Model: KT5W-2P1116
Brand: SICK
SICK CONTRAST SENSOR KT5W-2P1116
| Features | |
|---|---|
| Dimensions (W x H x D) | 30.4 mm x 53 mm x 80 mm |
| Sensing distance | ≤ 10 mm ¹⁾ |
| Housing design | Rectangular |
| Light source | LED, RGB ²⁾ |
| Wavelength | 470 nm, 525 nm, 640 nm |
| Light emission | Long and short side of housing, exchangeable |
| Light spot size | 1.2 mm x 4.2 mm |
| Light spot direction | Vertical ³⁾ |
| Adjustment | Teach-in button |
| Teach-in mode | Static 2-point teach-in |
1) From leading edge of lens. 2) Average service life: 100,000 h at TU = +25 °C. 3) In relation to long side of housing.
| Mechanics/Electronics | |
|---|---|
| Supply voltage | 10 V DC … 30 V DC¹⁾ |
| Ripple | ≤ 5 Vpp²⁾ |
| Current consumption | < 80 mA³⁾ |
| Switching frequency | 10 kHz⁴⁾ |
| Response time | 50 µs⁵⁾ |
| Switching output | PNP |
| Switching output (voltage) | PNP: HIGH = UV ≤ 2 V / LOW approx. 0 V |
| Output current Imax. | 100 mA⁶⁾ |
| Input, teach-in (ET) | PNP Teach: U = 10 V … < UV Run: U < 2 V |
| Retention time (ET) | 25 ms, non-volatile memory |
| Connection type | Male connector M12, 5-pin |
| Protection class | II⁷⁾ |
| Circuit protection | UV connections, reverse polarity protected |
| Output Q | Short-circuit protected |
| Interference pulse suppression | Yes |
| Enclosure rating | IP67 |
| Weight | 400 g |
| Housing material | Metal, zinc diecast |
1) Limit values when operated in short-circuit protected network: max. 8 A. 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) With light/dark ratio 1:1. 5) Signal transit time with resistive load. 6) Short-circuit-proof. 7) Reference voltage DC 50 V.
| Ambient Data | |
|---|---|
| Ambient operating temperature | –10 °C … +55 °C |
| Ambient temperature, storage | –25 °C … +75 °C |
| Shock load | According to IEC 60068 |