Slim I/O Relay
G2RV-ST
Slim I/O relay realizes space saving thanks to high-density mounting and ultra-slim body
Ratings
Coil ratings
Rated input voltage | Rated current | Must operate voltage | Must release voltage | Power consumption | Maximum allowable voltage | |||
AC | DC | Percentage of the rated voltage | AC (VA) | DC (mW) | Percentage of the rated voltage | |||
50 Hz | 60 Hz | |||||||
12 VDC | - | - | 27.9 mA | 80% max.* | 10% min. | - | Approx. 300 mW | 110% |
24 VDC | - | - | 13.5 mA | - | Approx. 300 mW | |||
24 VAC/VDC | 13.7 mA | 14.9 mA | 12.6 mA | Approx. 0.4 VA | Approx. 300 mW | |||
48 VAC/VDC | 5.9 mA | 6.4 mA | 5.4 mA | Approx. 0.3 VA | Approx. 250 mW | |||
100 VAC | 6.8 mA | 7.1 mA | - | Approx. 0.7 VA | - | |||
110 VAC | 6.1 mA | 6.4 mA | - | Approx. 0.7 VA | - | |||
200 VAC | 6.1 mA | 7.3 mA | - | Approx. 1.5 VA | - | |||
230 VAC | 6.8 mA | 8.2 mA | - | Approx. 1.9 VA | - | |||
Note: The operating characteristics are measured at ambient temperature of 23°C.
* Operating voltage will be, for mounting in the upside down direction, 85% max.
(Upside down: Direction in which the mechanical indicator faces down)
* Operating voltage will be, for mounting in the upside down direction, 85% max.
(Upside down: Direction in which the mechanical indicator faces down)
Contact ratings
Item | Standard (G2RV-ST700, 500, 701, 501) | For microloads (G2RV-ST700-AP, 500-AP) *2 | |
Contact configuration | SPDT | ||
Load | Resistive load (cosφ=1) | Inductive load (cosφ=0.4, L/R=7ms) | Resistive load (cosφ=1) |
Rated load | 6 A at 250 VAC 6 A at 30 VDC | 2.5 A at 250 VAC 2 A at 30 VDC | 50 mA at 30 VAC 50 mA at 36 VDC |
Rated carry current *3 | 6 A | 50 mA | |
Maximum switching voltage | 440 VAC, 125 VDC | 30 VAC, 36 VDC | |
Maximum switching current | 6 A | 50 mA | |
Maximum switching power | 1,500 VA 180 W | 500 VA 60 W | - |
Failure rate P value (reference value) *1 | 10 mA at 5 VDC | 1 mA at 100 mVDC | |
*1. P level: λ60=0.1×10-6/times
This value is the value in switching frequency 120 operations/min.
*2. If the Au plating layer is destroyed, the number will be the same as the standard type.
*3. Please energize under 32A total when use short bar connection.
This value is the value in switching frequency 120 operations/min.
*2. If the Au plating layer is destroyed, the number will be the same as the standard type.
*3. Please energize under 32A total when use short bar connection.
Characteristics
Item | Standard (G2RV-ST700, 500, 701, 501) | For microloads (G2RV-ST700-AP, 500-AP) | |
Contact resistance * | 100 mΩ max. | ||
Operate time * | 20 ms max. | ||
Release time * | AC, AC/DC: 40 ms max. DC: 20 ms max. | ||
Maximum operating frequency | Mechanical: 18,000 operations/h Electrical: 1,800 operations/h (rated load) | ||
Insulation resistance | 1,000 MΩ min. (at 500 VDC) | ||
Dielectric strength | Between coil and contacts: 4,000VAC 50/60 Hz 1 min Contact between the same polarity: 1,000 VAC 50/60 Hz 1 min | ||
Vibration resistance | Destruction: 10 to 55 to 10 Hz, single amplitude 0.50 mm (double amplitude 1.0 mm) Malfunction: 10 to 55 to 10 Hz, single amplitude 0.50 mm (double amplitude 1.0 mm) | ||
Shock resistance | Destruction: 1,000 m/s2 Malfunction: Energized 200m/s2, Non-energized 100m/s2 | ||
Endurance * | Mechanical | 5,000,000 operations min. | |
Electrical | NO contact: 70,000 operations min. NC contact: 50,000 operations min. | 5,000,000 operations min. | |
Ambient operating temperature | Operating: -40 to +55°C (with no icing or condensation) | ||
Ambient operating humidity | Operating: 5 to 85% RH | ||
Weight | Approx. 30 g | ||
Type of interruption | Micro-disconnection | ||
Type of insulation | Basic isolation: Coil-Contact, Live parts-Ground | ||
Pollution degree | 2 | ||
Impulse withstand voltage | 4.0 kV | ||
Test procedure | A (Group mounting) | ||
Categories of environmental protection | RT 1 | ||
Degree of protection by enclosure according to IEC 60529 | IP20 | ||
Contact material | Ag alloy | Ag alloy + Au plating | |
Note: Above values are initial values.
* Value is at ambient temperature of 23°C.
* Value is at ambient temperature of 23°C.
Approved standards
UL (File No.E41515)
Model | Contact form | Operation coil ratings | Contact ratings | Operations |
G2RV-ST series | SPDT | 12 to 48 VDC 24 to 230 VAC | 6 A at 250 VAC (Resistive load) 6 A at 30 VDC (Resistive load) 2 A at 400 VAC (Resistive load)* | 6,000 |
* If the load voltage exceeds 250 VAC, please attach with a spacing of 12 mm min., or use a separate plate (XW5Z-EP12) or 4psc of isolation plate (P2RV-P3.1T).
TÜV (File No.R50559210, EN61810-1)
Model | Contact form | Operation coil ratings | Contact ratings | Operations |
G2RV-ST series | SPDT | 12, 24 VDC 24, 48 VAC/VDC 100, 110, 200, 230 VAC | 6 A at 250 VAC (Resistive load) 6 A at 30 VDC (Resistive load) 2 A at 400 VAC (Resistive load)* | 50,000 50,000 6,000 |
* If the load voltage exceeds 250 VAC, please attach with a spacing of 12 mm min., or use a separate plate (XW5Z-EP12) or 4psc of isolation plate (P2RV-P3.1T).
Lloyd’s (File No.LR23158192TA)
Model | No. of poles | Operation coil ratings | Contact ratings |
G2RV-ST500 G2RV-ST700 | 1c | 12, 24 VDC 24, 48 VAC/VDC 100, 110, 200, 230 VAC | 6 A at 250 VAC (Resistive load) 2.5 A at 250 VAC (PF0.4) 6 A at 30 VDC (Resistive load) 2 A at 30 VDC (L/R=7 ms) |
G2RV-ST501 G2RV-ST701 | 1c | 12, 24 VDC 24 VAC/VDC | 6 A at 250 VAC (Resistive load) 2.5 A at 250 VAC (PF0.4) 6 A at 30 VDC (Resistive load) 2 A at 30 VDC (L/R=7 ms) |
G2RV-ST500-AP G2RV-ST700-AP | 1c | 12, 24 VDC 24, 48 VAC/VDC 100, 110, 200, 230 VAC | 0.05 A at 30 VAC (Resistive load) 0.05 A at 36 VDC (Resistive load) |
PLC interface unit
Ratings / characteristices
Rated voltage | 30 VAC/DC | |
Rated current | 0.5 A/poles, 2 A/unit | |
Ambient operating temperature | -40 to 55°C | |
Vibration resistance | Destruction | 10 to 55 to 10 Hz, single amplitude 0.50 mm (double amplitude 1.0 mm) |
Malfunction | 10 to 55 to 10 Hz, single amplitude 0.50 mm (double amplitude 1.0 mm) | |
Shock resistance | Destruction | 300 m/s2 |
Malfunction | 100 m/s2 | |