Ratings

Rated
 voltage (V)

Non-inductive load (A)

Inductive load (A)

Resistive load

Lamp load

Inductive load

Motor load

NC

NO

NC

NO

NC

NO

NC

NO

125 AC
 250

10
 10

2
 1.5

10
 10

3
 2

8 DC
 14
 30
 125
 250

10
 10
 6
 0.6
 0.3

2
 3
 3
 0.1
 0.05

6
 6
 4
 0.6
 0.3

6
 6
 4
 0.1
 0.05

Inrush current

NC

24 A max.

NO

24 A max.













Note: 1. The above values are continuous currents.
            2. Inductive loads have a power factor of 0.4 or higher (AC) or a time constant of 7 ms or lower (DC).
            3. Lamp loads have an inrush current of 10 times the steady-state current.
            4. Motor loads have an inrush current of 6 times the steady-state current.

Characteristics

Degree of protection

IP60

Durability *

Mechanical

1,500,000 operations min.

Electrical

300,000 operations min. (10 A at 250 VAC, resistive load)

Operating speed

Sealed plunger: 0.1 mm/s to 0.5 m/s
 Cam arm: 0.5 mm/s to 0.5 m/s
 Cam roller arm: 0.5 mm/s to 0.5 m/s

Allowable operating
 frequency

Mechanical

120 operations/min.

Electrical

60 operations/min.

Rated frequency

50/60 Hz

Insulation resistance

100 MΩ min. (at 500 VDC)

Contact resistance

15 mΩ max. (initial value)

Dielectric strength

Between terminals of the
 same polarity

1,000 VAC at 50/60 Hz for 1 minute

Between each terminal and
 non-current-carrying parts

1,500 VAC, 50/60 Hz for 1 minute

Vibration resistance

Malfunction: 10 to 55 Hz, 1.5-mm double amplitude

Shock resistance

Destruction: 1,000 m/s2 max., Malfunction: 300 m/s2 max.

Ambient operating temperature

-10°C to 80°C (with no icing)

Ambient operating humidity

35% to 95%

Weight

Approx. 120 to 170 g

Note: The above values are initial values.
 * The values are calculated at an operating temperature of 5°C to 35°C and an operating humidity of 40% to 70%. Contact your OMRON sales representative for more detailed information on other operating environments.

Engineering Data

Switch with Cam Roller Arm Electrical Durability Graph 

 image