor
Capanivo® - CN 4050
Application area
The capacitive point level sensor Capanivo® CN 4050 is used in storage and process vessels as a full detector in all bulk solids from a DK value of 1.6. The measuring probe can be flexibly adjusted up to a length of 6000 mm and puts the switching point where the application needs it. In addition, this probe extension with expanded cable is the basis for beneficial effects, if lateral forces act on the extension.
Technical Data
| Measurement principle | Capacitive |
|---|---|
| Measuring task | Point level measurement |
| Version | Cable extension |
| Medium | Solids |
| Mounting position |
|
| Ambient temperature | -20°C … +60°C (-4°F … +140°F) |
| Process temperature | -30°C … +80°C (-22°F … +176°F) |
| Process pressure | -1 bar … +6 bar (-14.5 psi … +87 psi) |
| Minimum sensitivity | DK ≥ 1.6 |
| Housing type | standard |
| Housing material |
|
| Housing protection rating | IP66 |
| Threaded connection | ≥ G 1 1/2″ |
| Flange connection | — |
| Hygienic fittings | — |
| Wetted materials |
|
| Mechanical load | 4 kN |
| Accuracy | — |
| Min. immersion length | 380 mm (15″) |
| Max. immersion length | 6 m (19.82′) |
| Power supply |
|
| Signal output |
|
| Approvals |
|
| Explosion protection | Dust Ignitionproof (Ex t) |
| Hygienic / Pharma | — |
| Ship approval | — |
| Overfill protection | — |
| SIL qualification | — |
| Further approvals | — |
| User Interface | Jumper |
| Optical indicator | — |
| Adjustment possibility |
|