Photomicro Sensors Accessories
EE-[]
Connectors and Connector Hold-down Clips
Accessories (Order Separately)
Connectors and Connector Hold-down Clips
|
Applicable Sensor models |
||||
|
Type |
Cable length |
Model |
Remarks |
|
|
Connector |
EE-1001 |
|||
|
EE-1001-1 |
L terminal and positive (+) terminal are already |
|||
|
EE-1009 *1 |
||||
|
Connector |
Connector |
1 m |
EE-1006 1M |
|
|
EE-1010 1M *1 |
||||
|
2 m |
EE-1006 2M |
4 conductors |
||
|
EE-1006D |
3 conductors |
|||
|
EE-1006L |
2 conductors |
|||
|
EE-1010 2M *1 |
||||
|
Connector |
1 m |
EE-1010-R 1M *1 |
||
|
2 m |
EE-1010-R 2M*1 |
|||
|
NPN/PNP Conversion |
0.46 m |
EE-2002 |
||
|
Connector Hold-down Clip |
EE-1006A |
For EE-1006, EE-SX670[], 470, EE-SY671, and |
||
|
Connector |
Case (housing) |
EE-1006H |
100 per carton |
|
|
Dispersion Pins |
EE-1006C |
500 per carton |
||
|
Special Crimping Tool |
EE-1006T |
Appearance |
||
1. EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the Connector from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism prevents the Connector from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled.
2. The case (housing) and dispersion pins (for hand-crimping) for EE-1006 Connectors can be ordered separately. Use the EE-1006T Special Crimping Tool to prepare the Connector.
|
Applicable Sensor models |
||||
|
Item |
Cable length |
Model |
Remarks |
|
|
Connector with Cable |
1 m |
EE-1013 1M |
||
|
Applicable Sensor models |
||||
|
Item |
Cable length |
Model |
Remarks |
|
|
Connector |
EE-1002 |
|||
|
Connector |
Connector with Cable |
1 m |
EE-1003 |
|
|
NPN/PNP Conversion Connector |
0.46 m (total length) |
EE-2001 |
||
|
Connector Hold-down Clip |
EE-1003A |
For EE-1003 only. |
||