Product Category

Sensors

Photomicro sensor

Peripheral Devices

EE-[]

Photomicro Sensors Accessories

EE-[]

Connectors and Connector Hold-down Clips

Line Up
Specification

Product

Connector
 *1 *4

Connector
 with Cable
 *1

Connector
 with Robot
 Cable *1

Connector
 *4

Connector
 (short-
 circuited
 between
 positive (+)
 and L ter-
 minals) *2 *4

Connector
 with Cable

Model

EE-1009

EE-1010

EE-1010-R

EE-1001

EE-1001-1

EE-1006

Appearance

 image

image

image

image

image

image

Contact resistance

20 mΩ max.
 (at 20 mV max., 100 mA max.)

15 mΩ max. (at 100 VDC max.)

10 mΩ max.
 (100 VDC max.)

Insertion/removal
 durability *3

50 times min.

---

Insertion strength

No. of poles ✕ 6 N max.

68.6 N max.

50 N max.

Surplus strength
 (housing holding
 strength)

No. of poles ✕ 0.4 N max.

---

20 N max.

Standard cable length

---

1 m, 2 m

---

1 m, 2 m

Lock strength *3

No. of poles ✕ 29 N min.

---

Ambient humidity

- 10 to +60 °C

- 10 to +75 °C

- 10 to 60 °C

Material

Housing

Polybutylene phthalate (PBT)

Contact

Phosphor bronze

Applicable
 Photomicrosensors

EE-SX67[] (A, P, R) (Connector Models only), EE-SX47[], EE-SY67[], EE-SPY31[]/41[],
 EE-SPX303N/403N, EE-SPW311/411

Product

Connector *4

Connector
 with Cable

Connector
 with Cable

Connector with
 Robot Cable

Connector
 with Cable

Connector with
 Robot Cable

Model

EE-1002

EE-1003

EE-1013

EE-1016-R

EE-1017

EE-1017-R

Appearance

image

image

image

image

image

Contact resistance

10 mΩ max.
 (at 10 mADC
 and 1 ADC)

20 mΩ max. (at minute
 current of 1 kHz and
 500 VDC)

25 mΩ max.
 (at 10 mA DC and 20 mV max.)

Insertion strength

20 N max.

23.5 N max.

40 N max.

20 N max.

Surplus strength
 (housing holding
 strength)

15 N max. (initial)
 10 N max. (ten
 times)

3.5 N max.

10 N max.

15 N min.

1.5 N min.

Cable length

---

1 m

2 m

1 m, 3 m

Ambient humidity

-10 to +75°C

-10 to +60°C

-10 to +55°C

-25 to +85°C

-10 to +60°C

Material

Housing

Nylon

Contact

Phosphor bronze (solder plating)

Applicable
 Photomicrosensors

EE-SPX301/401,
 EE-SPY30[]/40[],
 EE-SPZ301-A/401-A

EE-SPX74[]/84[]

EE-SX95[]-C1J-R

EE-SX97[]C1,
 EE-SX97[]P-C1

image

1. The Connector has a built-in locking mechanism. To remove the Connector from the Sensor,
        grip the top and bottom of the Connector housing, as shown in the following diagram, and
        then pull out the Connector.
 2. EE-SX67[] and EE-SY67[] are the best used in the light-ON state.
 3. The insertion/removal durability and lock strength apply only to the lock mechanism.
        They do not apply to the EE-1001, EE-1001-1, and EE-1006, which do not have lock
        mechanisms.
 4. Do not store the type EE-1009, EE-1001, EE-1001-1 and EE-1002 under the following
        conditions since their terminals may discolor.
        (1) In the place exposed to the direct sunlight, the high temperature or high humidity.