DC 3-Wire

PREMIUM Model

DC 3-wire (Quadruple/Triple distance model)

Shielded

Types

Quadruple distance model

Size

M8

M12

M18

M30

Model

E2E-X4[]8

E2E-X9[]12

E2E-X14[]18

E2E-X23[]30

Sensing distance

4 mm±10%

9 mm±10%

14 mm±10%

23 mm±10%

Setting distance

0 to 3 mm

0 to 6.8 mm

0 to 10.6 mm

0 to 17.6 mm

Differential travel

15% max. of sensing distance

Detectable object

Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.)

Standard sensing object

Iron,
 12 × 12 × 1 mm

Iron,
 27 × 27 × 1 mm

Iron,
 42 × 42 × 1 mm

Iron,
 69 × 69 × 1 mm

Response frequency *1

700 Hz

700 Hz

350 Hz

200 Hz

Power supply voltage

10 to 30 VDC (including 10% ripple (p-p)), Class 2

Current consumption

1-output models: 16 mA max.

Output configuration

B[] Models: PNP open collector, C[] Models: NPN open collector

Operation mode
 (with sensing object
 approaching)

1-output models (B1, C1): NO (Normally open),
 1-output models (B2, C2): NC (Normally closed)

Control
 output

Load current

1-output models:
 10 to 30 VDC, Class 2, 50 mA max.

Residual voltage

1-output models:
 2 V max. (Load current: 50 mA, Cable length: 2 m)

Indicator *2

In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
 communication indicator (green, not lit)
 In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and
 communication indicator (green, blinking at 1 s intervals)

Protection circuits

Power supply reverse polarity protection, Surge suppressor, Output short-circuit
 protection, Output reverse polarity protection

Ambient temperature range

Operating: -25 to 60°C
 Storage: -25 to 70°C
 (with no icing or
 condensation)

Operating/Storage: -25 to 70°C (with no icing or
 condensation)

Ambient humidity range

Operating/Storage: 35% to 95% (with no condensation)

Temperature influence

-15% to 25% max. of
 sensing distance at
 23°C in the
 temperature range of
 -25 to 60°C

±15% max. of sensing distance at 23°C in the temperature
 range of -25 to 70°C

Voltage influence

±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance
 (destruction)

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance
 (destruction)

500 m/s2 10 times
 each in X, Y, and Z
 directions

1,000 m/s2 10 times each in X, Y, and Z directions

Degree of protection

Pre-wired Models, Pre-wired Connector Models: IEC 60529: IP67, ISO 20653 (old
 standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's
 Oil-resistant Component Evaluation Standards *3 (Cutting oil type: specified in JIS K
 2241: 2000; Temperature: 35°C max.)
 Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART9):
 IP69K

Connection method

Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard
 cable length: 0.3 m) and Connector Models (M12 Connector, M8 (4-pin) Connector
 and M8 (3-pin) Connector)

Weight*4
 (packed
 state)

Pre-wired

Approx. 85 g

Approx. 95 g

Approx. 180 g

Approx. 260 g

M12 Pre-wired
 Smartclick
 Connector

Approx. 55 g

Approx. 70 g

Approx. 115 g

Approx. 200 g

Connector

Approx. 40 g
 (M8/M12
 Connector)

Approx. 55 g

Approx. 95 g

Approx. 180 g

Materials

Case

Nickel-plated brass

Sensing surface

Polybutylene terephthalat (PBT)

Clamping nuts

Nickel-plated brass

Toothed washers

Zinc-plated iron

Cable

Vinyl chloride (PVC)

Main IO-Link functions*2

Operation mode switching between NO and NC, self diagnosis enabling, excessive
 proximity judgment distance selecting, timer function of the control output and timer
 time selecting, instability output (IO-Link mode) ON delay timer time selecting
 function, monitor output, operating hours read-out, readout of the sensor internal
 temperature, and initial reset

IO-Link
 Commun-
 ication
 specifica-
 tions *2

IO-Link
 specification

Ver 1.1

Baud rate

COM2 (38.4 kbps), COM3 (230.4 kbps)

Data length

PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)

Minimum cycle
 time

COM2: 2.3 ms, COM3: 0.4 ms

Accessories

Instruction manual, Clamping nuts, Toothed washer

Types

Triple distance model

Size

M8

M12

M18

M30

Model

E2E-X3[]8

E2E-X6[]12

E2E-X12[]18

E2E-X22[]30

Sensing distance

3 mm±10%

6 mm±10%

12 mm±10%

22 mm±10%

Setting distance

0 to 2.4 mm

0 to 4.8 mm

0 to 9.6 mm

0 to 16.8 mm

Differential travel

15% max. of sensing distance

Detectable object

Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.)

Standard sensing object

Iron,
 9 × 9 × 1 mm

Iron,
 18 × 18 × 1 mm

Iron,
 36 × 36 × 1 mm

Iron,
 66 × 66 × 1 mm

Response frequency *1

1,000 Hz

800 Hz

500 Hz

200 Hz

Power supply voltage

10 to 30 VDC (including 10% ripple (p-p)), Class 2

Current consumption

1-output models:
 16 mA max.

1-output models: 16 mA max.,
 2-output models: 20 mA max.

Output configuration

B[] Models: PNP open collector, C[] Models: NPN open collector

Operation mode
 (with sensing object
 approaching)

1-output models (B1,
 C1): NO (Normally open),
 1-output models (B2,
 C2): NC (Normally
 closed)

1-output models (B1, C1): NO (Normally open),
 1-output models (B2, C2): NC (Normally closed),
 2-output models (B3, C3): NO+NC (Normally open, Normally
 closed)

Control
 output

Load current

1-output models:
 10 to 30 VDC, Class 2,
 100 mA max.

1-output models:
 10 to 30 VDC, Class 2, 100 mA max.,
 2-output models:
 10 to 30 VDC, Class 2, 50 mA max.

Residual voltage

1-output models: 2 V
 max. (Load current: 100
 mA, Cable length: 2 m)

1-output models:
 2 V max. (Load current: 100 mA, Cable length: 2 m),
 2-output models:
 2 V max. (Load current: 50 mA, Cable length: 2 m)

Indicator *2

In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
 communication indicator (green, not lit)
 In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and
 communication indicator (green, blinking at 1 s intervals)

Protection circuits

Power supply reverse polarity protection, Surge suppressor, Output short-circuit
 protection, Output reverse polarity protection

Ambient temperature range

Operating/Storage: -25 to 70°C (with no icing or condensation)

Ambient humidity range

Operating/Storage: 35% to 95% (with no condensation)

Temperature influence

±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

Voltage influence

±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance
 (destruction)

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance
 (destruction)

500 m/s2 10 times
 each in X, Y, and Z
 directions

1,000 m/s2 10 times each in X, Y, and Z directions

Degree of protection

Pre-wired Models, Pre-wired Connector Models: IEC 60529: IP67, ISO 20653 (old
 standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's
 Oil-resistant Component Evaluation Standards *3 (Cutting oil type: specified in JIS K
 2241: 2000; Temperature: 35°C max.)
 Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART9):
 IP69K

Connection method

Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard
 cable length: 0.3 m) and Connector Models (M12 Connector, M8 (4-pin) Connector
 and M8 (3-pin) Connector)

Weight*4
 (packed
 state)

Pre-wired

Approx. 85 g

Approx. 95 g

Approx. 180 g

Approx. 260 g

M12 Pre-wired
 Smartclick
 Connector

Approx. 55 g

Approx. 70 g

Approx. 115 g

Approx. 200 g

Connector

Approx. 40 g
 (M8/M12
 Connector)

Approx. 55 g

Approx. 95 g

Approx. 180 g

Materials

Case

Nickel-plated brass

Sensing surface

Polybutylene terephthalat (PBT)

Clamping nuts

Nickel-plated brass

Toothed washers

Zinc-plated iron

Cable

Vinyl chloride (PVC)

Main IO-Link functions*2

Operation mode switching between NO and NC, self diagnosis enabling, excessive
 proximity judgment distance selecting, timer function of the control output and timer
 time selecting, instability output (IO-Link mode) ON delay timer time selecting
 function, monitor output, operating hours read-out, readout of the sensor internal
 temperature, and initial reset

IO-Link
 Commun-
 ication
 specifica-
 tions *2

IO-Link
 specification

Ver 1.1

Baud rate

COM2 (38.4 kbps), COM3 (230.4 kbps)

Data length

PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)

Minimum cycle
 time

COM2: 2.3 ms, COM3: 0.4 ms

Accessories

Instruction manual, Clamping nuts, Toothed washer

1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
 2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
 3. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical value). The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5 NEXT series correctly. The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.
 4. Weight of the standard body-sized model.

DC 3-wire (Quadruple/Triple distance model)

Unshielded

Types

Quadruple distance model

Size

M8

M12

M18

M30

Model

E2E-X8M[]8

E2E-X16M[]12

E2E-X30M[]18

E2E-X50M[]30

Sensing distance

8 mm±10%

16 mm±10%

30 mm±10%

50 mm±10%

Setting distance

0 to 6 mm

0 to 12.2 mm

0 to 23 mm

0 to 38.2 mm

Differential travel

15% max. of sensing distance

Detectable object

Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.)

Standard sensing object

Iron,
 24 × 24 × 1 mm

Iron,
 48 × 48 × 1 mm

Iron,
 90 × 90 × 1 mm

Iron,
 150 × 150 × 1 mm

Response frequency *1

500 Hz

400 Hz

200 Hz

100 Hz

Power supply voltage

10 to 30 VDC (including 10% ripple (p-p)), Class 2

Current consumption

1-output models: 16 mA max.

Output configuration

B[] Models: PNP open collector
 C[] Models: NPN open collector

Operation mode
 (with sensing object
 approaching)

1-output models (B1, C1): NO (Normally open),
 1-output models (B2, C2): NC (Normally closed)

Control
 output

Load current

1-output models:
 10 to 30 VDC, Class 2, 50 mA max.

Residual voltage

1-output models:
 2 V max. (Load current: 50 mA, Cable length: 2 m)

Indicator *2

In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
 communication indicator (green, not lit)
 In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and
 communication indicator (green, blinking at 1 s intervals)

Protection circuits

Power supply reverse polarity protection, Surge suppressor, Output short-circuit
 protection, Output reverse polarity protection

Ambient temperature range

Operating/Storage: -25 to 70°C (with no icing or condensation)

Ambient humidity range

Operating/Storage: 35% to 95% (with no condensation)

Temperature influence

±15% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

Voltage influence

±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance
 (destruction)

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance
 (destruction)

500 m/s2 10 times
 each in X, Y, and Z
 directions

1,000 m/s2 10 times each in X, Y, and Z directions

Degree of protection

Pre-wired Models, Pre-wired Connector Models: IEC 60529:IP67, ISO 20653 (old
 standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's
 Oil-resistant Component Evaluation Standards *3 (Cutting oil type: specified in JIS K
 2241: 2000; Temperature: 35°C max.)
 Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART9):
 IP69K

Connection method

Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
 (Standard cable length: 0.3 m) and Connector Models (M12 Connector, M8 (4-pin)
 Connector and M8 (3-pin) Connector)

Weight*4
 (packed
 state)

Pre-wired

Approx. 85 g

Approx. 95 g

Approx. 190 g

Approx. 310 g

M12 Pre-wired
 Smartclick
 Connector

Approx. 55 g

Approx. 70 g

Approx. 125 g

Approx. 250 g

Connector

Approx. 40 g
 (M8/M12
 Connector)

Approx. 55 g

Approx. 105 g

Approx. 230 g

Materials

Case

Stainless (SUS303)

Nickel-plated brass

Sensing surface

Polybutylene terephthalat (PBT)

Clamping nuts

Nickel-plated brass

Toothed washers

Zinc-plated iron

Cable

Vinyl chloride (PVC)

Main IO-Link functions*2

Operation mode switching between NO and NC, self diagnosis enabling, excessive
 proximity judgment distance selecting, timer function of the control output and timer
 time selecting, instability output (IO-Link mode) ON delay timer time selecting
 function, monitor output, operating hours read-out, readout of the sensor internal
 temperature, and initial reset

IO-Link
 Commun-
 ication
 specifica-
 tions *2

IO-Link
 specification

Ver1.1

Baud rate

COM2 (38.4 kbps), COM3 (230.4 kbps)

Data length

PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)

Minimum cycle
 time

COM2: 2.3 ms, COM3: 0.4 ms

Accessories

Instruction manual, Clamping nuts, Toothed washer

Types

Triple distance model

Size

M8

M12

M18

M30

Model

E2E-X6M[]8

E2E-X10M[]12

E2E-X20M[]18

E2E-X40M[]30

Sensing distance

6 mm±10%

10 mm±10%

20 mm±10%

40 mm±10%

Setting distance

0 to 4.8 mm

0 to 8 mm

0 to 16 mm

0 to 32 mm

Differential travel

15% max. of sensing distance

Detectable object

Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.)

Standard sensing object

Iron,
 18 × 18 × 1 mm

Iron,
 30 × 30 × 1 mm

Iron,
 60 × 60 × 1 mm

Iron,
 120 × 120 × 1 mm

Response frequency *1

800 Hz

400 Hz

200 Hz

100 Hz

Power supply voltage

10 to 30 VDC (including 10% ripple (p-p)), Class 2

Current consumption

1-output models:
 16 mA max.

1-output models: 16 mA max.,
 2-output models: 20 mA max.

Output configuration

B[] Models: PNP open collector
 C[] Models: NPN open collector

Operation mode
 (with sensing object
 approaching)

1-output models (B1,
 C1): NO (Normally
 open),
 1-output models (B2,
 C2): NC (Normally
 closed)

1-output models (B1, C1): NO (Normally open),
 1-output models (B2, C2): NC (Normally closed),
 2-output models (B3, C3):
 NO+NC (Normally open, Normally closed)

Control
 output

Load current

1-output models:
 10 to 30 VDC, Class
 2, 100 mA max.

1-output models: 10 to 30 VDC, Class 2, 100 mA max.,
 2-output models: 10 to 30 VDC, Class 2, 50 mA max.

Residual voltage

1-output models: 2 V
 max. (Load current:
 100 mA, Cable
 length: 2 m)

1-output models:
 2 V max. (Load current: 100 mA, Cable length: 2 m),
 2-output models:
 2 V max. (Load current: 50 mA, Cable length: 2 m)

Indicator *2

In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
 communication indicator (green, not lit)
 In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and
 communication indicator (green, blinking at 1 s intervals)

Protection circuits

Power supply reverse polarity protection, Surge suppressor, Output short-circuit
 protection, Output reverse polarity protection

Ambient temperature range

Operating/Storage: -25 to 70°C (with no icing or condensation)

Ambient humidity range

Operating/Storage: 35% to 95% (with no condensation)

Temperature influence

±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

Voltage influence

±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance
 (destruction)

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance
 (destruction)

500 m/s2 10 times
 each in X, Y, and Z
 directions

1,000 m/s2 10 times each in X, Y, and Z directions

Degree of protection

Pre-wired Models, Pre-wired Connector Models: IEC 60529:IP67, ISO 20653 (old
 standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's
 Oil-resistant Component Evaluation Standards *3 (Cutting oil type: specified in JIS K
 2241: 2000; Temperature: 35°C max.)
 Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART9):
 IP69K

Connection method

Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
 (Standard cable length: 0.3 m) and Connector Models (M12 Connector, M8 (4-pin)
 Connector and M8 (3-pin) Connector)

Weight*4
 (packed
 state)

Pre-wired

Approx. 85 g

Approx. 95 g

Approx. 190 g

Approx. 280 g

M12 Pre-wired
 Smartclick
 Connector

Approx. 55 g

Approx. 70 g

Approx. 125 g

Approx. 220 g

Connector

Approx. 40 g
 (M8/M12
 Connector)

Approx. 55 g

Approx. 105 g

Approx. 200 g

Materials

Case

Stainless (SUS303)

Nickel-plated brass

Sensing surface

Polybutylene terephthalat (PBT)

Clamping nuts

Nickel-plated brass

Toothed washers

Zinc-plated iron

Cable

Vinyl chloride (PVC)

Main IO-Link functions*2

Operation mode switching between NO and NC, self diagnosis enabling, excessive
 proximity judgment distance selecting, timer function of the control output and timer
 time selecting, instability output (IO-Link mode) ON delay timer time selecting
 function, monitor output, operating hours read-out, readout of the sensor internal
 temperature, and initial reset

IO-Link
 Commun-
 ication
 specifica-
 tions *2

IO-Link
 specification

Ver1.1

Baud rate

COM2 (38.4 kbps), COM3 (230.4 kbps)

Data length

PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)

Minimum cycle
 time

COM2: 2.3 ms, COM3: 0.4 ms

Accessories

Instruction manual, Clamping nuts, Toothed washer

1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
 2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
 3. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical value). Actual performance can be expected to decline after two years on average from shipment. The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5 NEXT series correctly. The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.
 4. Weight of the standard body-sized model.

BASIC Model

DC 3-wire (Double/Single distance model)

Shielded

Types

Double distance model

Size

M8

M12

M18

M30

Model

E2E-X2[]8

E2E-X4[]12

E2E-X8[]18

E2E-X15[]30

Sensing distance

2 mm±10%

4 mm±10%

8 mm±10%

15 mm±10%

Setting distance

0 to 1.6 mm

0 to 3.2 mm

0 to 6.4 mm

0 to 12 mm

Differential travel

15% max. of sensing distance

Detectable object

Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.)

Standard sensing object

Iron,
 8 × 8 × 1 mm

Iron,
 12 × 12 × 1 mm

Iron,
 24 × 24 × 1 mm

Iron,
 45 × 45 × 1 mm

Response frequency *1

1,500 Hz

1,000 Hz

500 Hz

250 Hz

Power supply voltage

10 to 30 VDC (including 10% ripple (p-p)), Class 2

Current consumption

1-output models: 16 mA max.
 2-output models: 20 mA max.

Output configuration

B[] Models: PNP open collector
 C[] Models: NPN open collector

Operation mode
 (with sensing object
 approaching)

1-output models (B1, C1): NO (Normally open),
 1-output models (B2, C2): NC (Normally closed),
 2-output models (B3, C3): NO+NC (Normally open, Normally closed) *3

Control
 output

Load current

1-output models:
 10 to 30 VDC, Class 2,
 200 mA max., (-40 to
 70°C), 100 mA max.,
 (70 to 85°C)
 2-output models:
 10 to 30 VDC, Class 2,
 50 mA max.

1-output models:
 10 to 30 VDC, Class 2, 200 mA max.,
 2-output models:
 10 to 30 VDC, Class 2, 100 mA max.

Residual voltage

1-output models:
 2 V max. (Load current:
 200 mA, Cable length:
 2 m),
 2-output models:
 2 V max. (Load current:
 50 mA, Cable length:
 2 m)

1-output models:
 2 V max. (Load current: 200 mA, Cable length: 2 m),
 2-output models:
 2 V max. (Load current: 100 mA, Cable length: 2 m)

Indicator *2

In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
 communication indicator (green, not lit)
 In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and
 communication indicator (green, blinking at 1 s intervals)

Protection circuits

Power supply reverse polarity protection, Surge suppressor, Output short-circuit
 protection, Output reverse polarity protection

Ambient temperature range

Operating/Storage: -40 to 85°C (with no icing or condensation)
 Note: The UL temperature rating for M12 Pre-wired Connector Models is -25 to 70°C.

Ambient humidity range

Operating/Storage: 35% to 95% (with no condensation)

Temperature influence

±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C
 ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

Voltage influence

±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance
 (destruction)

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance
 (destruction)

500 m/s2 10 times
 each in X, Y, and Z
 directions

1,000 m/s2 10 times each in X, Y, and Z directions

Degree of protection

Pre-wired Models, Pre-wired Connector Models: IEC 60529:IP67, ISO 20653 (old
 standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's
 Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K
 2241:2000; Temperature: 35°C max.)
 Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART9):
 IP69K

Connection method

Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
 (Standard cable length: 0.3 m) and Connector Models (M12 Connector, M8 (4-pin)
 Connector and M8 (3-pin) Connector)

Weight *5
 (packed
 state)

Pre-wired

Approx. 85 g

Approx. 95 g

Approx. 170 g

Approx. 240 g

M12 Pre-wired
 Smartclick
 Connector

Approx. 55 g

Approx. 70 g

Approx. 105 g

Approx. 170 g

Connector

Approx. 40 g
 (M8/M12
 Connector)

Approx. 55 g

Approx. 85 g

Approx. 160 g

Materials

Case

Stainless (SUS303)

Nickel-plated brass

Sensing surface

Polybutylene terephthalat (PBT)

Clamping nuts

Nickel-plated brass

Toothed washers

Zinc-plated iron

Cable

Vinyl chloride (PVC)

Main IO-Link functions *2

Operation mode switching between NO and NC, self diagnosis enabling, excessive
 proximity judgment distance selecting, timer function of the control output and timer
 time selecting, instability output (IO-Link mode) ON delay timer time selecting
 function, monitor output, operating hours read-out, readout of the sensor internal
 temperature, and initial reset

IO-Link
 Commun-
 ication
 specifica-
 tions *2

IO-Link
 specification

Ver1.1

Baud rate

COM2 (38.4 kbps), COM3 (230.4 kbps)

Data length

PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)

Minimum cycle
 time

COM2: 2.3 ms, COM3: 0.4 ms

Accessories

Instruction manual, Clamping nuts, Toothed washer

Types

Single distance model

Size

M8

M12

M18

M30

Model

E2E-X1R5[]8

E2E-X2[]12

E2E-X5[]18

E2E-X10[]30

Sensing distance

1.5 mm±10%

2 mm±10%

5 mm±10%

10 mm±10%

Setting distance

0 to 1.2 mm

0 to 1.6 mm

0 to 4 mm

0 to 8 mm

Differential travel

10% max. of sensing distance

Detectable object

Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.)

Standard sensing object

Iron,
 8 × 8 × 1 mm

Iron,
 12 × 12 × 1 mm

Iron,
 18 × 18 × 1 mm

Iron,
 30 × 30 × 1 mm

Response frequency *1

2,000 Hz

1,500 Hz

600 Hz

400 Hz

Power supply voltage

10 to 30 VDC (including 10% ripple (p-p)), Class 2

Current consumption

1-output models: 16 mA max.
 2-output models: 20 mA max.

Output configuration

B[] Models: PNP open collector
 C[] Models: NPN open collector

Operation mode
 (with sensing object
 approaching)

1-output models (B1, C1): NO (Normally open),
 1-output models (B2, C2): NC (Normally closed),
 2-output models (B3, C3): NO+NC (Normally open, Normally closed) *3

Control
 output

Load current

1-output models:
 10 to 30 VDC, Class 2,
 200 mA max., (-40 to
 70°C), 100 mA max.,
 (70 to 85°C)
 2-output models:
 10 to 30 VDC, Class 2,
 50 mA max.

1-output models:
 10 to 30 VDC, Class 2, 200 mA max.,
 2-output models:
 10 to 30 VDC, Class 2, 100 mA max.

Residual voltage

1-output models:
 2 V max. (Load current:
 200 mA, Cable length:
 2 m),
 2-output models:
 2 V max. (Load current:
 50 mA, Cable length:
 2 m)

1-output models:
 2 V max. (Load current: 200 mA, Cable length: 2 m),
 2-output models:
 2 V max. (Load current: 100 mA, Cable length: 2 m)

Indicator *2

In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
 communication indicator (green, not lit)
 In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and
 communication indicator (green, blinking at 1 s intervals)

Protection circuits

Power supply reverse polarity protection, Surge suppressor, Output short-circuit
 protection, Output reverse polarity protection

Ambient temperature range

Operating/Storage: -40 to 85°C (with no icing or condensation)
 Note: The UL temperature rating for M12 Pre-wired Connector Models is -25 to 70°C.

Ambient humidity range

Operating/Storage: 35% to 95% (with no condensation)

Temperature influence

±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C
 ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

Voltage influence

±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance
 (destruction)

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance
 (destruction)

500 m/s2 10 times
 each in X, Y, and Z
 directions

1,000 m/s2 10 times each in X, Y, and Z directions

Degree of protection

Pre-wired Models, Pre-wired Connector Models: IEC 60529:IP67, ISO 20653 (old
 standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's
 Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K
 2241:2000; Temperature: 35°C max.)
 Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART9):
 IP69K

Connection method

Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
 (Standard cable length: 0.3 m) and Connector Models (M12 Connector, M8 (4-pin)
 Connector and M8 (3-pin) Connector)

Weight *5
 (packed
 state)

Pre-wired

Approx. 85 g

Approx. 95 g

Approx. 170 g

Approx. 240 g

M12 Pre-wired
 Smartclick
 Connector

Approx. 55 g

Approx. 70 g

Approx. 105 g

Approx. 170 g

Connector

Approx. 40 g
 (M8/M12
 Connector)

Approx. 55 g

Approx. 85 g

Approx. 160 g

Materials

Case

Stainless (SUS303)

Nickel-plated brass

Sensing surface

Polybutylene terephthalat (PBT)

Clamping nuts

Nickel-plated brass

Toothed washers

Zinc-plated iron

Cable

Vinyl chloride (PVC)

Main IO-Link functions *2

Operation mode switching between NO and NC, self diagnosis enabling, excessive
 proximity judgment distance selecting, timer function of the control output and timer
 time selecting, instability output (IO-Link mode) ON delay timer time selecting
 function, monitor output, operating hours read-out, readout of the sensor internal
 temperature, and initial reset

IO-Link
 Commun-
 ication
 specifica-
 tions *2

IO-Link
 specification

Ver1.1

Baud rate

COM2 (38.4 kbps), COM3 (230.4 kbps)

Data length

PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)

Minimum cycle
 time

COM2: 2.3 ms, COM3: 0.4 ms

Accessories

Instruction manual, Clamping nuts, Toothed washer

1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
 2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
 3. Dual-output specification for the M8-size models is only applicable to long-size M12 Connector models.
 4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil resistance indicates the median value of the product design and the oil resistance performance criterion result (=Typical value). Actual performance can be expected to decline after two years on average from shipment. The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5 NEXT series
 correctly. The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.
 5. Weight of the standard body-sized model.

DC 3-wire (Double/Single distance model)

Unshielded

Types

Double distance model

Size

M8

M12

M18

M30

Model

E2E-X4M[]8

E2E-X8M[]12

E2E-X16M[]18

E2E-X30M[]30

Sensing distance

4 mm±10%

8 mm±10%

16 mm±10%

30 mm±10%

Setting distance

0 to 3.2 mm

0 to 6.4 mm

0 to 12.8 mm

0 to 24 mm

Differential travel

15% max. of sensing distance

Detectable object

Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.)

Standard sensing object

Iron,
 12 × 12 × 1 mm

Iron,
 24 × 24 × 1 mm

Iron,
 48 × 48 × 1 mm

Iron,
 90 × 90 × 1 mm

Response frequency *1

1,000 Hz

800 Hz

400 Hz

100 Hz

Power supply voltage

10 to 30 VDC (including 10% ripple (p-p)), Class 2

Current consumption

1-output models: 16 mA max.
 2-output models: 20 mA max.

Output configuration

B[] Models: PNP open collector
 C[] Models: NPN open collector

Operation mode
 (with sensing object
 approaching)

1-output models (B1, C1): NO (Normally open),
 1-output models (B2, C3): NC (Normally closed)
 2-output models (B3, C3): NO+NC (Normally open, Normally closed) *3

Control
 output

Load current

1-output models:
 10 to 30 VDC, Class 2,
 200 mA max., (-40 to
 70°C), 100 mA max.,
 (70 to 85°C)
 2-output models:
 10 to 30 VDC, Class 2,
 50 mA max.

1-output models:
 10 to 30 VDC, Class 2, 200 mA max.,
 2-output models:
 10 to 30 VDC, Class 2, 100 mA max.

Residual voltage

1-output models:
 2 V max. (Load current:
 200 mA, Cable length:
 2 m),
 2-output models:
 2 V max. (Load current:
 50 mA, Cable length:
 2 m)

1-output models:
 2 V max. (Load current: 200 mA, Cable length: 2 m),
 2-output models:
 2 V max. (Load current: 100 mA, Cable length: 2 m)

Indicator *2

In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
 communication indicator (green, not lit)
 In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and
 communication indicator (green, blinking at 1 s intervals)

Protection circuits

Power supply reverse polarity protection, Surge suppressor, Output short-circuit
 protection, Output reverse polarity protection

Ambient temperature range

Operating/Storage: -40 to 85°C (with no icing or condensation)
 Note: The UL temperature rating for M12 Pre-wired Connector Models is -25 to 70°C.

Ambient humidity range

Operating/Storage: 35% to 95% (with no condensation)

Temperature influence

±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C
 ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

Voltage influence

±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance
 (destruction)

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance
 (destruction)

500 m/s2 10 times
 each in X, Y, and Z
 directions

1,000 m/s2 10 times each in X, Y, and Z directions

Degree of protection

Pre-wired Models, Pre-wired Connector Models: IEC 60529:IP67, ISO 20653 (old
 standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's
 Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K
 2241:2000; Temperature: 35°C max.)
 Connector Models: IEC 60529:IP67, ISO 20653 (old standard: DIN 40050 PART9):
 IP69K

Connection method

Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
 (Standard cable length: 0.3 m) and Models (M12 Connector, M8 (4-pin) Connector and
 M8 (3-pin) Connector)

Weight *5
 (packed
 state)

Pre-wired

Approx. 85 g

Approx. 95 g

Approx. 170 g

Approx. 280 g

M12 Pre-wired
 Smartclick
 Connector

Approx. 55 g

Approx. 70 g

Approx. 105 g

Approx. 220 g

Connector

Approx. 40 g
 (M8/M12
 Connector)

Approx. 55 g

Approx. 85 g

Approx. 200 g

Materials

Case

Stainless (SUS303)

Nickel-plated brass

Sensing surface

Polybutylene terephthalat (PBT)

Clamping nuts

Nickel-plated brass

Toothed washers

Zinc-plated iron

Cable

Vinyl chloride (PVC)

Main IO-Link functions *2

Operation mode switching between NO and NC, self diagnosis enabling, excessive
 proximity judgment distance selecting, timer function of the control output and timer
 time selecting, instability output (IO-Link mode) ON delay timer time selecting
 function, monitor output, operating hours read-out, readout of the sensor internal
 temperature, and initial reset

IO-Link
 Commun-
 ication
 specifica-
 tions *2

IO-Link
 specification

Ver 1.1

Baud rate

COM2 (38.4 kbps), COM3 (230.4 kbps)

Data length

PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)

Minimum cycle
 time

COM2: 2.3 ms, COM3: 0.4 ms

Accessories

Instruction manual, Clamping nuts, Toothed washer

Types

Single distance model

Size

M8

M12

M18

M30

Model

E2E-X2M[]8

E2E-X5M[]12

E2E-X10M[]18

E2E-X18M[]30

Sensing distance

2 mm±10%

5 mm±10%

10 mm±10%

18 mm±10%

Setting distance

0 to 1.6 mm

0 to 4 mm

0 to 8 mm

0 to 14.4 mm

Differential travel

10% max. of sensing distance

Detectable object

Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.)

Standard sensing object

Iron,
 8 × 8 × 1 mm

Iron,
 15 × 15 × 1 mm

Iron,
 30 × 30 × 1 mm

Iron,
 54 × 54 × 1 mm

Response frequency *1

1,000 Hz

800 Hz

400 Hz

100 Hz

Power supply voltage

10 to 30 VDC (including 10% ripple (p-p)), Class 2

Current consumption

1-output models: 16 mA max.
 2-output models: 20 mA max.

Output configuration

B[] Models: PNP open collector
 C[] Models: NPN open collector

Operation mode
 (with sensing object
 approaching)

1-output models (B1, C1): NO (Normally open),
 1-output models (B2, C3): NC (Normally closed)
 2-output models (B3, C3): NO+NC (Normally open, Normally closed) *3

Control
 output

Load current

1-output models:
 10 to 30 VDC, Class 2,
 200 mA max., (-40 to
 70°C), 100 mA max.,
 (70 to 85°C)
 2-output models:
 10 to 30 VDC, Class 2,
 50 mA max.

1-output models:
 10 to 30 VDC, Class 2, 200 mA max.,
 2-output models:
 10 to 30 VDC, Class 2, 100 mA max.

Residual voltage

1-output models:
 2 V max. (Load current:
 200 mA, Cable length:
 2 m),
 2-output models:
 2 V max. (Load current:
 50 mA, Cable length:
 2 m)

1-output models:
 2 V max. (under load current of 200 mA with
 cable length of 2 m),
 2-output models:
 2 V max. (under load current of 100 mA with
 cable length of 2 m)

Indicator *2

In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
 communication indicator (green, not lit)
 In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and
 communication indicator (green, blinking at 1 s intervals)

Protection circuits

Power supply reverse polarity protection, Surge suppressor, Output short-circuit
 protection, Output reverse polarity protection

Ambient temperature range

Operating/Storage: -40 to 85°C (with no icing or condensation)
 Note: The UL temperature rating for M12 Pre-wired Connector Models is -25 to 70°C.

Ambient humidity range

Operating/Storage: 35% to 95% (with no condensation)

Temperature influence

±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C
 ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

Voltage influence

±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance
 (destruction)

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance
 (destruction)

500 m/s2 10 times
 each in X, Y, and Z
 directions

1,000 m/s2 10 times each in X, Y, and Z directions

Degree of protection

Pre-wired Models, Pre-wired Connector Models: IEC 60529:IP67, ISO 20653 (old
 standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's
 Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K
 2241:2000; Temperature: 35°C max.)
 Connector Models: IEC 60529:IP67, ISO 20653 (old standard: DIN 40050 PART9):
 IP69K

Connection method

Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
 (Standard cable length: 0.3 m) and Models (M12 Connector, M8 (4-pin) Connector and
 M8 (3-pin) Connector)

Weight *5
 (packed
 state)

Pre-wired

Approx. 85 g

Approx. 95 g

Approx. 170 g

Approx. 240 g

M12 Pre-wired
 Smartclick
 Connector

Approx. 55 g

Approx. 70 g

Approx. 105 g

Approx. 170 g

Connector

Approx. 40 g
 (M8/M12
 Connector)

Approx. 55 g

Approx. 85 g

Approx. 160 g

Materials

Case

Stainless (SUS303)

Nickel-plated brass

Sensing surface

Polybutylene terephthalat (PBT)

Clamping nuts

Nickel-plated brass

Toothed washers

Zinc-plated iron

Cable

Vinyl chloride (PVC)

Main IO-Link functions *2

Operation mode switching between NO and NC, self diagnosis enabling, excessive
 proximity judgment distance selecting, timer function of the control output and timer
 time selecting, instability output (IO-Link mode) ON delay timer time selecting
 function, monitor output, operating hours read-out, readout of the sensor internal
 temperature, and initial reset

IO-Link
 Commun-
 ication
 specifica-
 tions *2

IO-Link
 specification

Ver 1.1

Baud rate

COM2 (38.4 kbps), COM3 (230.4 kbps)

Data length

PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)

Minimum cycle
 time

COM2: 2.3 ms, COM3: 0.4 ms

Accessories

Instruction manual, Clamping nuts, Toothed washer

1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
 2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
 3. Dual-output specification for the M8-size models is only applicable to long-size M12 Connector models.
 4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical value). Actual performance can be expected to decline after two years on average from shipment. The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5 NEXT series
 correctly. The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.
 5. Weight of the standard body-sized model.

DC 2-wire (Triple distance model)

DC 2-wire (Triple distance model)

Size

M8

M12

Shielded

Shielded

Unshielded

Shielded

Unshielded

Model

E2E-X3D[]

E2E-X6MD[]

E2E-X7D[]

E2E-X10MD[]

Sensing distance

3 mm ±10%

6 mm ±10%

7 mm ±10%

10 mm ±10%

Setting distance *1

0 to 2.4 mm

0 to 4.8 mm

0 to 5.6 mm

0 to 8 mm

Differential travel

15% max. of sensing distance

Detectable object

Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
 Engineering Data on Catalog.)

Standard sensing object

Iron,
 9 × 9 × 1 mm

Iron,
 18 × 18 × 1 mm

Iron,
 21 × 21 × 1 mm

Iron,
 30 × 30 × 1 mm

Response frequency *2

350 Hz

250 Hz

350 Hz

200 Hz

Power supply voltage

10 to 30 VDC, (including 10% ripple (p-p))

Leakage current

0.8 mA max.

Control
 output

Load current

3 to 100 mA

Residual
 voltage

Polarity: 3 V max. (Load current: 100 mA, Cable length: 2 m)
 No polarity: 5 V max. (Load current: 100 mA, Cable length: 2 m)

Indicator

D1 Models: Operation indicator (orange), Setting indicator (green)
 D2 Models: Operation indicator (orange)

Operation mode

D1 Models: NO
 D2 Models: NC
 Refer to the timing charts under I/O Circuit Diagrams on Catalog for details.

Protection circuits

Surge suppressor, Load short-circuit protection

Ambient temperature
 range

Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)

Ambient humidity range

Operating and Storage: 35% to 95% (with no condensation)

Temperature influence

±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

Voltage influence

±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance
 (destruction)

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance
 (destruction)

500 m/s2 10 times each in X, Y, and Z
 directions

1,000 m/s2 10 times each in X, Y, and Z
 directions

Degree of protection

Pre-wired Models/Pre-wired Connector Models: IP67 (IEC 60529), IP67G *3 (JIS C 0920
 Annex 1) Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil
 type: specified in JIS K 2241:2000, Temperature: 35 °C max.) and ISO 20653 (old standard:
 DIN 40050 PART9) IP69K

Connecting method

Pre-wired Models (Standard cable length: 2 m) and Pre-wired Connector Models (Standard
 cable length: 0.3 m)

Weight
 (packed
 state)

Pre-wired
 Models

Approx. 60 g

Approx. 70 g

Pre-wired
 Connector
 Models

Approx. 30 g

Approx. 40 g

Materials

Case

Nickel-plated brass

Stainless steel
 (SUS303)

Nickel-plated brass

Sensing
 surface

Polybutylene terephthalate (PBT)

Clamping
 nuts

Nickel-plated brass

Toothed
 washer

Zinc-plated iron

Cable

Vinyl chloride (PVC)

Accessories

Instruction manual, Clamping nuts, Toothed washer

Size

M18

M30

Shielded

Shielded

Unshielded

Shielded

Unshielded

Model

E2E-X11D[]

E2E-X20MD[]

E2E-X20D[]

E2E-X40MD[]

Sensing distance

11 mm ±10%

20 mm ±10%

20 mm ±10%

40 mm ±10%

Setting distance *1

0 to 8.8 mm

0 to 16 mm

0 to 16 mm

0 to 32 mm

Differential travel

15% max. of sensing distance

Detectable object

Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
 Engineering Data on Catalog.)

Standard sensing object

Iron,
 33 × 33 × 1 mm

Iron,
 60 × 60 × 1 mm

Iron,
 60 × 60 × 1 mm

Iron,
 120 × 120 × 1 mm

Response frequency *2

250 Hz

200 Hz

200 Hz

50 Hz

Power supply voltage

10 to 30 VDC, (including 10% ripple (p-p))

Leakage current

0.8 mA max.

Control
 output

Load current

3 to 100 mA

Residual
 voltage

Polarity: 3 V max. (Load current: 100 mA, Cable length: 2 m)
 No polarity: 5 V max. (Load current: 100 mA, Cable length: 2 m)

Indicator

D1 Models: Operation indicator (orange), Setting indicator (green)
 D2 Models: Operation indicator (orange)

Operation mode

D1 Models: NO
 D2 Models: NC
 Refer to the timing charts under I/O Circuit Diagrams on Catalog for details.

Protection circuits

Surge suppressor, Load short-circuit protection

Ambient temperature
 range

Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)

Ambient humidity range

Operating and Storage: 35% to 95% (with no condensation)

Temperature influence

±20% max. of sensing
 distance at 23°C in
 the temperature
 range of -25 to 70°C

±10% max. of sensing
 distance at 23°C in
 the temperature
 range of -25 to 70°C

±20% max. of sensing distance at 23°C in
 the temperature range of -25 to 70°C

Voltage influence

±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance
 (destruction)

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance
 (destruction)

1,000 m/s2 10 times each in X, Y, and Z directions

Degree of protection

Pre-wired Models/Pre-wired Connector Models: IP67 (IEC 60529), IP67G *3 (JIS C 0920
 Annex 1) Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil
 type: specified in JIS K 2241:2000, Temperature: 35 °C max.) and ISO 20653 (old standard:
 DIN 40050 PART9) IP69K

Connecting method

Pre-wired Models (Standard cable length: 2 m) and Pre-wired Connector Models (Standard
 cable length: 0.3 m)

Weight
 (packed
 state)

Pre-wired
 Models

Approx. 130 g

Approx. 150 g

Approx. 180 g

Approx. 210 g

Pre-wired
 Connector
 Models

Approx. 70 g

Approx. 90 g

Approx.110 g

Approx. 140 g

Materials

Case

Nickel-plated brass

Sensing
 surface

Polybutylene terephthalate (PBT)

Clamping
 nuts

Nickel-plated brass

Toothed
 washer

Zinc-plated iron

Cable

Vinyl chloride (PVC)

Accessories

Instruction manual, Clamping nuts, Toothed washer

1. Use the Sensor within the range in which the setting indicator (green LED) is ON (except D2 Models).
 2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
 3. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards). The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance to oil.
 4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical value). The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5 NEXT series correctly. The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.

DC 2-wire (Standard/ Double/ Single distance model)

DC 2-wire (Standard model)

Size

M8

M12

Shielded

Shielded

Unshielded

Shielded

Unshielded

Item Model

E2E-X2D[]

E2E-X4MD[]

E2E-X3D[]

E2E-X8MD[]

Sensing distance

2 mm ±10%

4 mm ±10%

3 mm ±10%

8 mm ±10%

Setting distance *1

0 to 1.6 mm

0 to 3.2 mm

0 to 2.4 mm

0 to 6.4 mm

Differential travel

15% max. of sensing distance

10% max. of sensing distance

Detectable object

Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
 Engineering Data on Catalog.)

Standard sensing object

Iron,
 8 × 8 × 1 mm

Iron,
 20 × 20 × 1 mm

Iron,
 12 × 12 × 1 mm

Iron,
 30 × 30 × 1 mm

Response frequency *2

1.5 kHz

1 kHz

1 kHz

0.8 kHz

Power supply voltage

12 to 24 VDC (including 10% ripple (p-p)), Class 2

Leakage current

0.8 mA max.

Control
 output

Load current

3 to 100 mA

Residual
 voltage

Polarity: 3 V max. (Load current: 100 mA, Cable length: 2 m)
 No polarity: 5 V max. (Load current: 100 mA, Cable length: 2 m)

Indicator

D1 Models: Operation indicator (orange), Setting indicator (green)
 D2 Models: Operation indicator (orange)

Operation mode

D1 Models: NO
 D2 Models: NC
 Refer to the timing charts under I/O Circuit Diagrams on Catalog for details.

Protection circuits

Surge suppressor, Load short-circuit protection

Ambient temperature range

Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)

Ambient humidity range

Operating and Storage: 35% to 95% (with no condensation)

Temperature influence

±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

Voltage influence

±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance
 (destruction)

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance
 (destruction)

500 m/s2 10 times each in X, Y, and Z
 directions

1,000 m/s2 10 times each in X, Y, and Z
 directions

Degree of protection

Pre-wired Models/Pre-wired Connector Models:
 IP67 (IEC 60529), IP67G *3 (JIS C 0920 Annex 1)
 Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil type:
 specified in JIS K 2241:2000, Temperature:
 35°C max.) and ISO 20653 (old standard: DIN 40050 PART9) IP69K

Connecting method

Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard
 cable length: 0.3 m),
 M8 Connector Models and M12 Connector Models

Weight *5
 (packed
 state)

Pre-wired Models

Approx. 60 g

Approx. 70 g

Pre-wired
 Connector Models

Approx. 30 g

Approx. 40 g

Connector Models

Approx. 40 g (M8/M12 Connector)

Approx. 55 g

Materials

Case

M8 Size: Stainless steel (SUS303), M12/M18/M30 Size: Nickel-plated brass

Sensing surface

Polybutylene terephthalate (PBT)

Clamping nuts

Nickel-plated brass

Toothed washer

Zinc-plated iron

Cable

Vinyl chloride (PVC)

Accessories

Instruction manual, Clamping nuts, Toothed washer

Size

M18

M30

Shielded

Shielded

Unshielded

Shielded

Unshielded

Item Model

E2E-X7D[]

E2E-X14MD[]

E2E-X10D[]

E2E-X20MD[]

Sensing distance

7 mm ±10%

14 mm ±10%

10 mm ±10%

20 mm ±10%

Setting distance *1

0 to 5.6 mm

0 to 11.2 mm

0 to 8 mm

0 to 16 mm

Differential travel

15% max. of sensing distance

10% max. of sensing distance

Detectable object

Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
 Engineering Data on Catalog.)

Standard sensing object

Iron,
 18 × 18 × 1 mm

Iron,
 30 × 30 × 1 mm

Iron,
 30 × 30 × 1 mm

Iron,
 54 × 54 × 1 mm

Response frequency *2

0.5 kHz

0.4 kHz

0.4 kHz

0.1 kHz

Power supply voltage

12 to 24 VDC (including 10% ripple (p-p)), Class 2

Leakage current

0.8 mA max.

Control
 output

Load current

3 to 100 mA

Residual
 voltage

Polarity: 3 V max. (Load current: 100 mA, Cable length: 2 m)
 No polarity: 5 V max. (Load current: 100 mA, Cable length: 2 m)

Indicator

D1 Models: Operation indicator (orange), Setting indicator (green)
 D2 Models: Operation indicator (orange)

Operation mode

D1 Models: NO
 D2 Models: NC
 Refer to the timing charts under I/O Circuit Diagrams on Catalog for details.

Protection circuits

Surge suppressor, Load short-circuit protection

Ambient temperature range

Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)

Ambient humidity range

Operating and Storage: 35% to 95% (with no condensation)

Temperature influence

±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

Voltage influence

±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance
 (destruction)

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance
 (destruction)

1,000 m/s2 10 times each in X, Y, and Z directions

Degree of protection

Pre-wired Models/Pre-wired Connector Models:
 IP67 (IEC 60529), IP67G *3 (JIS C 0920 Annex 1)
 Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil type:
 specified in JIS K 2241:2000, Temperature:
 35°C max.) and ISO 20653 (old standard: DIN 40050 PART9) IP69K

Connecting method

Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard
 cable length: 0.3 m),
 M8 Connector Models and M12 Connector Models

Weight *5
 (packed
 state)

Pre-wired Models

Approx. 130 g

Approx. 150 g

Approx. 180 g

Approx. 210 g

Pre-wired
 Connector Models

Approx. 70 g

Approx. 90 g

Approx. 110 g

Approx. 140 g

Connector Models

Approx. 85 g

Approx. 80 g

Approx. 160 g

Approx. 150 g

Materials

Case

M8 Size: Stainless steel (SUS303), M12/M18/M30 Size: Nickel-plated brass

Sensing surface

Polybutylene terephthalate (PBT)

Clamping nuts

Nickel-plated brass

Toothed washer

Zinc-plated iron

Cable

Vinyl chloride (PVC)

Accessories

Instruction manual, Clamping nuts, Toothed washer

1. Use the Sensor within the range in which the setting indicator (green LED) is ON (except D2 Models).
 2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard.
 3. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards). The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance  to oil.
 4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical value).
 The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5 NEXT series correctly. The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.
 5. Weight of the standard body-sized model.

DC 2-wire (Double distance model)

Size

M12

M18

M30

Shielded

Shielded

Unshielded

Shielded

Shielded

Unshielded

Item Model

E2E-X4D[]

E2E-X8D[]

E2E-X16MD[]

E2E-X15D[]

E2E-X30MD[]

Sensing distance

4 mm ±10%

8 mm ±10%

16 mm ±10%

15 mm ±10%

30 mm ±10%

Setting distance *1

0 to 3.2 mm

0 to 6.4 mm

0 to 12.8 mm

0 to 12 mm

0 to 24 mm

Differential travel

15% max. of sensing distance

Detectable object

Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
 Engineering Data on Catalog.)

Standard sensing object

Iron,
 12 × 12 × 1 mm

Iron,
 18 × 18 × 1 mm

Iron,
 45 × 45 × 1 mm

Iron,
 30 × 30 × 1 mm

Iron,
 70 × 70 × 1 mm

Response frequency *2

1 kHz

0.5 kHz

0.4 kHz

0.25 kHz

0.1 kHz

Power supply voltage

12 to 24 VDC (including 10% ripple (p-p)), Class 2

Leakage current

0.8 mA max.

Control
 output

Load current

3 to 100 mA

Residual
 voltage

5 V max. (Load current: 100 mA, Cable length: 2 m)

Indicator

D1 Models: Operation indicator (orange), Setting indicator (green)
 D2 Models: Operation indicator (orange)

Operation mode

D1 Models: NO
 D2 Models: NC
 Refer to the timing charts under I/O Circuit Diagrams on Catalog for details.

Protection circuits

Surge suppressor, Load short-circuit protection

Ambient temperature
 range

Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)

Ambient humidity range

Operating and Storage: 35% to 95% (with no condensation)

Temperature influence

±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

Voltage influence

±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance
 (destruction)

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance
 (destruction)

500 m/s2 10 times
 each in X, Y, and Z
 directions

1,000 m/s2 10 times each in X, Y, and Z directions

Degree of protection

Pre-wired Models/Pre-wired Connector Models:
 IP67 (IEC 60529), IP67G *3 (JIS C 0920 Annex 1)
 Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil type:
 specified in JIS K 2241:2000,
 Temperature: 35°C max.) and ISO 20653 (old standard: DIN 40050 PART9) IP69K

Connecting method

Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard
 cable length: 0.3 m)

Weight
 (packed
 state)

Pre-wired
 Models

Approx. 70 g

Approx. 130 g

Approx. 150 g

Approx. 180 g

Approx. 210 g

Pre-wired
 Connector
 Models

Approx. 40 g

Approx. 70 g

Approx. 90 g

Approx. 110 g

Approx. 140 g

Materials

Case

Nickel-plated brass

Sensing surface

Polybutylene terephthalate (PBT)

Clamping nuts

Nickel-plated brass

Toothed washer

Zinc-plated iron

Cable

Vinyl chloride (PVC)

Accessories

Instruction manual, Clamping nuts, Toothed washer

1. Use the Sensor within the range in which the setting indicator (green LED) is ON (except D2 Models).
 2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard.
 3. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards). The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance to oil.
 4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical value).
 The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5 NEXT series correctly.
 The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.

DC 2-wire (Single distance model)

Size

M8

M12

M18

Shielded

Shielded

Model

E2E-X1R5D[]

E2E-X2R5D[]

E2E-X5D[]

Sensing distance

1.5 mm ±10%

2.5 mm ±10%

5 mm ±10%

Setting distance *1

0 to 1.2 mm

0 to 2 mm

0 to 4 mm

Differential travel

10% max. of sensing distance

Detectable object

Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
 Engineering Data on Catalog.)

Standard sensing object

Iron, 10 × 10 × 1 mm

Iron, 12 × 12 × 1 mm

Iron, 18 × 18 × 1 mm

Response frequency *2

250 Hz

250 Hz

250 Hz

Power supply voltage

10 to 30 VDC, (including 10% ripple (p-p))

Leakage current

0.8 mA max.

Control
 output

Load current

3 to 100 mA

Residual
 voltage

Polarity: 3 V max. (Load current: 100 mA, Cable length: 2 m)
 No polarity: 5 V max. (Load current: 100 mA, Cable length: 2 m)

Indicator

D1 Models: Operation indicator (orange), Setting indicator (green)
 D2 Models: Operation indicator (orange)

Operation mode

D1 Models: NO
 D2 Models: NC
 Refer to the timing charts under I/O Circuit Diagrams on Catalog for details.

Protection circuits

Surge suppressor, Load short-circuit protection

Ambient temperature
 range

Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)

Ambient humidity range

Operating and Storage: 35% to 95% (with no condensation)

Temperature influence

±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

Voltage influence

±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance
 (destruction)

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance
 (destruction)

500 m/s2 10 times each in X,
 Y, and Z directions

1,000 m/s2 10 times each in X, Y, and Z directions

Degree of protection

Pre-wired Models/Pre-wired Connector Models: IP67 (IEC 60529), IP67G *3 (JIS C 0920
 Annex 1) Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil
 type: specified in JIS K 2241:2000, Temperature: 35°C max.) and ISO 20653 (old standard:
 DIN 40050 PART9) IP69K

Connecting method

Pre-wired Models (Standard cable length: 2 m) and Pre-wired Connector Models (Standard
 cable length: 0.3 m)

Weight
 (packed
 state)

Pre-wired
 Models

Approx. 60 g

Approx. 70 g

Approx. 130 g

Pre-wired
 Connector
 Models

Approx. 30 g

Approx. 40 g

Approx. 70 g

Materials

Case

Stainless steel (SUS303)

Nickel-plated brass

Sensing
 surface

Polybutylene terephthalate (PBT)

Clamping
 nuts

Nickel-plated brass

Toothed
 washer

Zinc-plated iron

Cable

Vinyl chloride (PVC)

Accessories

Instruction manual, Clamping nuts, Toothed washer

1. Use the Sensor within the range in which the setting indicator (green LED) is ON (except D2 Models).
 2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard.
 3. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards). The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance to oil.
 4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical value). The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5  NEXT series correctly. The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.