IoT Status Monitoring Amplifier
E9NC-AA / VA
IoT Status Monitoring Amplifiers for General-purpose Analog Outputs Are Connectable to Various Sensors
Amplifier unit
|
Type |
Appearance |
Connection method |
Output |
Model |
|
|
NPN output |
PNP output |
||||
|
Current input |
|
Connector for Sensor |
2 outputs |
E9NC-AA0 |
|
|
|
Connector for Sensor |
1 output |
E9NC-AA10 2M |
E9NC-AA40 2M |
|
|
Voltage input |
|
Connector for Sensor |
2 outputs |
E9NC-VA0 |
|
|
|
Connector for Sensor |
1 output |
E9NC-VA10 2M |
E9NC-VA40 2M |
|
* A Sensor Communications Unit is required if you want to use the Amplifier Unit on a network.
Accessories (Sold Separately)
DIN Track
A DIN Track is not provided with the Fiber Amplifier Unit. It must be ordered separately as required.
|
Appearance |
Type |
Model |
Quantity |
|
|
Shallow type, total length: 1 m |
PFP-100N |
1 |
|
Shallow type, total length: 0.5 m |
PFP-50N |
||
|
Deep type, total length: 1 m |
PFP-100N2 |
Note: For details, refer to DIN Track on PFP-[] which can be accessed from your OMRON website.
End Plate
Two End Plates (PFP-M) are provided with the Sensor Communications Unit.
End Plates (PFP-M and E39-EP1) are not provided with the Amplifier Unit. They must be ordered separately as required.
|
Appearance |
Model |
Quantity |
Applicable Amplifier Unit |
|
|
PFP-M |
1 |
E9NC-AA0 |
|
|
E39-EP1 |
1 |
E9NC-AA10 |
Related products
Sensor Communications unit
|
Type |
Appearance |
Model |
|
EtherCAT |
|
E3NW-ECT |
|
Sensor Communications |
|
E3NW-CCL |
|
Distributed Sensor Unit * |
|
E3NW-DS |
Refer to your OMRON website for details.
* The Distributed Sensor Unit can be connected to any of the Sensor Communications Units.
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
CC-Link is a registered trademark of Mitsubishi Electric Corporation. The trademark is managed by the CC-Link Partner Association.