Liquid Analysis
Products List
Sodium analyzer CA76NA
Potentiometric system for the monitoring of boiler feedwater, steam, condensate and ion exchangers
Measurement range: 0.1 to 9999 µg/l (ppb) Na
Process temperature: 10 to 40 °C (50 to 104 °F)
Process pressure: 1 to 5 bar (abs) 14.5 to 72.5 psi
Low-range TOC analyzer CA78
Precise online TOC monitoring in power plants and semiconductor production
- Measurement range: 0.5 to 1 000 μg/l (ppb)
- Process temperature: < 50 °C (122 °F)
- Process pressure: max. 0.5 bar (7.25 psi)
- Measuring method:TOC determination by UV digestion and measurement of the differential conductivity
Low-range TOC analyzer CA79
Precise online TOC monitoring in the life sciences industry
- Measurement range: 0.5 to 1 000 μg/l (ppb)
- Process temperature: < 50 °C (122 °F)
- Process pressure: max. 0.5 bar (7.25 psi)
- Measuring method: TOC determination by UV digestion and measurement of the differential conductivity
Water hardness analyzer Liquiline System CA80HA
Colorimetric system for online monitoring of drinking water and process water
Predecessor: Stamolys CA71HA
- Measurement range: 0 to 80 mg/l CaCO3
0 to 80 mg/l with dilution function to maximum 16 to 1600 mg/l CaCO3
Process temperature: 4 to 40 °C (39 to 104 °F)
- Process pressure: Unpressurized
Silica analyzer Liquiline System CA80SI
Colorimetric system for the monitoring of boiler feedwater, steam, condensate and ion exchangers
Predecessor: Stamolys CA71SI
- Measurement range: 0 to 500 µg/l (ppb), 50 to 5000 µg/l (ppb)
- Process temperature: 5 to 45 °C (41 to 113 °F)
- Process pressure: 1 to 5 bar (14.5 to 72.5 psi)
- Measuring method: Comply with standard colorimetric measuring principle – heteropoly blue method
TN analyzer Liquiline System CA80TN
Total nitrogen analyzer for environmental monitoring, industrial and municipal wastewater
- Measurement range: 0 to 10 mg/l N, 0 to 50 mg/l N, 0 to 200 mg/l N
- Process temperature: 4 to 40 °C (39.2 to 104 °F)
- Process pressure: At atmospheric pressure, < 0.2 bar
Digital ammonium and nitrate sensor ISEmax CAS40D
Ion-selective Memosens sensor for the wastewater industry
Predecessor: ISEmax CAS40
- Measurement range: Ammonium: 0.1 to 1000 mg/l (NH4-N)
Nitrate: 0.1 to 1000 mg/l (NO3-N)
Potassium: 1 to 1000 mg/l
Chloride:1 to 1000 mg/l
- Process temperature: 2 °C to 40°C (36 to 100 °F)
- Process pressure: 400 mbar (160 in H2O) max. permitted overpressure
Spectrometer Memosens Wave CAS80E
UV-VIS spectrometer for the water & wastewater industry
- Measurement range: Depending on the path length and the application the measuring range vary: TOCeq: 0 to 400 mg/l
CODeq: 0 to 20 000 mg/l
BODeq: 0 to 5000 mg/l
SAC254: 0 to 1000 /m
TU: 0 to 800 FAU
TSS: 0 to 10 000 mg/l
NO3-N: 0 to 500 mg/l
APHA/Hazen: 0 to 500 Hazen
- Process temperature: 0 to 50°C, 32 to 122 °F
- Process pressure: 0.5 to 10 bar abs., 7.3 to 145 psi
- Measuring method: UV/VIS Absorbance at 200 to 800 nm
Sample preparation Stamoclean CAT411
Self-cleaning crossflow filter for pressurized pipe sampling
- Process temperature: 5 to 50 °C (41 to 122 °F)
- Process pressure: 0.2 to 1 bar (3 to 15 psi)
Sample preparation Liquiline System CAT810
Self-cleaning backflush filter for sampling from pressurized pipes and outlets
Predecessor: Stamoclean CAT221
- Process temperature: 4 to 40 °C (39 to 104 °F)
- Process pressure: 1.5 to 4.0 bar (21.76 to 58.01 psi)
- For optional automatic cleaning: 2.0 to 5.0 bar (29.0 to 72.5 psi); but at least 0.5 bar (7.3 psi) > process pressure
Sample preparation Liquiline System CAT820
In-situ filtration system for sampling in wastewater treatment plants and surface waters
Predecessor: Stamoclean CAT430
- Process temperature: 4 to 40 °C (39 to 104 °F)
- Process pressure: Unpressurized
Sample preparation Liquiline System CAT860
Robust in-situ filtration system for sampling from inlets of wastewater treatment plants
- Process temperature: 4 to 40 °C (39 to 104 °F)
- Process pressure: Unpressurized
Flow assembly CAV01
Flow assembly for optical, chemical-free concentration measurement in drinking water and process water
- Process temperature: 0 to 50°C, 32 to 122 °F
- Process pressure: 0 to 6 bar abs. 0 to 87 psi
Flow assembly Flowfit CCA250
Products
Liquid Analysis
Assembly for chlorine measurement in drinking, industrial, and pool water
Successor: Flowfit CYA27
Hide details
- Process temperature: max. 45°C
- Process pressure: max. 4bar
Disinfection transmitter Liquisys CCM223
Compact panel device for the water, wastewater, food and power industries
Predecessor: CCM120, CCM121
- Input: Chor / Chlordioxide and pH/ORP Sensor.
- Output / communication: – Chlor/Chlordioxid, pH, Temperatur : 0/4-20mA- Profibus- Hart + 0/4-20mA
Disinfection transmitter Liquisys CCM253
Compact field device for the water, wastewater, food and power industries
Predecessor: CCM130, CCM140, CCM141S, CCM151, CCM141
- Input: Chorine / Chlordioxide and pH/ORP Sensor.
- Output / communication: – Chlorine/Chlordioxid, pH, Temperature : 0/4-20mA- Profibus- Hart + 0/4-20mA
Analog total chlorine sensor CCS120
Disinfection sensor for all water and wastewater applications
- Measurement range: 0,1 – 10ppm total chlorine; pH 6,5 – 9,5
- Process temperature: 5°C – 45°C
- Process pressure: 0bar – 3bar
CCS50: Analog chlorine dioxide sensor
Sensor for water, process water and utilities in all industries
Predecessor: Chlorine dioxide CCS240, Trace Chlorine dioxide CCS241
Hide details
- Measurement range: Trace: 0 to 5 mg/l ClO2, Standard: 0 to 20 mg/l ClO2
- Process temperature: 0 to 55 °C (32 to 130°F), non-freezing
- Process pressure: Max.1 bar (max. 14.5 psi)
- Measuring method: Closed, membrane covered measuring cell, Reduction of chlordioxide at the cathode
Digital chlorine dioxide sensor Memosens CCS50E
Memosens sensor for drinking water, process water and multi-industry utilities
- Measurement range: Trace: 0 to 5 mg/l ClO2, Standard: 0 to 20 mg/l ClO2, High: 0 to 200 mg/l ClO2
- Process temperature: 0 to 55 °C , non-freezing (32 to 130 °F)
- Process pressure: Max. 2 bar abs (Max. 29 psi abs)
Digital free chlorine sensor Memosens CCS51E
Memosens sensor for drinking water, pool and process water as well as utilities in all industries
- Measurement range: Trace: 0 to 5 mg/l HOCl, Standard: 0 to 20 mg/l HOCl, High: 0 to 200 mg/l HOCl
- Process temperature: 0 to 55 °C (32 to 130 °F), non-freezing
- Process pressure: Max. 1 bar (max. 14.5 psi)
- Measuring method: Closed, membrane covered measuring cell, Reduction of free chlorine at the cathode
Digital free bromine sensor Memosens CCS55E
Memosens sensor for seawater applications and process water
- Measurement range: Trace: 0 … 5 mg/l HOBr, Standard: 0 … 20 mg/l HOBr, High: 0 … 200 mg/l HOBr
- Process temperature: +0…55 °C (32 … 130°F), non-freezing
- Process pressure: Max. 1 bar (max. 14.5 psi)
Digital ozone sensor Memosens CCS58E
Memosens sensor for wastewater, process water in all industries and drinking water
- Measurement range: 0 to 2 mg/l
- Process temperature: +0 to 45 °C (32 to 110 °F), non freezing
- Process pressure: 1 bar (14.5 psi), 2 bar (29 psi) absolute
- Measuring method: – closed 2 electrode system
– conversion of ozone into a signal current in nA
– signal current is proportional to the concentration of ozone
– the measurement is not pH dependent
Conductivity assembly Dipfit CLA111
Immersion assembly for water, wastewater and utilities
- Process temperature: Max. 80 °C (176 °F)
- Process pressure: Max. 4 bar at 20 °C, (Max. 58 psi at 68 °F)
Conductivity assembly Dipfit CLA140
Immersion assembly for the chemical and the pulp & paper industry
Predecessor: CLA110
- Process temperature: max. 150°C, (302°F)
- Process pressure: max. 10 bar, (145 psi)
Conductivity compact device Smartec CLD132
Inductive conductivity measuring system for applications with fast temperature changes
Predecessor: CLD130, CLS51
- Measurement range: 100 µS/cm – 2000 mS/cm
- Process temperature: max. 140°C (max. 30 min.), 284°F (max. 30 min.)
- Process pressure: max. 12 bar (90°C), (174 psi(194°F))
Digital conductivity sensor Memosens CLL47E
Memosens 2.0 four-electrode sensor for laboratory and sample measurement in the field with wide measuring range
- Measurement range: 5 μS/cm to 200 mS/cm
- Process temperature: 0 to 100 °C (32 to 212 °F)
- Process pressure: 1 bar, not intended for continuous measurement in process
Conductivity transmitter Liquisys CLM223
Compact panel device for all industries
Predecessor: CLM121, CLM230, CLM210, CLM170, CLM140, CLM120, CLM220, CLM221
- Input: 1-channel transmitter
- Output / communication: 0/4-20 mA, Hart, Profibus.
- Ingress protection: IP65
Conductivity transmitter Liquisys CLM253
Compact field device for all industries
Predecessor: CLM141S, CLM141, CLM170, CLM130, CLM240, CLM151, CLM252
- Input: One-channel transmitter
- Output / communication: 0/4-20mA, Hart, Profibus.
- Ingress protection: IP65
Analog conductivity sensor Condumax CLS12
Conductive conductivity sensor for high temperature applications in the power & energy industry
Predecessor: CLS11
- Measurement range: k=0.01: 0 to 20 µS/cm, k= 0.1: 0 to 200 µS/cm
- Process temperature: -30 to 160 °C (-22 to 320 °F)
- Process pressure: Max. 40 bar up to 100 °C (max. 580 psi up to 212 °F) without CLA 751 flow chamber, Max. 12 bar up to 150 °C (max. 174 psi up to 302 °F) with CLA 751 flow chamber
Analog conductivity sensor Condumax CLS13
Conductive conductivity sensor for high temperature applications in the power & energy industry
- Measurement range: k=0,01: 0-20,0 µS/cm, k=0,1: 0-200,0 µS/cm
- Process temperature: max. 250 °C (482 °F)
- Process pressure: max. 40 bar (580 psi)