Product Category

Ultra-long Sensing-distance Proximity Sensor


Detection Distance of 100 mm for Both Ferrous and Non-ferrous Substances.

Output specifications

Current output


Sensing distance

100 mm ±10%

Set distance

0 to 80 mm

Differential travel

15% max. of sensing distance

Detectable object

Ferrous metal and non-ferrous metal

Standard sensing object

Iron, 200 × 200 × 1 mm

Response time

100 ms max.

Power supply voltage
 (operating voltage range)

10 to 30 VDC including 10% ripple (p-p)

Current consumption

40 mA DC max.

Control output

200 mA DC max. (residual voltage: 1 V max.)


Operation indicator (red)

Operation mode
 (with sensing object approaching)

NO; For details, refer to Datasheet

Protection circuits

Reverse polarity protection, Surge suppressor

Ambient temperature range

Operating/Storage: -25 to 55°C (with no icing or condensation)

Ambient humidity range

Operating/Storage: 35% to 95% (with no condensation)

Temperature influence

±30% max. of sensing distance at 20°C in the temperature range of -10 to 40°C

Voltage influence

±5% max. of sensing distance at rated voltage in rated voltage ±10% range

Insulation resistance

5 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

500 VAC, 50/60 Hz for 1 min between current-carrying parts and case

Vibration resistance

Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance

Destruction: 200 m/s2 10 times each in X, Y, and Z directions

Degree of protection

IP66 (IEC)

Connection method

Pre-wired Models (Standard cable length: 1m)

Weight (packed state)

Approx. 1.5 kg


Case: Aluminum die-cast, Sensing surface: Epoxy resin


Instruction manual